1661037 Phoenix Contact Electrical Connectors

Height46.9 mm

Material-

Length65.4 mm

Drill hole distance, vertical-

Type-

ECLASS 4.027141100

ECLASS 6.027141100

ETIM 6.0EC000897

UNSPSC 12.0139121410

UNSPSC 21.039121410

Drill hole distance, horizontal-

Colorgray

ECLASS 11.027141120

ECLASS 5.127141100

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 20.039121410

Hole diameter-

Flammability rating according to UL 94V0

ECLASS 10.0.127141120

ECLASS 5.027141100

ETIM 3.0EC000901

UNSPSC 7.090139121410

UNSPSC 19.039121410

Width5.2 mm

Note-

Ambient temperature (operation)-

ECLASS 7.027141120

UNSPSC 6.0130211811

UNSPSC 18.039121410

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127141100

ECLASS 9.027141120

ETIM 7.0EC000897

UNSPSC 13.239121410

Conductor cross section solid max.4 mm²

Min. AWG conductor cross section, flexible26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Screw threadM3

Tightening torque max0.6 Nm

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.4 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Max. AWG conductor cross section, flexible12

2 conductors with same cross section, stranded min.0.14 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Permissible humidity (storage/transport)30 % ... 70 %

Conductor cross section AWG max.12

Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²

Internal cylindrical gageA3

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Maximum load current30 A (in case of a 4 mm² con...

Ambient temperature (assembly)-5 °C ... 70 °C

Insulating material groupI

Connection in acc. with standardCSA

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1 mm²

Open side panelYes

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability resultTest passed

Rated surge voltage6 kV

Result of surge voltage testTest passed

Tensile test resultTest passed

Tight fit on carrierNS 35

Conductor cross section short circuit testing4 mm²

Nominal voltage UN500 V

Power frequency withstand voltage setpoint1.89 kV

Bending test turns135

Short-time current0.48 kA

Proof of thermal characteristics (needle flame) effective duration30 s

Degree of pollution3

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Overvoltage categoryIII

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Number of levels1

Result of temperature-rise testTest passed

Result of voltage-drop testTest passed

Number of connections4

Area of applicationRailway industry

End cover width2.2 mm

Back of the hand protectionguaranteed

Potentials1

Insulating materialPA

Nominal cross section2.5 mm²

Acceleration5g

Connection methodScrew connection

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Shock formHalf-sine

Number of shocks per direction3

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Result of power-frequency withstand voltage testTest passed

Test directionsX-, Y- and Z-axis (pos. and ...

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Stripping length9 mm

Oscillation, broadband noise test resultTest passed

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Conductor cross section flexible min.0.14 mm²

Bending test rotation speed10 rpm

Conductor cross section AWG min.26

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Shock test resultTest passed

Shock duration30 ms

Surface flammability NFPA 130 (ASTM E 162)passed

Tightening torque, min0.5 Nm

2 conductors with same cross section, solid min.0.14 mm²

Maximum power dissipation for nominal condition0.77 W

Requirement temperature-rise testIncrease in temperature ≤ 45...

Result of thermal testTest passed

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Nominal current IN24 A

Test duration per axis5 h

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/1555 mm

ETIM 2.0EC000901

ASD level1.857 (m/s2)2/Hz

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

Height7 mm

MaterialPA

Length150 mm

Drill hole distance, vertical32 mm

TypeB24

ECLASS 4.027140800

ECLASS 6.027261200

ETIM 6.0EC002309

UNSPSC 12.0139121408

UNSPSC 21.031261501

Drill hole distance, horizontal130 mm

Colorgray

ECLASS 11.027440201

ECLASS 5.127143400

ETIM 4.0EC000886

UNSPSC 1139121408

UNSPSC 20.031261501

Hole diameter4.5 mm

Flammability rating according to UL 94HB

ECLASS 10.0.127440201

ECLASS 5.027143400

ETIM 3.0EC002309

UNSPSC 7.090139121416

UNSPSC 19.031261501

Width52 mm

NoteFor wall cutouts of type B24

Ambient temperature (operation)-20 °C ... 100 °C

ECLASS 7.027440201

UNSPSC 6.0130211817

UNSPSC 18.031261501

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127140800

ECLASS 9.027440201

ETIM 7.0EC002309

UNSPSC 13.231261501

Conductor cross section solid max.-

Min. AWG conductor cross section, flexible-

2 conductors with same cross section, solid max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum-

Operating temperature-

Screw thread-

Tightening torque max-

Conductor cross section solid min.-

Conductor cross section flexible max.-

Conductor cross section flexible, with ferrule with plastic sleeve min.-

2 conductors with same cross section, stranded max.-

Max. AWG conductor cross section, flexible-

2 conductors with same cross section, stranded min.-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum-

Ambient temperature (actuation)-

Permissible humidity (storage/transport)-

Conductor cross section AWG max.-

Conductor cross section flexible, with ferrule without plastic sleeve max.-

Internal cylindrical gage-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum-

Maximum load current-

Ambient temperature (assembly)-

Insulating material group-

Connection in acc. with standard-

Conductor cross section flexible, with ferrule with plastic sleeve max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum-

Open side panel-

Finger protection-

Result of tight fit on support-

Short circuit stability result-

Rated surge voltage-

Result of surge voltage test-

Tensile test result-

Tight fit on carrier-

Conductor cross section short circuit testing-

Nominal voltage UN-

Power frequency withstand voltage setpoint-

Bending test turns-

Short-time current-

Proof of thermal characteristics (needle flame) effective duration-

Degree of pollution-

Shock protection test specification-

Result of flexion and pull-out test-

Overvoltage category-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Setpoint-

Number of levels-

Result of temperature-rise test-

Result of voltage-drop test-

Number of connections-

Area of application-

End cover width-

Back of the hand protection-

Potentials-

Insulating material-

Nominal cross section-

Acceleration-

Connection method-

Bending test conductor cross section/weight-

Test specification, oscillation, broadband noise-

Shock form-

Number of shocks per direction-

Calorimetric heat release NFPA 130 (ASTM E 1354)-

Result of power-frequency withstand voltage test-

Test directions-

Test specification, shock test-

Specific optical density of smoke NFPA 130 (ASTM E 662)-

Fire protection for rail vehicles (DIN EN 45545-2) R22-

Fire protection for rail vehicles (DIN EN 45545-2) R23-

Height NS 35/7,5-

Stripping length-

Oscillation, broadband noise test result-

Test spectrum-

Relative insulation material temperature index (Elec., UL 746 B)-

Smoke gas toxicity NFPA 130 (SMP 800C)-

Conductor cross section flexible min.-

Bending test rotation speed-

Conductor cross section AWG min.-

Conductor cross section flexible, with ferrule without plastic sleeve min.-

Shock test result-

Shock duration-

Surface flammability NFPA 130 (ASTM E 162)-

Tightening torque, min-

2 conductors with same cross section, solid min.-

Maximum power dissipation for nominal condition-

Requirement temperature-rise test-

Result of thermal test-

Test frequency-

Static insulating material application in cold-

Fire protection for rail vehicles (DIN EN 45545-2) R26-

Nominal current IN-

Test duration per axis-

Fire protection for rail vehicles (DIN EN 45545-2) R24-

Height NS 35/15-

ETIM 2.0-

ASD level-

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))-

Ambient temperature (storage/transport)-

Height46.9 mm

Material-

Length47.7 mm

Drill hole distance, vertical-

Type-

ECLASS 4.027141100

ECLASS 6.027141100

ETIM 6.0EC000897

UNSPSC 12.0139121410

UNSPSC 21.039121410

Drill hole distance, horizontal-

Colorgray

ECLASS 11.027141120

ECLASS 5.127141100

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 20.039121410

Hole diameter-

Flammability rating according to UL 94V0

ECLASS 10.0.127141120

ECLASS 5.027141100

ETIM 3.0EC000897

UNSPSC 7.090139121410

UNSPSC 19.039121410

Width6.2 mm

NoteNote: Product releases, conn...

Ambient temperature (operation)-

ECLASS 7.027141120

UNSPSC 6.0130211811

UNSPSC 18.039121410

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127141100

ECLASS 9.027141120

ETIM 7.0EC000897

UNSPSC 13.239121410

Conductor cross section solid max.6 mm²

Min. AWG conductor cross section, flexible26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Screw threadM3

Tightening torque max0.8 Nm

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.6 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Max. AWG conductor cross section, flexible10

2 conductors with same cross section, stranded min.0.14 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Permissible humidity (storage/transport)30 % ... 70 %

Conductor cross section AWG max.10

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

Internal cylindrical gageA4

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Maximum load current41 A (with 6 mm² conductor c...

Ambient temperature (assembly)-5 °C ... 70 °C

Insulating material groupI

Connection in acc. with standardCSA

Conductor cross section flexible, with ferrule with plastic sleeve max.4 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum2.5 mm²

Open side panelYes

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability resultTest passed

Rated surge voltage8 kV

Result of surge voltage testTest passed

Tensile test resultTest passed

Tight fit on carrierNS 35

Conductor cross section short circuit testing6 mm²

Nominal voltage UN1000 V

Power frequency withstand voltage setpoint2.2 kV

Bending test turns135

Short-time current0.72 kA

Proof of thermal characteristics (needle flame) effective duration30 s

Degree of pollution3

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Overvoltage categoryIII

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Number of levels1

Result of temperature-rise testTest passed

Result of voltage-drop testTest passed

Number of connections2

Area of applicationRailway industry

End cover width2.2 mm

Back of the hand protectionguaranteed

Potentials1

Insulating materialPA

Nominal cross section4 mm²

Acceleration5g

Connection methodScrew connection

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Shock formHalf-sine

Number of shocks per direction3

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Result of power-frequency withstand voltage testTest passed

Test directionsX-, Y- and Z-axis (pos. and ...

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Stripping length9 mm

Oscillation, broadband noise test resultTest passed

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Conductor cross section flexible min.0.14 mm²

Bending test rotation speed10 rpm

Conductor cross section AWG min.26

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Shock test resultTest passed

Shock duration30 ms

Surface flammability NFPA 130 (ASTM E 162)passed

Tightening torque, min0.6 Nm

2 conductors with same cross section, solid min.0.14 mm²

Maximum power dissipation for nominal condition1.02 W

Requirement temperature-rise testIncrease in temperature ≤ 45...

Result of thermal testTest passed

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Nominal current IN32 A (with 4 mm² conductor c...

Test duration per axis5 h

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/1555 mm

ETIM 2.0EC000897

ASD level1.857 (m/s2)2/Hz

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

Height46.9 mm

Material-

Length65.4 mm

Drill hole distance, vertical-

Type-

ECLASS 4.027141100

ECLASS 6.027141100

ETIM 6.0EC000897

UNSPSC 12.0139121410

UNSPSC 21.039121410

Drill hole distance, horizontal-

Colorgray

ECLASS 11.027141120

ECLASS 5.127141100

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 20.039121410

Hole diameter-

Flammability rating according to UL 94V0

ECLASS 10.0.127141120

ECLASS 5.027141100

ETIM 3.0EC000901

UNSPSC 7.090139121410

UNSPSC 19.039121410

Width5.2 mm

Note-

Ambient temperature (operation)-

ECLASS 7.027141120

UNSPSC 6.0130211811

UNSPSC 18.039121410

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127141100

ECLASS 9.027141120

ETIM 7.0EC000897

UNSPSC 13.239121410

Conductor cross section solid max.4 mm²

Min. AWG conductor cross section, flexible26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Screw threadM3

Tightening torque max0.6 Nm

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.4 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Max. AWG conductor cross section, flexible12

2 conductors with same cross section, stranded min.0.14 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Permissible humidity (storage/transport)30 % ... 70 %

Conductor cross section AWG max.12

Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²

Internal cylindrical gageA3

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Maximum load current30 A (in case of a 4 mm² con...

Ambient temperature (assembly)-5 °C ... 70 °C

Insulating material groupI

Connection in acc. with standardCSA

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1 mm²

Open side panelYes

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability resultTest passed

Rated surge voltage6 kV

Result of surge voltage testTest passed

Tensile test resultTest passed

Tight fit on carrierNS 35

Conductor cross section short circuit testing4 mm²

Nominal voltage UN500 V

Power frequency withstand voltage setpoint1.89 kV

Bending test turns135

Short-time current0.48 kA

Proof of thermal characteristics (needle flame) effective duration30 s

Degree of pollution3

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Overvoltage categoryIII

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Number of levels1

Result of temperature-rise testTest passed

Result of voltage-drop testTest passed

Number of connections4

Area of applicationRailway industry

End cover width2.2 mm

Back of the hand protectionguaranteed

Potentials1

Insulating materialPA

Nominal cross section2.5 mm²

Acceleration5g

Connection methodScrew connection

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Shock formHalf-sine

Number of shocks per direction3

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Result of power-frequency withstand voltage testTest passed

Test directionsX-, Y- and Z-axis (pos. and ...

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Stripping length9 mm

Oscillation, broadband noise test resultTest passed

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Conductor cross section flexible min.0.14 mm²

Bending test rotation speed10 rpm

Conductor cross section AWG min.26

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Shock test resultTest passed

Shock duration30 ms

Surface flammability NFPA 130 (ASTM E 162)passed

Tightening torque, min0.5 Nm

2 conductors with same cross section, solid min.0.14 mm²

Maximum power dissipation for nominal condition0.77 W

Requirement temperature-rise testIncrease in temperature ≤ 45...

Result of thermal testTest passed

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Nominal current IN24 A

Test duration per axis5 h

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/1555 mm

ETIM 2.0EC000901

ASD level1.857 (m/s2)2/Hz

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

Height7 mm

MaterialPA

Length150 mm

Drill hole distance, vertical32 mm

TypeB24

ECLASS 4.027140800

ECLASS 6.027261200

ETIM 6.0EC002309

UNSPSC 12.0139121408

UNSPSC 21.031261501

Drill hole distance, horizontal130 mm

Colorgray

ECLASS 11.027440201

ECLASS 5.127143400

ETIM 4.0EC000886

UNSPSC 1139121408

UNSPSC 20.031261501

Hole diameter4.5 mm

Flammability rating according to UL 94HB

ECLASS 10.0.127440201

ECLASS 5.027143400

ETIM 3.0EC002309

UNSPSC 7.090139121416

UNSPSC 19.031261501

Width52 mm

NoteFor wall cutouts of type B24

Ambient temperature (operation)-20 °C ... 100 °C

ECLASS 7.027440201

UNSPSC 6.0130211817

UNSPSC 18.031261501

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127140800

ECLASS 9.027440201

ETIM 7.0EC002309

UNSPSC 13.231261501

Conductor cross section solid max.-

Min. AWG conductor cross section, flexible-

2 conductors with same cross section, solid max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum-

Operating temperature-

Screw thread-

Tightening torque max-

Conductor cross section solid min.-

Conductor cross section flexible max.-

Conductor cross section flexible, with ferrule with plastic sleeve min.-

2 conductors with same cross section, stranded max.-

Max. AWG conductor cross section, flexible-

2 conductors with same cross section, stranded min.-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum-

Ambient temperature (actuation)-

Permissible humidity (storage/transport)-

Conductor cross section AWG max.-

Conductor cross section flexible, with ferrule without plastic sleeve max.-

Internal cylindrical gage-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum-

Maximum load current-

Ambient temperature (assembly)-

Insulating material group-

Connection in acc. with standard-

Conductor cross section flexible, with ferrule with plastic sleeve max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum-

Open side panel-

Finger protection-

Result of tight fit on support-

Short circuit stability result-

Rated surge voltage-

Result of surge voltage test-

Tensile test result-

Tight fit on carrier-

Conductor cross section short circuit testing-

Nominal voltage UN-

Power frequency withstand voltage setpoint-

Bending test turns-

Short-time current-

Proof of thermal characteristics (needle flame) effective duration-

Degree of pollution-

Shock protection test specification-

Result of flexion and pull-out test-

Overvoltage category-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Setpoint-

Number of levels-

Result of temperature-rise test-

Result of voltage-drop test-

Number of connections-

Area of application-

End cover width-

Back of the hand protection-

Potentials-

Insulating material-

Nominal cross section-

Acceleration-

Connection method-

Bending test conductor cross section/weight-

Test specification, oscillation, broadband noise-

Shock form-

Number of shocks per direction-

Calorimetric heat release NFPA 130 (ASTM E 1354)-

Result of power-frequency withstand voltage test-

Test directions-

Test specification, shock test-

Specific optical density of smoke NFPA 130 (ASTM E 662)-

Fire protection for rail vehicles (DIN EN 45545-2) R22-

Fire protection for rail vehicles (DIN EN 45545-2) R23-

Height NS 35/7,5-

Stripping length-

Oscillation, broadband noise test result-

Test spectrum-

Relative insulation material temperature index (Elec., UL 746 B)-

Smoke gas toxicity NFPA 130 (SMP 800C)-

Conductor cross section flexible min.-

Bending test rotation speed-

Conductor cross section AWG min.-

Conductor cross section flexible, with ferrule without plastic sleeve min.-

Shock test result-

Shock duration-

Surface flammability NFPA 130 (ASTM E 162)-

Tightening torque, min-

2 conductors with same cross section, solid min.-

Maximum power dissipation for nominal condition-

Requirement temperature-rise test-

Result of thermal test-

Test frequency-

Static insulating material application in cold-

Fire protection for rail vehicles (DIN EN 45545-2) R26-

Nominal current IN-

Test duration per axis-

Fire protection for rail vehicles (DIN EN 45545-2) R24-

Height NS 35/15-

ETIM 2.0-

ASD level-

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))-

Ambient temperature (storage/transport)-