3049411 Phoenix Contact Terminal Blocks

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Number of levels1

Insulating materialPA

Acceleration5g

Overvoltage categoryIII

Number of connections2

Degree of pollution3

Test duration per axis5 h

End cover width2.2 mm

Connection methodBolt connection

AWG min26

Connection1 level

Stripping lengthThe stripping length depends...

AWG max10

ECLASS 5.127141100

Maximum load current32 A

Cable lug connection according to standardDIN 46237:1970-07

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ETIM 4.0EC000897

UNSPSC 12.0139121410

ECLASS 7.027141120

UNSPSC 13.239121410

UNSPSC 6.0130211811

UNSPSC 1139121410

Nominal voltage UN800 V

Nominal cross section4 mm²

Area of application-

ASD level1.857 (m/s2)2/Hz

Shock duration30 ms

Static insulating material application in cold-60 °C

Cable lug width, max.8 mm

Nominal current IN32 A

Bolt diameter4 mm

Tightening torque, min1.2 Nm

Ambient temperature (actuation)-5 °C ... 70 °C

Note-

Colorgray

Insulating material groupI

Test spectrumService life test category 1...

Oscillation, broadband noise test resultTest passed

Number of shocks per direction3

Shock test resultTest passed

Length53.3 mm

Max. cross section for cable lug connection2.5 mm²

Screw threadM4

ECLASS 4.027141100

Test directionsX-, Y- and Z-axis (pos. and ...

Shock formHalf-sine

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/7,547.1 mm

Min. cross section for cable lug connection0.5 mm²

UNSPSC 19.039121410

UNSPSC 21.039121410

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Flammability rating according to UL 94V0

Open side panelYes

Potentials1

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Width9 mm

Height NS 35/1554.6 mm

Connection in acc. with standardCUL

Ambient temperature (assembly)-5 °C ... 70 °C

China RoHSEnvironmentally friendly use...

Rated surge voltage8 kV

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 6.027141100

ECLASS 11.027141120

ETIM 2.0EC000897

ETIM 6.0EC000897

ECLASS 9.027141120

UNSPSC 18.039121410

Hole diameter, min.4.3 mm

Tightening torque max1.4 Nm

REACh SVHC-

ECLASS 10.0.127141120

ECLASS 4.127141100

ETIM 3.0EC000897

ETIM 7.0EC000897

UNSPSC 7.090139121410

UNSPSC 20.039121410

Operating temperature-60 °C ... 105 °C (max. shor...

Back of the hand protection-

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Maximum power dissipation for nominal condition1.02 W

Shock protection test specification-

Note regarding shock protection-

Result of voltage-drop testTest passed

Tight fit on carrierNS 35/NS 32

Short-time current0.48 kA

Finger protection-

Power frequency withstand voltage setpoint2 kV

Short circuit stability resultTest passed

Result of thermal testTest passed

Result of surge voltage testTest passed

Result of tight fit on supportTest passed

Conductor cross section short circuit testing4 mm²

Proof of thermal characteristics (needle flame) effective duration30 s

Result of power-frequency withstand voltage testTest passed

Result of temperature-rise testTest passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Height NS 3252.1 mm

Pitch9 mm

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Number of levels1

Insulating materialPA

Acceleration5g

Overvoltage categoryIII

Number of connections2

Degree of pollution3

Test duration per axis5 h

End cover width2.2 mm

Connection methodBolt connection

AWG min18

Connection1 level

Stripping lengthThe stripping length depends...

AWG max14

ECLASS 5.127141100

Maximum load current24 A (with a 2.5 mm² conduct...

Cable lug connection according to standardDIN 46237:1970-07

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ETIM 4.0EC000901

UNSPSC 12.0139121410

ECLASS 7.027141141

UNSPSC 13.239121410

UNSPSC 6.0130211811

UNSPSC 1139121410

Nominal voltage UN1000 V

Nominal cross section2.5 mm²

Area of applicationRailway industry

ASD level0.02 g²/Hz

Shock duration30 ms

Static insulating material application in cold-60 °C

Cable lug width, max.6 mm

Nominal current IN24 A

Bolt diameter3 mm

Tightening torque, min0.6 Nm

Ambient temperature (actuation)-5 °C ... 70 °C

NoteNote: the BE-RT... path exte...

Colorgreen-yellow

Insulating material groupI

Test spectrumService life test category 1...

Oscillation, broadband noise test resultTest passed

Number of shocks per direction3

Shock test resultTest passed

Length66 mm

Max. cross section for cable lug connection2.5 mm²

Screw threadM3

ECLASS 4.027141100

Test directionsX-, Y- and Z-axis (pos. and ...

Shock formHalf-sine

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/7,551 mm

Min. cross section for cable lug connection1 mm²

UNSPSC 19.039121410

UNSPSC 21.039121410

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Flammability rating according to UL 94V0

Open side panelYes

Potentials1

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Width12.3 mm

Height NS 35/1558.5 mm

Connection in acc. with standardCUL

Ambient temperature (assembly)-5 °C ... 70 °C

China RoHSEnvironmentally friendly use...

Rated surge voltage8 kV

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 6.027141100

ECLASS 11.027141120

ETIM 2.0EC000897

ETIM 6.0EC000897

ECLASS 9.027141120

UNSPSC 18.039121410

Hole diameter, min.3.2 mm

Tightening torque max0.8 Nm

REACh SVHCLead 7439-92-1

ECLASS 10.0.127141120

ECLASS 4.127141100

ETIM 3.0EC000897

ETIM 7.0EC000897

UNSPSC 7.090139121410

UNSPSC 20.039121410

Operating temperature-60 °C ... 105 °C (max. shor...

Back of the hand protection-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Setpoint-

Maximum power dissipation for nominal condition-

Shock protection test specification-

Note regarding shock protection-

Result of voltage-drop test-

Tight fit on carrier-

Short-time current-

Finger protection-

Power frequency withstand voltage setpoint-

Short circuit stability result-

Result of thermal test-

Result of surge voltage test-

Result of tight fit on support-

Conductor cross section short circuit testing-

Proof of thermal characteristics (needle flame) effective duration-

Result of power-frequency withstand voltage test-

Result of temperature-rise test-

Requirement temperature-rise test-

Height NS 32-

Pitch-

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Number of levels1

Insulating materialPA

Acceleration5g

Overvoltage categoryIII

Number of connections2

Degree of pollution3

Test duration per axis5 h

End cover width2.2 mm

Connection methodBolt connection

AWG min18

Connection1 level

Stripping lengthThe stripping length depends...

AWG max14

ECLASS 5.127141100

Maximum load current24 A (with a 2.5 mm² conduct...

Cable lug connection according to standardDIN 46237:1970-07

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ETIM 4.0EC000897

UNSPSC 12.0139121410

ECLASS 7.027141120

UNSPSC 13.239121410

UNSPSC 6.0130211811

UNSPSC 1139121410

Nominal voltage UN1000 V (Rated voltage for op...

Nominal cross section2.5 mm²

Area of applicationRailway industry

ASD level1.857 (m/s2)2/Hz

Shock duration30 ms

Static insulating material application in cold-60 °C

Cable lug width, max.6 mm

Nominal current IN24 A

Bolt diameter3 mm

Tightening torque, min0.6 Nm

Ambient temperature (actuation)-5 °C ... 70 °C

NoteNote: the BE-RT... path exte...

Colorgray

Insulating material groupI

Test spectrumService life test category 1...

Oscillation, broadband noise test resultTest passed

Number of shocks per direction3

Shock test resultTest passed

Length66 mm

Max. cross section for cable lug connection2.5 mm²

Screw threadM3

ECLASS 4.027141100

Test directionsX-, Y- and Z-axis (pos. and ...

Shock formHalf-sine

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/7,551 mm

Min. cross section for cable lug connection1 mm²

UNSPSC 19.039121410

UNSPSC 21.039121410

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Flammability rating according to UL 94V0

Open side panelYes

Potentials1

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Width12.3 mm

Height NS 35/1558.5 mm

Connection in acc. with standardCUL

Ambient temperature (assembly)-5 °C ... 70 °C

China RoHSEnvironmentally friendly use...

Rated surge voltage8 kV

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 6.027141100

ECLASS 11.027141120

ETIM 2.0EC000897

ETIM 6.0EC000897

ECLASS 9.027141120

UNSPSC 18.039121410

Hole diameter, min.3.2 mm

Tightening torque max0.8 Nm

REACh SVHCLead 7439-92-1

ECLASS 10.0.127141120

ECLASS 4.127141100

ETIM 3.0EC000897

ETIM 7.0EC000897

UNSPSC 7.090139121410

UNSPSC 20.039121410

Operating temperature-60 °C ... 105 °C (max. shor...

Back of the hand protectionguaranteed

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Maximum power dissipation for nominal condition0.77 W

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Note regarding shock protectionElectric shock protection on...

Result of voltage-drop testTest passed

Tight fit on carrierNS 35

Short-time current0.3 kA

Finger protectionguaranteed

Power frequency withstand voltage setpoint2.2 kV

Short circuit stability resultTest passed

Result of thermal testTest passed

Result of surge voltage testTest passed

Result of tight fit on supportTest passed

Conductor cross section short circuit testing2.5 mm²

Proof of thermal characteristics (needle flame) effective duration30 s

Result of power-frequency withstand voltage testTest passed

Result of temperature-rise testTest passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Height NS 32-

Pitch-

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Number of levels1

Insulating materialPA

Acceleration5g

Overvoltage categoryIII

Number of connections2

Degree of pollution3

Test duration per axis5 h

End cover width2.2 mm

Connection methodBolt connection

AWG min26

Connection1 level

Stripping lengthThe stripping length depends...

AWG max10

ECLASS 5.127141100

Maximum load current32 A

Cable lug connection according to standardDIN 46237:1970-07

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ETIM 4.0EC000897

UNSPSC 12.0139121410

ECLASS 7.027141120

UNSPSC 13.239121410

UNSPSC 6.0130211811

UNSPSC 1139121410

Nominal voltage UN800 V

Nominal cross section4 mm²

Area of application-

ASD level1.857 (m/s2)2/Hz

Shock duration30 ms

Static insulating material application in cold-60 °C

Cable lug width, max.8 mm

Nominal current IN32 A

Bolt diameter4 mm

Tightening torque, min1.2 Nm

Ambient temperature (actuation)-5 °C ... 70 °C

Note-

Colorgray

Insulating material groupI

Test spectrumService life test category 1...

Oscillation, broadband noise test resultTest passed

Number of shocks per direction3

Shock test resultTest passed

Length53.3 mm

Max. cross section for cable lug connection2.5 mm²

Screw threadM4

ECLASS 4.027141100

Test directionsX-, Y- and Z-axis (pos. and ...

Shock formHalf-sine

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/7,547.1 mm

Min. cross section for cable lug connection0.5 mm²

UNSPSC 19.039121410

UNSPSC 21.039121410

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Flammability rating according to UL 94V0

Open side panelYes

Potentials1

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Width9 mm

Height NS 35/1554.6 mm

Connection in acc. with standardCUL

Ambient temperature (assembly)-5 °C ... 70 °C

China RoHSEnvironmentally friendly use...

Rated surge voltage8 kV

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 6.027141100

ECLASS 11.027141120

ETIM 2.0EC000897

ETIM 6.0EC000897

ECLASS 9.027141120

UNSPSC 18.039121410

Hole diameter, min.4.3 mm

Tightening torque max1.4 Nm

REACh SVHC-

ECLASS 10.0.127141120

ECLASS 4.127141100

ETIM 3.0EC000897

ETIM 7.0EC000897

UNSPSC 7.090139121410

UNSPSC 20.039121410

Operating temperature-60 °C ... 105 °C (max. shor...

Back of the hand protection-

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Maximum power dissipation for nominal condition1.02 W

Shock protection test specification-

Note regarding shock protection-

Result of voltage-drop testTest passed

Tight fit on carrierNS 35/NS 32

Short-time current0.48 kA

Finger protection-

Power frequency withstand voltage setpoint2 kV

Short circuit stability resultTest passed

Result of thermal testTest passed

Result of surge voltage testTest passed

Result of tight fit on supportTest passed

Conductor cross section short circuit testing4 mm²

Proof of thermal characteristics (needle flame) effective duration30 s

Result of power-frequency withstand voltage testTest passed

Result of temperature-rise testTest passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Height NS 3252.1 mm

Pitch9 mm

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Number of levels1

Insulating materialPA

Acceleration5g

Overvoltage categoryIII

Number of connections2

Degree of pollution3

Test duration per axis5 h

End cover width2.2 mm

Connection methodBolt connection

AWG min18

Connection1 level

Stripping lengthThe stripping length depends...

AWG max14

ECLASS 5.127141100

Maximum load current24 A (with a 2.5 mm² conduct...

Cable lug connection according to standardDIN 46237:1970-07

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

ECLASS 5.027141100

ETIM 4.0EC000901

UNSPSC 12.0139121410

ECLASS 7.027141141

UNSPSC 13.239121410

UNSPSC 6.0130211811

UNSPSC 1139121410

Nominal voltage UN1000 V

Nominal cross section2.5 mm²

Area of applicationRailway industry

ASD level0.02 g²/Hz

Shock duration30 ms

Static insulating material application in cold-60 °C

Cable lug width, max.6 mm

Nominal current IN24 A

Bolt diameter3 mm

Tightening torque, min0.6 Nm

Ambient temperature (actuation)-5 °C ... 70 °C

NoteNote: the BE-RT... path exte...

Colorgreen-yellow

Insulating material groupI

Test spectrumService life test category 1...

Oscillation, broadband noise test resultTest passed

Number of shocks per direction3

Shock test resultTest passed

Length66 mm

Max. cross section for cable lug connection2.5 mm²

Screw threadM3

ECLASS 4.027141100

Test directionsX-, Y- and Z-axis (pos. and ...

Shock formHalf-sine

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/7,551 mm

Min. cross section for cable lug connection1 mm²

UNSPSC 19.039121410

UNSPSC 21.039121410

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Flammability rating according to UL 94V0

Open side panelYes

Potentials1

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Width12.3 mm

Height NS 35/1558.5 mm

Connection in acc. with standardCUL

Ambient temperature (assembly)-5 °C ... 70 °C

China RoHSEnvironmentally friendly use...

Rated surge voltage8 kV

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Permissible humidity (storage/transport)30 % ... 70 %

ECLASS 6.027141100

ECLASS 11.027141120

ETIM 2.0EC000897

ETIM 6.0EC000897

ECLASS 9.027141120

UNSPSC 18.039121410

Hole diameter, min.3.2 mm

Tightening torque max0.8 Nm

REACh SVHCLead 7439-92-1

ECLASS 10.0.127141120

ECLASS 4.127141100

ETIM 3.0EC000897

ETIM 7.0EC000897

UNSPSC 7.090139121410

UNSPSC 20.039121410

Operating temperature-60 °C ... 105 °C (max. shor...

Back of the hand protection-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Setpoint-

Maximum power dissipation for nominal condition-

Shock protection test specification-

Note regarding shock protection-

Result of voltage-drop test-

Tight fit on carrier-

Short-time current-

Finger protection-

Power frequency withstand voltage setpoint-

Short circuit stability result-

Result of thermal test-

Result of surge voltage test-

Result of tight fit on support-

Conductor cross section short circuit testing-

Proof of thermal characteristics (needle flame) effective duration-

Result of power-frequency withstand voltage test-

Result of temperature-rise test-

Requirement temperature-rise test-

Height NS 32-

Pitch-