0790433 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Overvoltage category
  III
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Tight fit on carrier
  NS 32/NS 35
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Requirements, voltage drop
  ≤ 3.2 mV
• Result of temperature-rise test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Width
  11 mm
• Height NS 32
  57 mm
• AWG min
  20
• Screw thread
  M4
• Stripping length
  The stripping length depends on the specification provided by the cable lug manufacturer.
• REACh SVHC
  Lead 7439-92-1
• ECLASS 11.0
  27141120
ECLASS 9.0
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Color
gray
Degree of pollution
3
Nominal current IN
41 A
Finger protection
guaranteed
Surge voltage test setpoint
9.8 kV
Number of levels
1
Flammability rating according to UL 94
V0
Connection in acc. with standard
CSA
Open side panel
Yes
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
2 h
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
59.5 mm
Cable lug connection according to standard
DIN 46237:1970-07
Max. cross section for cable lug connection
2.5 mm²
Bolt diameter
4 mm
Tightening torque, min
1.5 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
Insulating material
PA
Insulating material group
I
Nominal cross section
6 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
800 V (the nominal voltage applies to insulated cable lugs)
Result of tight fit on support
Test passed
Setpoint
5 N
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
52 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Min. cross section for cable lug connection
0.5 mm²
AWG max
14
Cable lug width, max.
9.6 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
2 kV
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Test frequency
5 - 150 Hz
Shock test result
Test passed
Shock duration
50 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
43.5 mm
Connection method
Bolt connection
Hole diameter, min.
4.3 mm
Tightening torque max
1.8 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410