560728 Festo Directional Control Valves

Product Details

• Lap
  Underlap
• Reset method
  Mechanical spring Electrical actuation
• Nominal width
  9 mm
• Degree of protection
  IP65 NEMA 4
• Symbol
  00992252
• Optimized flow rate of pneumatic valve pneumatically concatenated flow
  700 l/min
• Duty cycle
  100%
• Nominal operating voltage DC
  24 V
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Ambient temperature
  -5 °C ... 50 °C
• Product weight
  301 g
• Pilot exhaust air port 82/84
  Optionally: Not ducted
• Note on materials
  RoHS-compliant
• Pneumatic connection 5
  Sub-base, size 26 mm as per ISO 15407-2
• Operating pressure
  -0.9 bar ... 10 bar
• Width
  26 mm
• Type code
  VSVA
• Mounting position
  Any
• Signal status display
  LED
• Flow rate of pneumatic valve on individual sub-base
  700 l/min
Asymmetrical switching time on
19 ms for control side 12 9 ms for control side 14
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
0 - No corrosion stress
Noise level
85 dB(A)
Pneumatic connection 2
Sub-base, size 26 mm as per ISO 15407-2
Material of screws
Steel, galvanized
Valve function
5/3, connection 2 pressurized, 4 exhausted
Actuation type
Electrical
Pneumatic working port
Sub-base, size 26 mm as per ISO 15407-2 G1/4
Standard nominal flow rate
700 l/min
Type of control
Pilot-controlled
Pilot air supply port
External Internal
Asymmetrical switching time off
36 ms for control side 12
Max. negative test pulse on 1 signal
1100 µs
Permissible voltage fluctuations
+/- 10 %
Temperature of medium
-5 °C ... 50 °C
Relative air humidity
0 - 90 %
Pilot air port 12/14
Sub-base, size 26 mm as per ISO 15407-2
Pneumatic connection 3
Sub-base, size 26 mm as per ISO 15407-2
Seals material
FPM NBR
Operating voltage
24V DC
Exhaust air function
With flow control option Via individual sub-base
Manual override
Detenting Covered
Flow rate of pneumatic valve
700 l/min
Optimized flow rate of pneumatic valve, pneumatically concatenated flow
700 l/min
Coil characteristics
24 V DC: 1.6 W
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Max. tightening torque for valve mounting
1.8 Nm ... 2.2 Nm
Electrical connection
4-pin as per ISO 15407-2
Pneumatic connection 1
Sub-base, size 26 mm as per ISO 15407-2
Pilot pressure MPa
0.3 MPa ... 1 MPa
Design
Piston gate valve
Certification
CSA (OL) c UL us - Recognized (OL)
Sealing principle
Soft
Flow direction
Any
Pilot pressure
3 bar ... 10 bar
Max. positive test pulse with 0 signal
1200 µs
Surge resistance
2.5 kV
Contamination level
3
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Type of mounting
On sub-base
Pneumatic connection 4
Sub-base, size 26 mm as per ISO 15407-2
Housing material
Die-cast aluminum PA

560728 Related Documents