0441504 Phoenix Contact Terminal Blocks

Height NS 35/7,579 mm

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.25 mm²

Rated surge voltage6 kV

Open side panelNo

Insulating material groupI

China RoHSEnvironmentally Friendly Use...

Number of levels2

ECLASS 9.027141116

ECLASS 10.0.127141116

Connection methodScrew connection

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Number of connections4

Flammability rating according to UL 94V0

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

ECLASS 6.027141100

ETIM 3.0EC000899

UNSPSC 6.0130211811

Static insulating material application in cold-60 °C

Ambient temperature (assembly)-5 °C ... 70 °C

ETIM 7.0EC000899

Maximum power dissipation for nominal condition1.02 W (the value is multipl...

ECLASS 11.027141116

ECLASS 7.027141116

UNSPSC 19.039121410

UNSPSC 18.039121410

Terminal block mounting-

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Colorblack

Overvoltage categoryIII

Surface flammability NFPA 130 (ASTM E 162)passed

Insulating materialPA

Degree of pollution3

Relative insulation material temperature index (Elec., UL 746 B)130 °C

NoteIn the closed condition.

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Height NS 35/1586.5 mm

Conductor cross section solid min.0.2 mm²

Conductor cross section flexible min.0.2 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 5.027141100

ECLASS 5.127141100

ETIM 6.0EC000899

Tightening torque, min0.5 Nm

Conductor cross section flexible max.4 mm²

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Length86.5 mm

Tightening torque max0.8 Nm

2 conductors with same cross section, solid min.0.2 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Conductor cross section AWG min.24

Conductor cross section flexible, with ferrule with plastic sleeve min.0.25 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Min. AWG conductor cross section, flexible-

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Screw threadM3

Conductor cross section flexible, with ferrule without plastic sleeve min.0.25 mm²

2 conductors with same cross section, stranded min.0.2 mm²

Conductor cross section solid max.4 mm²

Connection in acc. with standardCSA

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1.5 mm²

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 4.027141100

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height NS 3284 mm

Max. AWG conductor cross section, flexible-

Conductor cross section flexible, with ferrule with plastic sleeve max.4 mm²

UNSPSC 21.039121410

Stripping length8 mm

2 conductors with same cross section, solid max.1.5 mm²

Width8.2 mm

Conductor cross section AWG max.12

Nominal cross section4 mm²

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

ETIM 2.0EC000897

UNSPSC 7.090139121410

UNSPSC 13.239121410

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

ETIM 4.0EC000899

UNSPSC 1139121410

UNSPSC 12.0139121410

UNSPSC 20.039121410

Internal cylindrical gageA4

Maximum load current32 A (Lower level)

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability result-

Result of surge voltage testTest passed

Tensile test result-

Tight fit on carrier-

Conductor cross section short circuit testing-

Nominal voltage UN400 V

Power frequency withstand voltage setpoint-

Bending test turns135

Short-time current-

Proof of thermal characteristics (needle flame) effective duration-

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint-

Result of temperature-rise testTest passed

Result of voltage-drop test-

Area of application-

End cover width-

Back of the hand protectionguaranteed

Potentials-

Acceleration-

Bending test conductor cross section/weight0.2 mm² / 0.2 kg

Test specification, oscillation, broadband noise-

Shock form-

Number of shocks per direction-

Result of power-frequency withstand voltage testTest passed

Test directions-

Test specification, shock test-

Oscillation, broadband noise test result-

Test spectrum-

Bending test rotation speed-

Shock test result-

Shock duration-

Requirement temperature-rise test-

Result of thermal testTest passed

Test frequency-

Height-

Nominal current IN32 A

Test duration per axis-

ASD level-

FuseG / 6,3 x 32

Cross section with insertion bridge, stranded max.2.5 mm²

Maximum load current (upper level)10 A

Fuse typeGlass / ceramics / ...

Actuatiing forces on plug in or lever in fuse insert carriersTest passed

Maximum power dissipationmax. 2.5 W (with single arra...

Compatibitity between modular fuse terminal block and fuse insertTest passed

Nominal current IN (upper level)10 A

Testing the rated value of the power dissipation (exclusively short circuit protection)Test passed

Cross section with insertion bridge, solid max.4 mm²

Contact resistanceTest passed

Testing the rated value of the power dissipation (overload and short circuit Protection)Test passed

Height NS 35/7,547 mm

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.25 mm²

Rated surge voltage8 kV

Open side panelNo

Insulating material groupI

China RoHSEnvironmentally Friendly Use...

Number of levels1

ECLASS 9.027141141

ECLASS 10.0.127141141

Connection methodScrew connection

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Number of connections2

Flammability rating according to UL 94V0

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

ECLASS 6.027141100

ETIM 3.0EC000901

UNSPSC 6.0130211811

Static insulating material application in cold-60 °C

Ambient temperature (assembly)-5 °C ... 70 °C

ETIM 7.0EC000901

Maximum power dissipation for nominal condition1.02 W

ECLASS 11.027141141

ECLASS 7.027141141

UNSPSC 19.039121410

UNSPSC 18.039121410

Terminal block mounting0.6 Nm ... 0.8 Nm (PE foot w...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Colorgreen-yellow

Overvoltage categoryIII

Surface flammability NFPA 130 (ASTM E 162)passed

Insulating materialPA

Degree of pollution3

Relative insulation material temperature index (Elec., UL 746 B)130 °C

NotePlease observe the current c...

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Height NS 35/1554.5 mm

Conductor cross section solid min.0.2 mm²

Conductor cross section flexible min.0.2 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 5.027141100

ECLASS 5.127141100

ETIM 6.0EC000901

Tightening torque, min0.6 Nm

Conductor cross section flexible max.4 mm²

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Length42.5 mm

Tightening torque max0.8 Nm

2 conductors with same cross section, solid min.0.2 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Conductor cross section AWG min.24

Conductor cross section flexible, with ferrule with plastic sleeve min.0.25 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Min. AWG conductor cross section, flexible24

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Screw threadM3

Conductor cross section flexible, with ferrule without plastic sleeve min.0.25 mm²

2 conductors with same cross section, stranded min.0.2 mm²

Conductor cross section solid max.4 mm²

Connection in acc. with standardCSA

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum2.5 mm²

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 4.027141100

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height NS 3252 mm

Max. AWG conductor cross section, flexible12

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

UNSPSC 21.039121410

Stripping length8 mm

2 conductors with same cross section, solid max.1.5 mm²

Width6.2 mm

Conductor cross section AWG max.12

Nominal cross section4 mm²

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

ETIM 2.0EC000901

UNSPSC 7.090139121410

UNSPSC 13.239121410

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

ETIM 4.0EC000901

UNSPSC 1139121410

UNSPSC 12.0139121410

UNSPSC 20.039121410

Internal cylindrical gage-

Maximum load current-

Finger protection-

Result of tight fit on support-

Short circuit stability result-

Result of surge voltage test-

Tensile test result-

Tight fit on carrier-

Conductor cross section short circuit testing-

Nominal voltage UN-

Power frequency withstand voltage setpoint-

Bending test turns-

Short-time current-

Proof of thermal characteristics (needle flame) effective duration-

Shock protection test specification-

Result of flexion and pull-out test-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Setpoint-

Result of temperature-rise test-

Result of voltage-drop test-

Area of application-

End cover width-

Back of the hand protection-

Potentials-

Acceleration-

Bending test conductor cross section/weight-

Test specification, oscillation, broadband noise-

Shock form-

Number of shocks per direction-

Result of power-frequency withstand voltage test-

Test directions-

Test specification, shock test-

Oscillation, broadband noise test result-

Test spectrum-

Bending test rotation speed-

Shock test result-

Shock duration-

Requirement temperature-rise test-

Result of thermal test-

Test frequency-

Height-

Nominal current IN-

Test duration per axis-

ASD level-

Fuse-

Cross section with insertion bridge, stranded max.-

Maximum load current (upper level)-

Fuse type-

Actuatiing forces on plug in or lever in fuse insert carriers-

Maximum power dissipation-

Compatibitity between modular fuse terminal block and fuse insert-

Nominal current IN (upper level)-

Testing the rated value of the power dissipation (exclusively short circuit protection)-

Cross section with insertion bridge, solid max.-

Contact resistance-

Testing the rated value of the power dissipation (overload and short circuit Protection)-

Height NS 35/7,547.5 mm

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Rated surge voltage8 kV

Open side panelYes

Insulating material groupI

China RoHSEnvironmentally Friendly Use...

Number of levels1

ECLASS 9.027141120

ECLASS 10.0.127141120

Connection methodScrew connection

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Number of connections2

Flammability rating according to UL 94V0

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

ECLASS 6.027141100

ETIM 3.0EC000897

UNSPSC 6.0130211811

Static insulating material application in cold-60 °C

Ambient temperature (assembly)-5 °C ... 70 °C

ETIM 7.0EC000897

Maximum power dissipation for nominal condition1.02 W

ECLASS 11.027141120

ECLASS 7.027141120

UNSPSC 19.039121410

UNSPSC 18.039121410

Terminal block mounting-

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Colorgray

Overvoltage categoryIII

Surface flammability NFPA 130 (ASTM E 162)passed

Insulating materialPA

Degree of pollution3

Relative insulation material temperature index (Elec., UL 746 B)130 °C

NoteNote: Product releases, conn...

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Height NS 35/1555 mm

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible min.0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 5.027141100

ECLASS 5.127141100

ETIM 6.0EC000897

Tightening torque, min0.6 Nm

Conductor cross section flexible max.6 mm²

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Length47.7 mm

Tightening torque max0.8 Nm

2 conductors with same cross section, solid min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Conductor cross section AWG min.26

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Min. AWG conductor cross section, flexible26

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Screw threadM3

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

2 conductors with same cross section, stranded min.0.14 mm²

Conductor cross section solid max.6 mm²

Connection in acc. with standardCSA

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum2.5 mm²

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 4.027141100

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height NS 32-

Max. AWG conductor cross section, flexible10

Conductor cross section flexible, with ferrule with plastic sleeve max.4 mm²

UNSPSC 21.039121410

Stripping length9 mm

2 conductors with same cross section, solid max.1.5 mm²

Width6.2 mm

Conductor cross section AWG max.10

Nominal cross section4 mm²

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

ETIM 2.0EC000897

UNSPSC 7.090139121410

UNSPSC 13.239121410

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 12.0139121410

UNSPSC 20.039121410

Internal cylindrical gageA4

Maximum load current41 A (with 6 mm² conductor c...

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability resultTest passed

Result of surge voltage testTest passed

Tensile test resultTest passed

Tight fit on carrierNS 35

Conductor cross section short circuit testing6 mm²

Nominal voltage UN1000 V

Power frequency withstand voltage setpoint2.2 kV

Bending test turns135

Short-time current0.72 kA

Proof of thermal characteristics (needle flame) effective duration30 s

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Result of temperature-rise testTest passed

Result of voltage-drop testTest passed

Area of applicationRailway industry

End cover width2.2 mm

Back of the hand protectionguaranteed

Potentials1

Acceleration5g

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Shock formHalf-sine

Number of shocks per direction3

Result of power-frequency withstand voltage testTest passed

Test directionsX-, Y- and Z-axis (pos. and ...

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Oscillation, broadband noise test resultTest passed

Test spectrumService life test category 1...

Bending test rotation speed10 rpm

Shock test resultTest passed

Shock duration30 ms

Requirement temperature-rise testIncrease in temperature ≤ 45...

Result of thermal testTest passed

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Height46.9 mm

Nominal current IN32 A (with 4 mm² conductor c...

Test duration per axis5 h

ASD level1.857 (m/s2)2/Hz

Fuse-

Cross section with insertion bridge, stranded max.-

Maximum load current (upper level)-

Fuse type-

Actuatiing forces on plug in or lever in fuse insert carriers-

Maximum power dissipation-

Compatibitity between modular fuse terminal block and fuse insert-

Nominal current IN (upper level)-

Testing the rated value of the power dissipation (exclusively short circuit protection)-

Cross section with insertion bridge, solid max.-

Contact resistance-

Testing the rated value of the power dissipation (overload and short circuit Protection)-

Height NS 35/7,579 mm

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.25 mm²

Rated surge voltage6 kV

Open side panelNo

Insulating material groupI

China RoHSEnvironmentally Friendly Use...

Number of levels2

ECLASS 9.027141116

ECLASS 10.0.127141116

Connection methodScrew connection

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Number of connections4

Flammability rating according to UL 94V0

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

ECLASS 6.027141100

ETIM 3.0EC000899

UNSPSC 6.0130211811

Static insulating material application in cold-60 °C

Ambient temperature (assembly)-5 °C ... 70 °C

ETIM 7.0EC000899

Maximum power dissipation for nominal condition1.02 W (the value is multipl...

ECLASS 11.027141116

ECLASS 7.027141116

UNSPSC 19.039121410

UNSPSC 18.039121410

Terminal block mounting-

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Colorblack

Overvoltage categoryIII

Surface flammability NFPA 130 (ASTM E 162)passed

Insulating materialPA

Degree of pollution3

Relative insulation material temperature index (Elec., UL 746 B)130 °C

NoteIn the closed condition.

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Height NS 35/1586.5 mm

Conductor cross section solid min.0.2 mm²

Conductor cross section flexible min.0.2 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 5.027141100

ECLASS 5.127141100

ETIM 6.0EC000899

Tightening torque, min0.5 Nm

Conductor cross section flexible max.4 mm²

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Length86.5 mm

Tightening torque max0.8 Nm

2 conductors with same cross section, solid min.0.2 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Conductor cross section AWG min.24

Conductor cross section flexible, with ferrule with plastic sleeve min.0.25 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Min. AWG conductor cross section, flexible-

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Screw threadM3

Conductor cross section flexible, with ferrule without plastic sleeve min.0.25 mm²

2 conductors with same cross section, stranded min.0.2 mm²

Conductor cross section solid max.4 mm²

Connection in acc. with standardCSA

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1.5 mm²

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 4.027141100

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height NS 3284 mm

Max. AWG conductor cross section, flexible-

Conductor cross section flexible, with ferrule with plastic sleeve max.4 mm²

UNSPSC 21.039121410

Stripping length8 mm

2 conductors with same cross section, solid max.1.5 mm²

Width8.2 mm

Conductor cross section AWG max.12

Nominal cross section4 mm²

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

ETIM 2.0EC000897

UNSPSC 7.090139121410

UNSPSC 13.239121410

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

ETIM 4.0EC000899

UNSPSC 1139121410

UNSPSC 12.0139121410

UNSPSC 20.039121410

Internal cylindrical gageA4

Maximum load current32 A (Lower level)

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability result-

Result of surge voltage testTest passed

Tensile test result-

Tight fit on carrier-

Conductor cross section short circuit testing-

Nominal voltage UN400 V

Power frequency withstand voltage setpoint-

Bending test turns135

Short-time current-

Proof of thermal characteristics (needle flame) effective duration-

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint-

Result of temperature-rise testTest passed

Result of voltage-drop test-

Area of application-

End cover width-

Back of the hand protectionguaranteed

Potentials-

Acceleration-

Bending test conductor cross section/weight0.2 mm² / 0.2 kg

Test specification, oscillation, broadband noise-

Shock form-

Number of shocks per direction-

Result of power-frequency withstand voltage testTest passed

Test directions-

Test specification, shock test-

Oscillation, broadband noise test result-

Test spectrum-

Bending test rotation speed-

Shock test result-

Shock duration-

Requirement temperature-rise test-

Result of thermal testTest passed

Test frequency-

Height-

Nominal current IN32 A

Test duration per axis-

ASD level-

FuseG / 6,3 x 32

Cross section with insertion bridge, stranded max.2.5 mm²

Maximum load current (upper level)10 A

Fuse typeGlass / ceramics / ...

Actuatiing forces on plug in or lever in fuse insert carriersTest passed

Maximum power dissipationmax. 2.5 W (with single arra...

Compatibitity between modular fuse terminal block and fuse insertTest passed

Nominal current IN (upper level)10 A

Testing the rated value of the power dissipation (exclusively short circuit protection)Test passed

Cross section with insertion bridge, solid max.4 mm²

Contact resistanceTest passed

Testing the rated value of the power dissipation (overload and short circuit Protection)Test passed

Height NS 35/7,547 mm

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.25 mm²

Rated surge voltage8 kV

Open side panelNo

Insulating material groupI

China RoHSEnvironmentally Friendly Use...

Number of levels1

ECLASS 9.027141141

ECLASS 10.0.127141141

Connection methodScrew connection

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Number of connections2

Flammability rating according to UL 94V0

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

ECLASS 6.027141100

ETIM 3.0EC000901

UNSPSC 6.0130211811

Static insulating material application in cold-60 °C

Ambient temperature (assembly)-5 °C ... 70 °C

ETIM 7.0EC000901

Maximum power dissipation for nominal condition1.02 W

ECLASS 11.027141141

ECLASS 7.027141141

UNSPSC 19.039121410

UNSPSC 18.039121410

Terminal block mounting0.6 Nm ... 0.8 Nm (PE foot w...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Colorgreen-yellow

Overvoltage categoryIII

Surface flammability NFPA 130 (ASTM E 162)passed

Insulating materialPA

Degree of pollution3

Relative insulation material temperature index (Elec., UL 746 B)130 °C

NotePlease observe the current c...

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Height NS 35/1554.5 mm

Conductor cross section solid min.0.2 mm²

Conductor cross section flexible min.0.2 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 5.027141100

ECLASS 5.127141100

ETIM 6.0EC000901

Tightening torque, min0.6 Nm

Conductor cross section flexible max.4 mm²

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Length42.5 mm

Tightening torque max0.8 Nm

2 conductors with same cross section, solid min.0.2 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Conductor cross section AWG min.24

Conductor cross section flexible, with ferrule with plastic sleeve min.0.25 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Min. AWG conductor cross section, flexible24

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Screw threadM3

Conductor cross section flexible, with ferrule without plastic sleeve min.0.25 mm²

2 conductors with same cross section, stranded min.0.2 mm²

Conductor cross section solid max.4 mm²

Connection in acc. with standardCSA

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum2.5 mm²

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 4.027141100

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height NS 3252 mm

Max. AWG conductor cross section, flexible12

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

UNSPSC 21.039121410

Stripping length8 mm

2 conductors with same cross section, solid max.1.5 mm²

Width6.2 mm

Conductor cross section AWG max.12

Nominal cross section4 mm²

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Ambient temperature (actuation)-5 °C ... 70 °C

ECLASS 4.127141100

ETIM 2.0EC000901

UNSPSC 7.090139121410

UNSPSC 13.239121410

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

ETIM 4.0EC000901

UNSPSC 1139121410

UNSPSC 12.0139121410

UNSPSC 20.039121410

Internal cylindrical gage-

Maximum load current-

Finger protection-

Result of tight fit on support-

Short circuit stability result-

Result of surge voltage test-

Tensile test result-

Tight fit on carrier-

Conductor cross section short circuit testing-

Nominal voltage UN-

Power frequency withstand voltage setpoint-

Bending test turns-

Short-time current-

Proof of thermal characteristics (needle flame) effective duration-

Shock protection test specification-

Result of flexion and pull-out test-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Setpoint-

Result of temperature-rise test-

Result of voltage-drop test-

Area of application-

End cover width-

Back of the hand protection-

Potentials-

Acceleration-

Bending test conductor cross section/weight-

Test specification, oscillation, broadband noise-

Shock form-

Number of shocks per direction-

Result of power-frequency withstand voltage test-

Test directions-

Test specification, shock test-

Oscillation, broadband noise test result-

Test spectrum-

Bending test rotation speed-

Shock test result-

Shock duration-

Requirement temperature-rise test-

Result of thermal test-

Test frequency-

Height-

Nominal current IN-

Test duration per axis-

ASD level-

Fuse-

Cross section with insertion bridge, stranded max.-

Maximum load current (upper level)-

Fuse type-

Actuatiing forces on plug in or lever in fuse insert carriers-

Maximum power dissipation-

Compatibitity between modular fuse terminal block and fuse insert-

Nominal current IN (upper level)-

Testing the rated value of the power dissipation (exclusively short circuit protection)-

Cross section with insertion bridge, solid max.-

Contact resistance-

Testing the rated value of the power dissipation (overload and short circuit Protection)-