Powermatic Associates Logo

3044542 Phoenix Contact Terminal Blocks

3044542 on Powermatic Associates
Phoenix Contact

Part#:3044542

Manufacturer:Phoenix Contact

Category:Terminal Blocks

Product Lifecycle:Active

32 in stock

Mar 14, 2025

Product description

Feed-through terminal block, nom. voltage: 500 V, nominal current: 24 A, connection method: Screw connection, number of connections: 4, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 46.9 mm, color: gray, mounting type: NS 35/7,5, N

Product Details

  • Color
    gray
  • Flammability rating according to UL 94
    V0
  • Nominal voltage UN
    500 V
  • Rated surge voltage
    6 kV
  • Back of the hand protection
    guaranteed
  • Potentials
    1
  • Degree of pollution
    3
  • Result of power-frequency withstand voltage test
    Test passed
  • Result of flexion and pull-out test
    Test passed
  • Number of connections
    4
  • Area of application
    Railway industry
  • Finger protection
    guaranteed
  • Result of surge voltage test
    Test passed
  • Bending test turns
    135
  • Tight fit on carrier
    NS 35
  • Setpoint
    1 N
  • Short-time current
    0.48 kA
  • Bending test rotation speed
    10 rpm
  • ASD level
    1.857 (m/s2)2/Hz
  • Shock form
    Half-sine
  • Shock test result
    Test passed
  • ECLASS 5.1
    27141100
  • Result of voltage-drop test
    Test passed
  • Overvoltage category
    III
  • Power frequency withstand voltage setpoint
    1.89 kV
  • Result of temperature-rise test
    Test passed
  • Number of levels
    1
  • Insulating material
    PA
  • Open side panel
    Yes
  • Result of tight fit on support
    Test passed
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • Nominal cross section
    2.5 mm²
  • Nominal current IN
    24 A
  • Insulating material group
    I
  • Maximum load current
    30 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
  • Acceleration
    5g
  • Height NS 35/15
    55 mm
  • Conductor cross section AWG max.
    12
  • ECLASS 11.0
    27141120
  • Shock protection test specification
    DIN EN 50274 (VDE 0660-514):2002-11
  • Test duration per axis
    5 h
  • Short circuit stability result
    Test passed
  • Oscillation, broadband noise test result
    Test passed
  • Shock duration
    30 ms
  • Number of shocks per direction
    3
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • Width
    5.2 mm
  • Stripping length
    9 mm
  • Conductor cross section flexible min.
    0.14 mm²
  • Maximum power dissipation for nominal condition
    0.77 W
  • Tensile test result
    Test passed
  • Result of thermal test
    Test passed
  • Test specification, shock test
    DIN EN 50155 (VDE 0115-200):2008-03
  • Bending test conductor cross section/weight
    0.14 mm² / 0.2 kg
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Test frequency
    f1 = 5 Hz to f2 = 150 Hz
  • Test spectrum
    Service life test category 1, class B, body mounted
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    27,5 MJ/kg
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Height NS 35/7,5
    47.5 mm
  • Screw thread
    M3
  • Conductor cross section short circuit testing
    4 mm²
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2008-03
  • Static insulating material application in cold
    -60 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Height
    46.9 mm
  • Tightening torque max
    0.6 Nm
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    0.14 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    2.5 mm²
  • 2 conductors with same cross section, stranded min.
    0.14 mm²
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • ECLASS 4.1
    27141100
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Length
    65.4 mm
  • Tightening torque, min
    0.5 Nm
  • Min. AWG conductor cross section, flexible
    26
  • Max. AWG conductor cross section, flexible
    12
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    1 mm²
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
    1.5 mm²
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • ECLASS 4.0
    27141100
  • ETIM 3.0
    EC000901
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    125 °C
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • End cover width
    2.2 mm
  • Connection method
    Screw connection
  • Connection in acc. with standard
    CSA
  • Conductor cross section solid max.
    4 mm²
  • Conductor cross section AWG min.
    26
  • 2 conductors with same cross section, solid max.
    1.5 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
    0.5 mm²
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ECLASS 10.0.1
    27141120
  • ECLASS 6.0
    27141100
  • ETIM 6.0
    EC000897
  • ETIM 7.0
    EC000897
  • Conductor cross section solid min.
    0.14 mm²
  • Conductor cross section flexible max.
    4 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    2.5 mm²
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
    0.14 mm²
  • Internal cylindrical gage
    A3
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ETIM 2.0
    EC000901
  • UNSPSC 13.2
    39121410
  • UNSPSC 21.0
    39121410
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    0.14 mm²
  • 2 conductors with same cross section, solid min.
    0.14 mm²
  • UNSPSC 6.01
    30211811
  • 2 conductors with same cross section, stranded max.
    1.5 mm²
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • ECLASS 5.0
    27141100
  • ECLASS 9.0
    27141120
  • UNSPSC 12.01
    39121410
  • ECLASS 7.0
    27141120
  • ETIM 4.0
    EC000897
  • UNSPSC 11
    39121410
  • UNSPSC 7.0901
    39121410
  • UNSPSC 19.0
    39121410
  • UNSPSC 20.0
    39121410
  • UNSPSC 18.0
    39121410

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Manufacturer warranty

3044542 Phoenix Contact

Get a quick Quote!

Request a quote, and we will send you price within minutes.

Stock:

32

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 3044542 with other products

Color

Flammability rating accor...

Nominal voltage UN

Rated surge voltage

Back of the hand protecti...

Potentials

Degree of pollution

Result of power-frequency...

Result of flexion and pul...

Number of connections

Area of application

Finger protection

Result of surge voltage t...

Bending test turns

Tight fit on carrier

Setpoint

Short-time current

Bending test rotation spe...

ASD level

Shock form

Shock test result

ECLASS 5.1

Result of voltage-drop te...

Overvoltage category

Power frequency withstand...

Result of temperature-ris...

Number of levels

Insulating material

Open side panel

Result of tight fit on su...

Proof of thermal characte...

Nominal cross section

Nominal current IN

Insulating material group

Maximum load current

Acceleration

Height NS 35/15

Conductor cross section A...

ECLASS 11.0

Shock protection test spe...

Test duration per axis

Short circuit stability r...

Oscillation, broadband no...

Shock duration

Number of shocks per dire...

Surface flammability NFPA...

Fire protection for rail ...

Width

Stripping length

Conductor cross section f...

Maximum power dissipation...

Tensile test result

Result of thermal test

Test specification, shock...

Bending test conductor cr...

Result of the test for me...

Requirement temperature-r...

Test frequency

Test spectrum

Relative insulation mater...

Calorimetric heat release...

Fire protection for rail ...

Height NS 35/7,5

Screw thread

Conductor cross section s...

Test specification, oscil...

Static insulating materia...

Fire protection for rail ...

Height

Tightening torque max

Conductor cross section f...

Conductor cross section f...

2 conductors with same cr...

Ambient temperature (actu...

ECLASS 4.1

Test directions

Specific optical density ...

Fire protection for rail ...

Length

Tightening torque, min

Min. AWG conductor cross ...

Max. AWG conductor cross ...

Two conductors with the s...

Two conductors with the s...

Permissible humidity (sto...

ECLASS 4.0

ETIM 3.0

Temperature index of insu...

Smoke gas toxicity NFPA 1...

End cover width

Connection method

Connection in acc. with s...

Conductor cross section s...

Conductor cross section A...

2 conductors with same cr...

Two conductors with the s...

Ambient temperature (asse...

ECLASS 10.0.1

ECLASS 6.0

ETIM 6.0

ETIM 7.0

Conductor cross section s...

Conductor cross section f...

Conductor cross section f...

Two conductors with the s...

Internal cylindrical gage

China RoHS

ETIM 2.0

UNSPSC 13.2

UNSPSC 21.0

Conductor cross section f...

2 conductors with same cr...

UNSPSC 6.01

2 conductors with same cr...

Operating temperature

Ambient temperature (stor...

ECLASS 5.0

ECLASS 9.0

UNSPSC 12.01

ECLASS 7.0

ETIM 4.0

UNSPSC 11

UNSPSC 7.0901

UNSPSC 19.0

UNSPSC 20.0

UNSPSC 18.0

Tractive force setpoint

Conductor cross section t...

Requirements, voltage dro...

Relative insulation mater...

Checking the mechanical s...

Note

Selected product

3044542
32 in stock
3044542
Phoenix Contact

Feed-through terminal block, nom. voltage: 500 V, nominal current: 24 A, connection method: Screw co...

Colorgray

Flammability rating according to UL 94V0

Nominal voltage UN500 V

Rated surge voltage6 kV

Back of the hand protectionguaranteed

Potentials1

Degree of pollution3

Result of power-frequency withstand voltage testTest passed

Result of flexion and pull-out testTest passed

Number of connections4

Area of applicationRailway industry

Finger protectionguaranteed

Result of surge voltage testTest passed

Bending test turns135

Tight fit on carrierNS 35

Setpoint1 N

Short-time current0.48 kA

Bending test rotation speed10 rpm

ASD level1.857 (m/s2)2/Hz

Shock formHalf-sine

Shock test resultTest passed

ECLASS 5.127141100

Result of voltage-drop testTest passed

Overvoltage categoryIII

Power frequency withstand voltage setpoint1.89 kV

Result of temperature-rise testTest passed

Number of levels1

Insulating materialPA

Open side panelYes

Result of tight fit on supportTest passed

Proof of thermal characteristics (needle flame) effective duration30 s

Nominal cross section2.5 mm²

Nominal current IN24 A

Insulating material groupI

Maximum load current30 A (in case of a 4 mm² con...

Acceleration5g

Height NS 35/1555 mm

Conductor cross section AWG max.12

ECLASS 11.027141120

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Test duration per axis5 h

Short circuit stability resultTest passed

Oscillation, broadband noise test resultTest passed

Shock duration30 ms

Number of shocks per direction3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Width5.2 mm

Stripping length9 mm

Conductor cross section flexible min.0.14 mm²

Maximum power dissipation for nominal condition0.77 W

Tensile test resultTest passed

Result of thermal testTest passed

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Screw threadM3

Conductor cross section short circuit testing4 mm²

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height46.9 mm

Tightening torque max0.6 Nm

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²

2 conductors with same cross section, stranded min.0.14 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

Test directionsX-, Y- and Z-axis (pos. and ...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Length65.4 mm

Tightening torque, min0.5 Nm

Min. AWG conductor cross section, flexible26

Max. AWG conductor cross section, flexible12

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 4.027141100

ETIM 3.0EC000901

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

End cover width2.2 mm

Connection methodScrew connection

Connection in acc. with standardCSA

Conductor cross section solid max.4 mm²

Conductor cross section AWG min.26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Ambient temperature (assembly)-5 °C ... 70 °C

ECLASS 10.0.127141120

ECLASS 6.027141100

ETIM 6.0EC000897

ETIM 7.0EC000897

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.4 mm²

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Internal cylindrical gageA3

China RoHSEnvironmentally Friendly Use...

ETIM 2.0EC000901

UNSPSC 13.239121410

UNSPSC 21.039121410

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, solid min.0.14 mm²

UNSPSC 6.0130211811

2 conductors with same cross section, stranded max.1.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ECLASS 9.027141120

UNSPSC 12.0139121410

ECLASS 7.027141120

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 7.090139121410

UNSPSC 19.039121410

UNSPSC 20.039121410

UNSPSC 18.039121410

Tractive force setpoint-

Conductor cross section tensile test-

Requirements, voltage drop-

Relative insulation material temperature index (Elec.; UL 746 B)-

Checking the mechanical stability of terminal points (5 x conductor connection)-

Note-

3044636
428 in stock
3044636
Phoenix Contact

Double-level terminal block, connection method: Screw connection, cross section: 0.14 mm² - 4 mm², A...

Colorgray

Flammability rating according to UL 94V0

Nominal voltage UN500 V

Rated surge voltage6 kV

Back of the hand protectionguaranteed

Potentials-

Degree of pollution3

Result of power-frequency withstand voltage testTest passed

Result of flexion and pull-out testTest passed

Number of connections4

Area of applicationRailway industry

Finger protectionguaranteed

Result of surge voltage testTest passed

Bending test turns135

Tight fit on carrierNS 35

Setpoint1 N

Short-time current0.48 kA

Bending test rotation speed10 rpm

ASD level1.857 (m/s2)2/Hz

Shock formHalf-sine

Shock test resultTest passed

ECLASS 5.127141100

Result of voltage-drop testTest passed

Overvoltage categoryIII

Power frequency withstand voltage setpoint1.89 kV

Result of temperature-rise testTest passed

Number of levels2

Insulating materialPA

Open side panelYes

Result of tight fit on supportTest passed

Proof of thermal characteristics (needle flame) effective duration30 s

Nominal cross section2.5 mm²

Nominal current IN24 A

Insulating material groupI

Maximum load current28 A (in case of a 4 mm² con...

Acceleration5g

Height NS 35/1572.5 mm

Conductor cross section AWG max.12

ECLASS 11.027141120

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Test duration per axis5 h

Short circuit stability resultTest passed

Oscillation, broadband noise test resultTest passed

Shock duration30 ms

Number of shocks per direction3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Width5.2 mm

Stripping length9 mm

Conductor cross section flexible min.0.14 mm²

Maximum power dissipation for nominal condition0.77 W (the value is multipl...

Tensile test resultTest passed

Result of thermal testTest passed

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Requirement temperature-rise test-

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)-

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,565 mm

Screw threadM3

Conductor cross section short circuit testing4 mm²

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height64.4 mm

Tightening torque max0.6 Nm

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²

2 conductors with same cross section, stranded min.0.14 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

Test directionsX-, Y- and Z-axis (pos. and ...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Length69.9 mm

Tightening torque, min0.5 Nm

Min. AWG conductor cross section, flexible-

Max. AWG conductor cross section, flexible-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 4.027141100

ETIM 3.0EC000901

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

End cover width2.2 mm

Connection methodScrew connection

Connection in acc. with standardCSA

Conductor cross section solid max.4 mm²

Conductor cross section AWG min.26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Ambient temperature (assembly)-5 °C ... 70 °C

ECLASS 10.0.127141120

ECLASS 6.027141100

ETIM 6.0EC000897

ETIM 7.0EC000897

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.4 mm²

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Internal cylindrical gageA3

China RoHSEnvironmentally Friendly Use...

ETIM 2.0EC000901

UNSPSC 13.239121410

UNSPSC 21.039121410

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, solid min.0.14 mm²

UNSPSC 6.0130211811

2 conductors with same cross section, stranded max.1.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ECLASS 9.027141120

UNSPSC 12.0139121410

ECLASS 7.027141120

ETIM 4.0EC001329

UNSPSC 1139121410

UNSPSC 7.090139121410

UNSPSC 19.039121410

UNSPSC 20.039121410

UNSPSC 18.039121410

Tractive force setpoint60 N

Conductor cross section tensile test4 mm²

Requirements, voltage drop≤ 3.2 mV

Relative insulation material temperature index (Elec.; UL 746 B)130 °C

Checking the mechanical stability of terminal points (5 x conductor connection)Test passed

Note-

3045088
6 in stock
3045088
Phoenix Contact

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 24 A, connection method: Screw c...

Colorblack

Flammability rating according to UL 94V0

Nominal voltage UN1000 V

Rated surge voltage8 kV

Back of the hand protectionguaranteed

Potentials1

Degree of pollution3

Result of power-frequency withstand voltage testTest passed

Result of flexion and pull-out testTest passed

Number of connections2

Area of applicationRailway industry

Finger protectionguaranteed

Result of surge voltage testTest passed

Bending test turns135

Tight fit on carrierNS 35

Setpoint1 N

Short-time current0.48 kA

Bending test rotation speed10 rpm

ASD level1.857 (m/s2)2/Hz

Shock formHalf-sine

Shock test resultTest passed

ECLASS 5.127141100

Result of voltage-drop testTest passed

Overvoltage categoryIII

Power frequency withstand voltage setpoint2.2 kV

Result of temperature-rise testTest passed

Number of levels1

Insulating materialPA

Open side panelYes

Result of tight fit on supportTest passed

Proof of thermal characteristics (needle flame) effective duration30 s

Nominal cross section2.5 mm²

Nominal current IN24 A

Insulating material groupI

Maximum load current32 A (with 4 mm² conductor c...

Acceleration5g

Height NS 35/1555 mm

Conductor cross section AWG max.12

ECLASS 11.027141120

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Test duration per axis5 h

Short circuit stability resultTest passed

Oscillation, broadband noise test resultTest passed

Shock duration30 ms

Number of shocks per direction3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Width5.2 mm

Stripping length9 mm

Conductor cross section flexible min.0.14 mm²

Maximum power dissipation for nominal condition0.77 W

Tensile test resultTest passed

Result of thermal testTest passed

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Screw threadM3

Conductor cross section short circuit testing4 mm²

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height-

Tightening torque max0.6 Nm

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²

2 conductors with same cross section, stranded min.0.14 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

Test directionsX-, Y- and Z-axis (pos. and ...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Length47.7 mm

Tightening torque, min0.5 Nm

Min. AWG conductor cross section, flexible26

Max. AWG conductor cross section, flexible12

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 4.027141100

ETIM 3.0EC000897

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

End cover width2.2 mm

Connection methodScrew connection

Connection in acc. with standardCSA

Conductor cross section solid max.4 mm²

Conductor cross section AWG min.26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Ambient temperature (assembly)-5 °C ... 70 °C

ECLASS 10.0.127141120

ECLASS 6.027141100

ETIM 6.0EC000897

ETIM 7.0EC000897

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.2.5 mm²

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Internal cylindrical gageA3

China RoHSEnvironmentally Friendly Use...

ETIM 2.0EC000897

UNSPSC 13.239121410

UNSPSC 21.039121410

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, solid min.0.14 mm²

UNSPSC 6.0130211811

2 conductors with same cross section, stranded max.1.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ECLASS 9.027141120

UNSPSC 12.0139121410

ECLASS 7.027141120

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 7.090139121410

UNSPSC 19.039121410

UNSPSC 20.039121410

UNSPSC 18.039121410

Tractive force setpoint-

Conductor cross section tensile test-

Requirements, voltage drop-

Relative insulation material temperature index (Elec.; UL 746 B)-

Checking the mechanical stability of terminal points (5 x conductor connection)-

NoteNote: Product releases, conn...

About the manufacturer

Phoenix Contact

Powermatic Associates is an authorized Phoenix Contact distributor, proudly offering a wide array of innovative industrial solutions that cater to modern technological demands. Phoenix Contact is a global leader renowned for its high-quality products in the fields of electrical engineering and automation technology. Their extensive catalog encompasses everything from connection technology, interface systems, and surge protection to automation software and control technology, making them a versatile choice for various industrial applications. At Powermatic Associates, we deliver Phoenix Contact’s pioneering connectivity and power management solutions, which include terminal blocks, connectors, relays, and PLCs. These components are essential for creating efficient and reliable electrical connections in diverse environments, ensuring seamless system integration. The company's comprehensive range of Industrial Internet of Things (IIoT) solutions facilitates intelligent networking, enabling customers to optimize their automation processes with cutting-edge technology. Phoenix Contact's emphasis on sustainability and innovation reflects in their energy management systems and renewable energy solutions. By incorporating these into your operations, you not only enhance efficiency but also contribute to sustainable practices, aligning with modern environmental standards. Powermatic Associates recognizes the significance of such advancements and partners with Phoenix Contact to provide expert engineering support and tailored solutions, helping you implement smart technologies that drive productivity and minimize costs. With a focus on safety and reliability, Phoenix Contact offers advanced surge protection devices and signal conditioners that safeguard your equipment against voltage spikes and ensure data integrity. In collaboration with Powermatic Associates, customers gain access to robust technical support and consultation, ensuring that every project benefits from personalized guidance and quick resolution of technical challenges. Our partnership extends the reach of Phoenix Contact’s globally recognized industrial automation products, including Human Machine Interfaces (HMIs) and Ethernet switches, empowering businesses with enhanced operational control and communication capabilities. Customers can trust Powermatic Associates to deliver prompt shipping and thorough assistance, ensuring that Phoenix Contact’s top-tier products are seamlessly integrated into their workflows for optimal performance.

Recently viewed products

Relevant products

FAQ

32 in stock

Feed-through terminal block, nom. voltage: 500 V, nominal current: 24 A, connection method: Screw connection, number of connections: 4, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 46.9 mm, color: gray, mounting type: NS 35/7,5, N

Similar products from: Terminal Blocks

What can I help you find today?

Recommended parts