3058127 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Rated surge voltage
  8 kV
• Degree of pollution
  3
• Power frequency withstand voltage setpoint
  2 kV
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• ASD level
  1.857 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• End cover width
  2.2 mm
• Height NS 32
  52.1 mm
• Max. cross section for cable lug connection
  2.5 mm²
• Hole diameter, min.
  4.3 mm
• Tightening torque, min
  1.2 Nm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Number of connections
  2
• Insulating material group
  I
• Nominal current IN
  32 A
Result of surge voltage test
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
53.3 mm
Connection
1 level
Cable lug connection according to standard
DIN 46237:1970-07
Min. cross section for cable lug connection
0.5 mm²
Cable lug width, max.
8 mm
Tightening torque max
1.4 Nm
ECLASS 4.0
27141100
Color
gray
Overvoltage category
III
Maximum power dissipation for nominal condition
1.02 W
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.1 mm
Connection method
Bolt connection
Number of levels
1
Insulating material
PA
Maximum load current
32 A
Open side panel
Yes
Tight fit on carrier
NS 35/NS 32
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Pitch
9 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
AWG max
10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Potentials
1
Flammability rating according to UL 94
V0
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
9 mm
Height NS 35/15
54.6 mm
Connection in acc. with standard
CUL
AWG min
26
Screw thread
M4
Bolt diameter
4 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 19.0
39121410
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410