2900509 Phoenix Contact Electrical Safety Devices


Part#:2900509
Manufacturer:Phoenix Contact
Category:Electrical Safety Devices
Product Lifecycle:Active
Mar 14, 2025
Product description
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, single or two-channel operation, 3 enabling current paths, nominal input voltage of 24 V AC/DC, plug-in screw terminal blocks
Product Details
- Typical input current at UN 140 mA AC
- Width 22.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Typical release time 45 ms (single-channel)
- Concurrence ∞
- Protective circuit Surge protection Suppressor diode
- Limiting continuous current 6 A (N/O contact)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Mounting position any
- Min. degree of protection of inst. location IP54
- pluggable Yes
- Designation Air clearances and creepage distances between the power circuits
- Category 4
- Rated surge voltage/insulation 4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
- Depth 114.5 mm
- Input voltage range in reference to UN 0.85 ... 1.1
- Recovery time 1 s
- Maximum switching voltage 250 V AC/DC
- Sq. Total current 72 A2 (ITH2 = I12 + I22 + I32)
- Switching capacity min. 100 mW
- Nominal operating mode 100% operating factor
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Stripping length 7 mm
- Safety Integrity Level (SIL) 3
- Overvoltage category III
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 40020600
- ETIM 7.0 EC001449
- UNSPSC 13.2 39121501
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Nominal input voltage UN 24 V AC/DC
- Operating voltage display Green LED
- Contact material AgSnO2, + 0.2 µm Au
- Maximum inrush current 6 A
- Mechanical service life approx. 107 cycles
- Net weight 137.48 g
- Connection method Screw connection
- Stop category 0
- Standards/regulations DIN EN 50178/VDE 0160
- Shock 15g
- ECLASS 10.0.1 27371819
- ECLASS 5.0 27371900
- ECLASS 9.0 27371819
- UNSPSC 11 39121501
- UNSPSC 7.0901 39121501
- UNSPSC 19.0 39122205
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 55 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Typical response time 20 ms (man. start)
- Status display Green LED
- Minimum switching voltage 10 V AC/DC
- Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
- Output fuse 10 A gL/gG NEOZED (N/O contact)
- Mounting type DIN rail mounting
- Housing color yellow
- Conductor cross-section AWG 24 ... 12
- Screw thread M3
- Performance level (PL) e
- Degree of pollution 2
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 4.0 40020600
- ECLASS 6.0 27371800
- ETIM 6.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 21.0 39122205
- Height 99 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Voltage at input/start and feedback circuit approx. 24 V DC
- Max. permissible overall conductor resistance approx. 50 Ω (Input and start circuits at UN)
- Contact type 3 enabling current paths
- Inrush current, minimum 10 mA
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Switching capacity (360/h cycles) 6 A (24 V DC)
- Degree of protection IP20
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Safety Integrity Level Claim Limit (SIL CL) 3
- Rated insulation voltage 250 V
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371900
- ETIM 4.0 EC001449
- ETIM 3.0 EC001449
- UNSPSC 18.0 39122205
- ECLASS 11.0 27371819
- ECLASS 7.0 27371819
- UNSPSC 6.01 30211901
- UNSPSC 20.0 39122205
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
2900509 Phoenix Contact
Get a quick Quote!
Request a quote, and we will send you price within minutes.
Stock:
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 2900509 with other products
Typical input current at UN
Width
Max. permissible relative humidity (operation)
Typical release time
Concurrence
Protective circuit
Limiting continuous current
Relay type
Mounting position
Min. degree of protection of inst. location
pluggable
Designation
Category
Rated surge voltage/insulation
Depth
Input voltage range in reference to UN
Recovery time
Maximum switching voltage
Sq. Total current
Switching capacity min.
Nominal operating mode
Conductor cross section solid
Stripping length
Safety Integrity Level (SIL)
Overvoltage category
REACh SVHC
ECLASS 4.1
ETIM 7.0
UNSPSC 13.2
Ambient temperature (storage/transport)
Nominal input voltage UN
Operating voltage display
Contact material
Maximum inrush current
Mechanical service life
Net weight
Connection method
Stop category
Standards/regulations
Shock
ECLASS 10.0.1
ECLASS 5.0
ECLASS 9.0
UNSPSC 11
UNSPSC 7.0901
UNSPSC 19.0
Utilization restriction
Ambient temperature (operation)
Maximum altitude
Typical response time
Status display
Minimum switching voltage
Maximum interrupting rating (inductive load)
Output fuse
Mounting type
Housing color
Conductor cross-section AWG
Screw thread
Performance level (PL)
Degree of pollution
Vibration (operation)
ECLASS 4.0
ECLASS 6.0
ETIM 6.0
UNSPSC 12.01
UNSPSC 21.0
Height
Max. permissible humidity (storage/transport)
Voltage at input/start and feedback circuit
Max. permissible overall conductor resistance
Contact type
Inrush current, minimum
Interrupting rating (ohmic load) max.
Switching capacity (360/h cycles)
Degree of protection
Conductor cross section flexible
Safety Integrity Level Claim Limit (SIL CL)
Rated insulation voltage
China RoHS
ECLASS 5.1
ETIM 4.0
ETIM 3.0
UNSPSC 18.0
ECLASS 11.0
ECLASS 7.0
UNSPSC 6.01
UNSPSC 20.0
Height
Max. permissible relative humidity (operation)
Inrush current
Filter time
Number of outputs
Switching capacity
Output fuse
Voltage
Typical response time at US
Recovery time
Nominal operating mode
Assembly instructions
pluggable
Conductor cross-section AWG
Rated insulation voltage
China RoHS
ECLASS 5.1
ETIM 7.0
UNSPSC 18.0
Ambient temperature (storage/transport)
Maximum altitude
Rated control supply current IS
Protective circuit
Contact material
Conductor cross-section flexible with ferrule without plastic sleeve
Stop category
Safety Integrity Level (SIL)
Degree of pollution
ECLASS 4.0
ECLASS 4.1
ECLASS 9.0
UNSPSC 13.2
UNSPSC 20.0
Width
Max. permissible humidity (storage/transport)
Power consumption at US
Output description
Contact type
Limiting continuous current
Switching frequency
Current
Maximum inrush current
Relay type
Degree of protection
Connection method
Stripping length
Performance level (PL)
Safety Integrity Level Claim Limit (SIL CL)
Overvoltage category
ECLASS 10.0.1
ECLASS 7.0
ETIM 3.0
UNSPSC 21.0
Depth
Designation
Output name
Switching voltage
Sq. Total current
Mechanical service life
Short-circuit protection
Typical pickup time at US
Net weight
Housing color
Status display
Conductor cross section flexible
Conductor cross-section flexible with ferrule and plastic sleeve
Standards/regulations
Rated surge voltage/insulation
Conformance
Vibration (operation)
ECLASS 11.0
ETIM 6.0
UNSPSC 19.0
Utilization restriction
Ambient temperature (operation)
Rated control circuit supply voltage US
Typical release time at US
Mounting position
Mounting type
Min. degree of protection of inst. location
Conductor cross section solid
Category
Shock
REACh SVHC
ECLASS 5.0
ECLASS 6.0
ETIM 4.0
Flammability rating according to UL 94
China RoHS
ECLASS 4.1
ETIM 2.0
ETIM 7.0
UNSPSC 12.01
UNSPSC 19.0
Designation
ECLASS 10.0.1
ECLASS 7.0
UNSPSC 6.01
UNSPSC 21.0
Width
Depth
Degree of protection
Ambient temperature (operation)
Typical input current at UN
Typical release time
Operating voltage display
Contact type
Contact material
ECLASS 11.0
ECLASS 6.0
ETIM 3.0
UNSPSC 11
UNSPSC 20.0
Utilization restriction
Height
Ambient temperature (storage/transport)
Nominal input voltage UN
Typical response time
Protective circuit
Power dissipation for nominal condition
Type of switch contact
Maximum switching voltage
Mounting position
Limiting continuous current
Operating mode
Connection name
Screw thread
Standards/regulations
Identification
ECLASS 5.0
ECLASS 4.0
ECLASS 9.0
ETIM 4.0
UNSPSC 13.2
Connection method
Conductor cross section flexible
Min. switching current
Test voltage
Mechanical service life
Conductor cross section solid
UNSPSC 18.0
ETIM 6.0
Maximum inrush current
Note
Stripping length
Conductor cross section AWG
Pollution degree
REACh SVHC
Minimum switching voltage
Interrupting rating (ohmic load) max.
Switching capacity
Assembly instructions
Connection in acc. with standard
Overvoltage category
ECLASS 5.1
UNSPSC 7.0901
Selected product

2900509
Phoenix Contact
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to ...
Typical input current at UN140 mA AC
Width22.5 mm
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Typical release time45 ms (single-channel)
Concurrence∞
Protective circuitSurge protection Suppressor diode
Limiting continuous current6 A (N/O contact)
Relay typeElectromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting positionany
Min. degree of protection of inst. locationIP54
pluggableYes
DesignationAir clearances and creepage distances between the power circuits
Category4
Rated surge voltage/insulation4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
Depth114.5 mm
Input voltage range in reference to UN0.85 ... 1.1
Recovery time1 s
Maximum switching voltage250 V AC/DC
Sq. Total current72 A2 (ITH2 = I12 + I22 + I32)
Switching capacity min.100 mW
Nominal operating mode100% operating factor
Conductor cross section solid0.2 mm² ... 2.5 mm²
Stripping length7 mm
Safety Integrity Level (SIL)3
Overvoltage categoryIII
REACh SVHCLead 7439-92-1
ECLASS 4.140020600
ETIM 7.0EC001449
UNSPSC 13.239121501
Ambient temperature (storage/transport)-40 °C ... 70 °C
Nominal input voltage UN24 V AC/DC
Operating voltage displayGreen LED
Contact materialAgSnO2, + 0.2 µm Au
Maximum inrush current6 A
Mechanical service lifeapprox. 107 cycles
Net weight137.48 g
Connection methodScrew connection
Stop category0
Standards/regulationsDIN EN 50178/VDE 0160
Shock15g
ECLASS 10.0.127371819
ECLASS 5.027371900
ECLASS 9.027371819
UNSPSC 1139121501
UNSPSC 7.090139121501
UNSPSC 19.039122205
Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)-20 °C ... 55 °C
Maximum altitude≤ 2000 m (Above sea level)
Typical response time20 ms (man. start)
Status displayGreen LED
Minimum switching voltage10 V AC/DC
Maximum interrupting rating (inductive load)48 W (24 V DC, τ = 40 ms)
Output fuse10 A gL/gG NEOZED (N/O contact)
Mounting typeDIN rail mounting
Housing coloryellow
Conductor cross-section AWG24 ... 12
Screw threadM3
Performance level (PL)e
Degree of pollution2
Vibration (operation)10 Hz ... 150 Hz, 2g
ECLASS 4.040020600
ECLASS 6.027371800
ETIM 6.0EC001449
UNSPSC 12.0139121501
UNSPSC 21.039122205
Height99 mm
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Voltage at input/start and feedback circuitapprox. 24 V DC
Max. permissible overall conductor resistanceapprox. 50 Ω (Input and start circuits at UN)
Contact type3 enabling current paths
Inrush current, minimum10 mA
Interrupting rating (ohmic load) max.144 W (24 V DC, τ = 0 ms)
Switching capacity (360/h cycles)6 A (24 V DC)
Degree of protectionIP20
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Safety Integrity Level Claim Limit (SIL CL)3
Rated insulation voltage250 V
China RoHSEnvironmentally Friendly Use Period = 50 years
ECLASS 5.127371900
ETIM 4.0EC001449
ETIM 3.0EC001449
UNSPSC 18.039122205
ECLASS 11.027371819
ECLASS 7.027371819
UNSPSC 6.0130211901
UNSPSC 20.039122205
Height-
Max. permissible relative humidity (operation)-
Inrush current-
Filter time-
Number of outputs-
Switching capacity-
Output fuse-
Voltage-
Typical response time at US-
Recovery time-
Nominal operating mode-
Assembly instructions-
pluggable-
Conductor cross-section AWG-
Rated insulation voltage-
China RoHS-
ECLASS 5.1-
ETIM 7.0-
UNSPSC 18.0-
Ambient temperature (storage/transport)-
Maximum altitude-
Rated control supply current IS-
Protective circuit-
Contact material-
Conductor cross-section flexible with ferrule without plastic sleeve-
Stop category-
Safety Integrity Level (SIL)-
Degree of pollution-
ECLASS 4.0-
ECLASS 4.1-
ECLASS 9.0-
UNSPSC 13.2-
UNSPSC 20.0-
Width-
Max. permissible humidity (storage/transport)-
Power consumption at US-
Output description-
Contact type-
Limiting continuous current-
Switching frequency-
Current-
Maximum inrush current-
Relay type-
Degree of protection-
Connection method-
Stripping length-
Performance level (PL)-
Safety Integrity Level Claim Limit (SIL CL)-
Overvoltage category-
ECLASS 10.0.1-
ECLASS 7.0-
ETIM 3.0-
UNSPSC 21.0-
Depth-
Designation-
Output name-
Switching voltage-
Sq. Total current-
Mechanical service life-
Short-circuit protection-
Typical pickup time at US-
Net weight-
Housing color-
Status display-
Conductor cross section flexible-
Conductor cross-section flexible with ferrule and plastic sleeve-
Standards/regulations-
Rated surge voltage/insulation-
Conformance-
Vibration (operation)-
ECLASS 11.0-
ETIM 6.0-
UNSPSC 19.0-
Utilization restriction-
Ambient temperature (operation)-
Rated control circuit supply voltage US-
Typical release time at US-
Mounting position-
Mounting type-
Min. degree of protection of inst. location-
Conductor cross section solid-
Category-
Shock-
REACh SVHC-
ECLASS 5.0-
ECLASS 6.0-
ETIM 4.0-
Flammability rating according to UL 94-
China RoHS-
ECLASS 4.1-
ETIM 2.0-
ETIM 7.0-
UNSPSC 12.01-
UNSPSC 19.0-
Designation-
ECLASS 10.0.1-
ECLASS 7.0-
UNSPSC 6.01-
UNSPSC 21.0-
Width-
Depth-
Degree of protection-
Ambient temperature (operation)-
Typical input current at UN-
Typical release time-
Operating voltage display-
Contact type-
Contact material-
ECLASS 11.0-
ECLASS 6.0-
ETIM 3.0-
UNSPSC 11-
UNSPSC 20.0-
Utilization restriction-
Height-
Ambient temperature (storage/transport)-
Nominal input voltage UN-
Typical response time-
Protective circuit-
Power dissipation for nominal condition-
Type of switch contact-
Maximum switching voltage-
Mounting position-
Limiting continuous current-
Operating mode-
Connection name-
Screw thread-
Standards/regulations-
Identification-
ECLASS 5.0-
ECLASS 4.0-
ECLASS 9.0-
ETIM 4.0-
UNSPSC 13.2-
Connection method-
Conductor cross section flexible-
Min. switching current-
Test voltage-
Mechanical service life-
Conductor cross section solid-
UNSPSC 18.0-
ETIM 6.0-
Maximum inrush current-
Note-
Stripping length-
Conductor cross section AWG-
Pollution degree-
REACh SVHC-
Minimum switching voltage-
Interrupting rating (ohmic load) max.-
Switching capacity-
Assembly instructions-
Connection in acc. with standard-
Overvoltage category-
ECLASS 5.1-
UNSPSC 7.0901-
About the manufacturer

Powermatic Associates is an authorized Phoenix Contact distributor, proudly offering a wide array of innovative industrial solutions that cater to modern technological demands. Phoenix Contact is a global leader renowned for its high-quality products in the fields of electrical engineering and automation technology. Their extensive catalog encompasses everything from connection technology, interface systems, and surge protection to automation software and control technology, making them a versatile choice for various industrial applications. At Powermatic Associates, we deliver Phoenix Contact’s pioneering connectivity and power management solutions, which include terminal blocks, connectors, relays, and PLCs. These components are essential for creating efficient and reliable electrical connections in diverse environments, ensuring seamless system integration. The company's comprehensive range of Industrial Internet of Things (IIoT) solutions facilitates intelligent networking, enabling customers to optimize their automation processes with cutting-edge technology. Phoenix Contact's emphasis on sustainability and innovation reflects in their energy management systems and renewable energy solutions. By incorporating these into your operations, you not only enhance efficiency but also contribute to sustainable practices, aligning with modern environmental standards. Powermatic Associates recognizes the significance of such advancements and partners with Phoenix Contact to provide expert engineering support and tailored solutions, helping you implement smart technologies that drive productivity and minimize costs. With a focus on safety and reliability, Phoenix Contact offers advanced surge protection devices and signal conditioners that safeguard your equipment against voltage spikes and ensure data integrity. In collaboration with Powermatic Associates, customers gain access to robust technical support and consultation, ensuring that every project benefits from personalized guidance and quick resolution of technical challenges. Our partnership extends the reach of Phoenix Contact’s globally recognized industrial automation products, including Human Machine Interfaces (HMIs) and Ethernet switches, empowering businesses with enhanced operational control and communication capabilities. Customers can trust Powermatic Associates to deliver prompt shipping and thorough assistance, ensuring that Phoenix Contact’s top-tier products are seamlessly integrated into their workflows for optimal performance.
About the Product Category
Devices for electrical safety are tools or equipment engineered to guard against electrical risks and safeguard individuals, property, and equipment from possible threats linked to electricity. These devices are utilized in both industrial and residential settings to guarantee the secure usage and handling of electrical systems.

Recently viewed products
Relevant products
FAQ
2 in stock
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, single or two-channel operation, 3 enabling current paths, nominal input voltage of 24 V AC/DC, plug-in screw terminal blocks
Similar products from: Electrical Safety Devices
What can I help you find today?