3075870 Phoenix Contact Terminal Blocks
Part#:3075870
Manufacturer:Phoenix Contact
Category:Terminal Blocks
Product Lifecycle:Active
Mar 15, 2025
Product description
Feed-through terminal block with bolt connection method, cross section: 2.5 - 35 mm², AWG: 12 - 2, width 17 mm, color: gray
Product Details
- Color gray
- Degree of pollution 3
- Nominal voltage UN 800 V
- Result of tight fit on support Test passed
- Conductor cross section short circuit testing 35 mm²
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 1, class B, body mounted
- ASD level 1.857 (m/s2)2/Hz
- Shock form Half-sine
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Potentials 1
- Overvoltage category III
- Maximum load current 125 A (with 35 mm² conductor cross section)
- Open side panel No
- Setpoint 10 N
- Short-time current 4.2 kA
- Test duration per axis 5 h
- Number of shocks per direction 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Length 80.8 mm
- Connection method Bolt connection
- Max. cross section for cable lug connection 6 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 11.0 27141120
- ECLASS 6.0 27141100
- ECLASS 7.0 27141120
- UNSPSC 12.01 39121410
- Number of levels 1
- Insulating material PA
- Maximum power dissipation for nominal condition 4.06 W
- Power frequency withstand voltage setpoint 2 kV
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of temperature-rise test Test passed
- Oscillation, broadband noise test result Test passed
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 17 mm
- Height NS 35/15 57.3 mm
- Cable lug connection according to standard DIN 46237:1970-07
- AWG min 14
- Tightening torque, min 3.2 Nm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.0 27141100
- ECLASS 5.0 27141100
- ETIM 4.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- Nominal cross section 35 mm²
- Rated surge voltage 8 kV
- Result of surge voltage test Test passed
- Tight fit on carrier NS 35/NS 32
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of thermal test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 30 ms
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 32 54.8 mm
- Connection 1 level
- Connection in acc. with standard CUL
- Cable lug width, max. 11 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.1 27141100
- ETIM 3.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 18.0 39121410
- Number of connections 2
- Flammability rating according to UL 94 V0
- Insulating material group I
- Nominal current IN 125 A
- Result of power-frequency withstand voltage test Test passed
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Acceleration 5g
- Shock test result Test passed
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- End cover width 2.2 mm
- Pitch 17 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- AWG max 10
- Bolt diameter 6 mm
- Screw thread M6
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.1 27141100
- ECLASS 9.0 27141120
- UNSPSC 6.01 30211811
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- Height NS 35/7,5 49.8 mm
- Min. cross section for cable lug connection 2.5 mm²
- Hole diameter, min. 6.5 mm
- Tightening torque max 3.7 Nm
- ECLASS 10.0.1 27141120
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ETIM 7.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 21.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
3075870 Phoenix Contact
Get a quick Quote!
Request a quote, and we will send you price within minutes.
Stock:
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 3075870 with other products
Color
Degree of pollution
Nominal voltage UN
Result of tight fit on su...
Conductor cross section s...
Proof of thermal characte...
Test spectrum
ASD level
Shock form
Surface flammability NFPA...
Fire protection for rail ...
Potentials
Overvoltage category
Maximum load current
Open side panel
Setpoint
Short-time current
Test duration per axis
Number of shocks per dire...
Smoke gas toxicity NFPA 1...
Length
Connection method
Max. cross section for ca...
Permissible humidity (sto...
ECLASS 11.0
ECLASS 6.0
ECLASS 7.0
UNSPSC 12.01
Number of levels
Insulating material
Maximum power dissipation...
Power frequency withstand...
Result of the test for me...
Result of temperature-ris...
Oscillation, broadband no...
Test frequency
Test specification, shock...
Temperature index of insu...
Static insulating materia...
Fire protection for rail ...
Width
Height NS 35/15
Cable lug connection acco...
AWG min
Tightening torque, min
Ambient temperature (stor...
ECLASS 4.0
ECLASS 5.0
ETIM 4.0
UNSPSC 13.2
UNSPSC 20.0
Nominal cross section
Rated surge voltage
Result of surge voltage t...
Tight fit on carrier
Requirement temperature-r...
Result of thermal test
Test specification, oscil...
Test directions
Shock duration
Relative insulation mater...
Calorimetric heat release...
Fire protection for rail ...
Height NS 32
Connection
Connection in acc. with s...
Cable lug width, max.
Operating temperature
Ambient temperature (asse...
ECLASS 4.1
ETIM 3.0
ETIM 6.0
UNSPSC 18.0
Number of connections
Flammability rating accor...
Insulating material group
Nominal current IN
Result of power-frequency...
Result of voltage-drop te...
Short circuit stability r...
Acceleration
Shock test result
Specific optical density ...
Fire protection for rail ...
End cover width
Pitch
Stripping length
AWG max
Bolt diameter
Screw thread
Ambient temperature (actu...
ECLASS 5.1
ECLASS 9.0
UNSPSC 6.01
UNSPSC 11
UNSPSC 19.0
Height NS 35/7,5
Min. cross section for ca...
Hole diameter, min.
Tightening torque max
ECLASS 10.0.1
China RoHS
ETIM 7.0
UNSPSC 7.0901
UNSPSC 21.0
ETIM 2.0
Back of the hand protecti...
Note
Shock protection test spe...
Note regarding shock prot...
Finger protection
Area of application
REACh SVHC
Selected product
3075870
Phoenix Contact
Feed-through terminal block with bolt connection method, cross section: 2.5 - 35 mm², AWG: 12 - 2, w...
Colorgray
Degree of pollution3
Nominal voltage UN800 V
Result of tight fit on supportTest passed
Conductor cross section short circuit testing35 mm²
Proof of thermal characteristics (needle flame) effective duration30 s
Test spectrumService life test category 1...
ASD level1.857 (m/s2)2/Hz
Shock formHalf-sine
Surface flammability NFPA 130 (ASTM E 162)passed
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3
Potentials1
Overvoltage categoryIII
Maximum load current125 A (with 35 mm² conductor...
Open side panelNo
Setpoint10 N
Short-time current4.2 kA
Test duration per axis5 h
Number of shocks per direction3
Smoke gas toxicity NFPA 130 (SMP 800C)passed
Length80.8 mm
Connection methodBolt connection
Max. cross section for cable lug connection6 mm²
Permissible humidity (storage/transport)30 % ... 70 %
ECLASS 11.027141120
ECLASS 6.027141100
ECLASS 7.027141120
UNSPSC 12.0139121410
Number of levels1
Insulating materialPA
Maximum power dissipation for nominal condition4.06 W
Power frequency withstand voltage setpoint2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed
Result of temperature-rise testTest passed
Oscillation, broadband noise test resultTest passed
Test frequencyf1 = 5 Hz to f2 = 150 Hz
Test specification, shock testDIN EN 50155 (VDE 0115-200):...
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C
Static insulating material application in cold-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3
Width17 mm
Height NS 35/1557.3 mm
Cable lug connection according to standardDIN 46237:1970-07
AWG min14
Tightening torque, min3.2 Nm
Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...
ECLASS 4.027141100
ECLASS 5.027141100
ETIM 4.0EC000897
UNSPSC 13.239121410
UNSPSC 20.039121410
Nominal cross section35 mm²
Rated surge voltage8 kV
Result of surge voltage testTest passed
Tight fit on carrierNS 35/NS 32
Requirement temperature-rise testIncrease in temperature ≤ 45...
Result of thermal testTest passed
Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...
Test directionsX-, Y- and Z-axis (pos. and ...
Shock duration30 ms
Relative insulation material temperature index (Elec., UL 746 B)130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3
Height NS 3254.8 mm
Connection1 level
Connection in acc. with standardCUL
Cable lug width, max.11 mm
Operating temperature-60 °C ... 105 °C (max. shor...
Ambient temperature (assembly)-5 °C ... 70 °C
ECLASS 4.127141100
ETIM 3.0EC000897
ETIM 6.0EC000897
UNSPSC 18.039121410
Number of connections2
Flammability rating according to UL 94V0
Insulating material groupI
Nominal current IN125 A
Result of power-frequency withstand voltage testTest passed
Result of voltage-drop testTest passed
Short circuit stability resultTest passed
Acceleration5g
Shock test resultTest passed
Specific optical density of smoke NFPA 130 (ASTM E 662)passed
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3
End cover width2.2 mm
Pitch17 mm
Stripping lengthThe stripping length depends...
AWG max10
Bolt diameter6 mm
Screw threadM6
Ambient temperature (actuation)-5 °C ... 70 °C
ECLASS 5.127141100
ECLASS 9.027141120
UNSPSC 6.0130211811
UNSPSC 1139121410
UNSPSC 19.039121410
Height NS 35/7,549.8 mm
Min. cross section for cable lug connection2.5 mm²
Hole diameter, min.6.5 mm
Tightening torque max3.7 Nm
ECLASS 10.0.127141120
China RoHSEnvironmentally friendly use...
ETIM 7.0EC000897
UNSPSC 7.090139121410
UNSPSC 21.039121410
ETIM 2.0-
Back of the hand protection-
Note-
Shock protection test specification-
Note regarding shock protection-
Finger protection-
Area of application-
REACh SVHC-
3058127
Phoenix Contact
Feed-through terminal block with bolt connection method, cross section: 0.1 - 6 mm², AWG: 26 - 10, w...
Colorgray
Degree of pollution3
Nominal voltage UN800 V
Result of tight fit on supportTest passed
Conductor cross section short circuit testing4 mm²
Proof of thermal characteristics (needle flame) effective duration30 s
Test spectrumService life test category 1...
ASD level1.857 (m/s2)2/Hz
Shock formHalf-sine
Surface flammability NFPA 130 (ASTM E 162)passed
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3
Potentials1
Overvoltage categoryIII
Maximum load current32 A
Open side panelYes
Setpoint1 N
Short-time current0.48 kA
Test duration per axis5 h
Number of shocks per direction3
Smoke gas toxicity NFPA 130 (SMP 800C)passed
Length53.3 mm
Connection methodBolt connection
Max. cross section for cable lug connection2.5 mm²
Permissible humidity (storage/transport)30 % ... 70 %
ECLASS 11.027141120
ECLASS 6.027141100
ECLASS 7.027141120
UNSPSC 12.0139121410
Number of levels1
Insulating materialPA
Maximum power dissipation for nominal condition1.02 W
Power frequency withstand voltage setpoint2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed
Result of temperature-rise testTest passed
Oscillation, broadband noise test resultTest passed
Test frequencyf1 = 5 Hz to f2 = 150 Hz
Test specification, shock testDIN EN 50155 (VDE 0115-200):...
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C
Static insulating material application in cold-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3
Width9 mm
Height NS 35/1554.6 mm
Cable lug connection according to standardDIN 46237:1970-07
AWG min26
Tightening torque, min1.2 Nm
Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...
ECLASS 4.027141100
ECLASS 5.027141100
ETIM 4.0EC000897
UNSPSC 13.239121410
UNSPSC 20.039121410
Nominal cross section4 mm²
Rated surge voltage8 kV
Result of surge voltage testTest passed
Tight fit on carrierNS 35/NS 32
Requirement temperature-rise testIncrease in temperature ≤ 45...
Result of thermal testTest passed
Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...
Test directionsX-, Y- and Z-axis (pos. and ...
Shock duration30 ms
Relative insulation material temperature index (Elec., UL 746 B)130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3
Height NS 3252.1 mm
Connection1 level
Connection in acc. with standardCUL
Cable lug width, max.8 mm
Operating temperature-60 °C ... 105 °C (max. shor...
Ambient temperature (assembly)-5 °C ... 70 °C
ECLASS 4.127141100
ETIM 3.0EC000897
ETIM 6.0EC000897
UNSPSC 18.039121410
Number of connections2
Flammability rating according to UL 94V0
Insulating material groupI
Nominal current IN32 A
Result of power-frequency withstand voltage testTest passed
Result of voltage-drop testTest passed
Short circuit stability resultTest passed
Acceleration5g
Shock test resultTest passed
Specific optical density of smoke NFPA 130 (ASTM E 662)passed
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3
End cover width2.2 mm
Pitch9 mm
Stripping lengthThe stripping length depends...
AWG max10
Bolt diameter4 mm
Screw threadM4
Ambient temperature (actuation)-5 °C ... 70 °C
ECLASS 5.127141100
ECLASS 9.027141120
UNSPSC 6.0130211811
UNSPSC 1139121410
UNSPSC 19.039121410
Height NS 35/7,547.1 mm
Min. cross section for cable lug connection0.5 mm²
Hole diameter, min.4.3 mm
Tightening torque max1.4 Nm
ECLASS 10.0.127141120
China RoHSEnvironmentally friendly use...
ETIM 7.0EC000897
UNSPSC 7.090139121410
UNSPSC 21.039121410
ETIM 2.0EC000897
Back of the hand protection-
Note-
Shock protection test specification-
Note regarding shock protection-
Finger protection-
Area of application-
REACh SVHC-
3049013
Phoenix Contact
Bolt connection terminal block, Note: the BE-RT... path extension is to be used for non-insulated ca...
Colorgray
Degree of pollution3
Nominal voltage UN1000 V (Rated voltage for op...
Result of tight fit on supportTest passed
Conductor cross section short circuit testing2.5 mm²
Proof of thermal characteristics (needle flame) effective duration30 s
Test spectrumService life test category 1...
ASD level1.857 (m/s2)2/Hz
Shock formHalf-sine
Surface flammability NFPA 130 (ASTM E 162)passed
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3
Potentials1
Overvoltage categoryIII
Maximum load current24 A (with a 2.5 mm² conduct...
Open side panelYes
Setpoint1 N
Short-time current0.3 kA
Test duration per axis5 h
Number of shocks per direction3
Smoke gas toxicity NFPA 130 (SMP 800C)passed
Length66 mm
Connection methodBolt connection
Max. cross section for cable lug connection2.5 mm²
Permissible humidity (storage/transport)30 % ... 70 %
ECLASS 11.027141120
ECLASS 6.027141100
ECLASS 7.027141120
UNSPSC 12.0139121410
Number of levels1
Insulating materialPA
Maximum power dissipation for nominal condition0.77 W
Power frequency withstand voltage setpoint2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed
Result of temperature-rise testTest passed
Oscillation, broadband noise test resultTest passed
Test frequencyf1 = 5 Hz to f2 = 150 Hz
Test specification, shock testDIN EN 50155 (VDE 0115-200):...
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C
Static insulating material application in cold-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3
Width12.3 mm
Height NS 35/1558.5 mm
Cable lug connection according to standardDIN 46237:1970-07
AWG min18
Tightening torque, min0.6 Nm
Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...
ECLASS 4.027141100
ECLASS 5.027141100
ETIM 4.0EC000897
UNSPSC 13.239121410
UNSPSC 20.039121410
Nominal cross section2.5 mm²
Rated surge voltage8 kV
Result of surge voltage testTest passed
Tight fit on carrierNS 35
Requirement temperature-rise testIncrease in temperature ≤ 45...
Result of thermal testTest passed
Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...
Test directionsX-, Y- and Z-axis (pos. and ...
Shock duration30 ms
Relative insulation material temperature index (Elec., UL 746 B)130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3
Height NS 32-
Connection1 level
Connection in acc. with standardCUL
Cable lug width, max.6 mm
Operating temperature-60 °C ... 105 °C (max. shor...
Ambient temperature (assembly)-5 °C ... 70 °C
ECLASS 4.127141100
ETIM 3.0EC000897
ETIM 6.0EC000897
UNSPSC 18.039121410
Number of connections2
Flammability rating according to UL 94V0
Insulating material groupI
Nominal current IN24 A
Result of power-frequency withstand voltage testTest passed
Result of voltage-drop testTest passed
Short circuit stability resultTest passed
Acceleration5g
Shock test resultTest passed
Specific optical density of smoke NFPA 130 (ASTM E 662)passed
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3
End cover width2.2 mm
Pitch-
Stripping lengthThe stripping length depends...
AWG max14
Bolt diameter3 mm
Screw threadM3
Ambient temperature (actuation)-5 °C ... 70 °C
ECLASS 5.127141100
ECLASS 9.027141120
UNSPSC 6.0130211811
UNSPSC 1139121410
UNSPSC 19.039121410
Height NS 35/7,551 mm
Min. cross section for cable lug connection1 mm²
Hole diameter, min.3.2 mm
Tightening torque max0.8 Nm
ECLASS 10.0.127141120
China RoHSEnvironmentally friendly use...
ETIM 7.0EC000897
UNSPSC 7.090139121410
UNSPSC 21.039121410
ETIM 2.0EC000897
Back of the hand protectionguaranteed
NoteNote: the BE-RT... path exte...
Shock protection test specificationDIN EN 50274 (VDE 0660-514):...
Note regarding shock protectionElectric shock protection on...
Finger protectionguaranteed
Area of applicationRailway industry
REACh SVHCLead 7439-92-1
About the manufacturer
Powermatic Associates is an authorized Phoenix Contact distributor, proudly offering a wide array of innovative industrial solutions that cater to modern technological demands. Phoenix Contact is a global leader renowned for its high-quality products in the fields of electrical engineering and automation technology. Their extensive catalog encompasses everything from connection technology, interface systems, and surge protection to automation software and control technology, making them a versatile choice for various industrial applications. At Powermatic Associates, we deliver Phoenix Contact’s pioneering connectivity and power management solutions, which include terminal blocks, connectors, relays, and PLCs. These components are essential for creating efficient and reliable electrical connections in diverse environments, ensuring seamless system integration. The company's comprehensive range of Industrial Internet of Things (IIoT) solutions facilitates intelligent networking, enabling customers to optimize their automation processes with cutting-edge technology. Phoenix Contact's emphasis on sustainability and innovation reflects in their energy management systems and renewable energy solutions. By incorporating these into your operations, you not only enhance efficiency but also contribute to sustainable practices, aligning with modern environmental standards. Powermatic Associates recognizes the significance of such advancements and partners with Phoenix Contact to provide expert engineering support and tailored solutions, helping you implement smart technologies that drive productivity and minimize costs. With a focus on safety and reliability, Phoenix Contact offers advanced surge protection devices and signal conditioners that safeguard your equipment against voltage spikes and ensure data integrity. In collaboration with Powermatic Associates, customers gain access to robust technical support and consultation, ensuring that every project benefits from personalized guidance and quick resolution of technical challenges. Our partnership extends the reach of Phoenix Contact’s globally recognized industrial automation products, including Human Machine Interfaces (HMIs) and Ethernet switches, empowering businesses with enhanced operational control and communication capabilities. Customers can trust Powermatic Associates to deliver prompt shipping and thorough assistance, ensuring that Phoenix Contact’s top-tier products are seamlessly integrated into their workflows for optimal performance.
Recently viewed products
Relevant products
FAQ
11 in stock
Feed-through terminal block with bolt connection method, cross section: 2.5 - 35 mm², AWG: 12 - 2, width 17 mm, color: gray
Similar products from: Terminal Blocks
What can I help you find today?
