2702383 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  116.6 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Inrush current
  max. 100 mA
• Filter time
  4 ms (at A1 in the event of voltage dips at Us)
• Number of outputs
  1 (digital, PNP)
• Switching capacity
  min. 50 mW
• Output fuse
  10 A gL/gG
• Voltage
  typ. 23 V DC (US - 1 V)
• Typical response time at US
  < 50 ms
• Recovery time
  < 100 ms
• Nominal operating mode
  100% operating factor
• Assembly instructions
  See derating curve
• pluggable
  Yes
• Conductor cross-section AWG
  24 ... 16
• Rated insulation voltage
  250 V AC
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.1
  27371900
• ETIM 7.0
  EC001449
• UNSPSC 18.0
  39122205
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
Maximum altitude
max. 2000 m (Above sea level)
Rated control supply current IS
typ. 80 mA
Protective circuit
Surge protection Suppressor diode
Contact material
AgSnO
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Safety Integrity Level (SIL)
3 (In conjunction with suitable evaluating device)
Degree of pollution
2
ECLASS 4.0
40020600
ECLASS 4.1
40020600
ECLASS 9.0
27371819
UNSPSC 13.2
39121501
UNSPSC 20.0
39122205
Width
17.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Power consumption at US
typ. 1.92 W
Output description
non-safety-related
Contact type
1 confirmation current path
Limiting continuous current
100 mA
Switching frequency
max. 0.5 Hz
Current
max. 100 mA
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Connection method
Push-in connection
Stripping length
8 mm
Performance level (PL)
e (In conjunction with suitable evaluating device)
Safety Integrity Level Claim Limit (SIL CL)
3 (In conjunction with suitable evaluating device)
Overvoltage category
III
ECLASS 10.0.1
27371819
ECLASS 7.0
27371819
ETIM 3.0
EC001449
UNSPSC 21.0
39122205
Depth
114.5 mm
Designation
Air clearances and creepage distances between the power circuits
Output name
Confirmation current path
Switching voltage
min. 5 V AC/DC
Sq. Total current
64 A2 (observe derating)
Mechanical service life
10x 106 cycles
Short-circuit protection
Yes
Typical pickup time at US
< 50 ms (when controlled via A1/A2)
Net weight
210.1 g
Housing color
yellow
Status display
2 x green LEDs
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Standards/regulations
DIN EN 50178
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths
Conformance
CE-compliant
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
ECLASS 11.0
27371819
ETIM 6.0
EC001449
UNSPSC 19.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-20 °C ... 60 °C (observe derating)
Rated control circuit supply voltage US
24 V DC -20 % / +25 %
Typical release time at US
< 25 ms (when controlled via A1/A2)
Mounting position
vertical or horizontal
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Category
4 (In conjunction with suitable evaluating device)
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 6 ms.)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371900
ECLASS 6.0
27371800
ETIM 4.0
EC001449