3031445 Phoenix Contact Terminal Blocks
Part#:3031445
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 578
Sep 28, 2024
Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, connection method: Spring-cage connection, number of connections: 4, cross section: 0.08 mm² - 6 mm², AWG: 28 - 10, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Powermatic Associates site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3031445 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Overvoltage category III
- Degree of pollution 3
- Nominal cross section 4 mm²
- Maximum load current 40 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
- Finger protection guaranteed
- ETIM 7.0 EC000897
- Number of levels 1
- Insulating material PA
- Area of application Railway industry
- Back of the hand protection guaranteed
- Nominal voltage UN 800 V
- Number of connections 4
- Color gray
- Flammability rating according to UL 94 V0
- Insulating material group I
- Open side panel Yes
- Power frequency withstand voltage setpoint 2 kV
- Bending test conductor cross section/weight 0.08 mm² / 0.1 kg
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Oscillation, broadband noise test result Test passed
- Test duration per axis 5 h
- Shock form Half-sine
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Height NS 35/15 44 mm
- Conductor cross section short circuit testing 6 mm²
- Result of thermal test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Length 87 mm
- Nominal current IN 32 A (with 6 mm² conductor cross section)
- Result of power-frequency withstand voltage test Test passed
- Bending test rotation speed 10 rpm
- Tensile test result Test passed
- Setpoint 1 N
- Short-time current 0.72 kA
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- End cover width 2.2 mm
- Connection 1 level
- Conductor cross section solid min. 0.08 mm²
- Conductor cross section AWG max. 10
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Potentials 1
- Rated surge voltage 8 kV
- Maximum power dissipation for nominal condition 1.02 W
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of surge voltage test Test passed
- Bending test turns 135
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Acceleration 30g
- Shock duration 18 ms
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Result of flexion and pull-out test Test passed
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Result of aging test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Connection in acc. with standard CSA
- Min. AWG conductor cross section, flexible 28
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 5.1 27141100
- ECLASS 6.0 27141100
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 19.0 39121410
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tight fit on carrier NS 35
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Ageing test for screwless modular terminal block temperature cycles 192
- Shock test result Test passed
- Static insulating material application in cold -60 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Width 6.2 mm
- Height NS 35/7,5 36.5 mm
- Stripping length 8 mm ... 10 mm
- Conductor cross section flexible min. 0.08 mm²
- Max. AWG conductor cross section, flexible 12
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 9.0 27141120
- UNSPSC 7.0901 39121410
- Ambient temperature (actuation) -5 °C ... 70 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- UNSPSC 11 39121410
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Conductor cross section AWG min. 28
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- ECLASS 11.0 27141120
- ETIM 3.0 EC000897
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Internal cylindrical gage A4
- ECLASS 4.1 27141100
- ETIM 6.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- ECLASS 4.0 27141100
- Connection method Spring-cage connection
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ETIM 2.0 EC000897
- Conductor cross section solid max. 6 mm²
- ECLASS 10.0.1 27141120
- ECLASS 7.0 27141120
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Get a quick Quote!
Request a quote, and we will send you price within minutes.
Stock:
578
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?