547189 Festo Directional Control Valves

Product Details

• Seals material
  HNBR NBR
• Operating pressure
  2 bar ... 10 bar
• Pilot pressure MPa
  0.3 MPa ... 1 MPa
• Operating voltage
  110V AC
• Pneumatic working port
  Sub-base, size 18 mm as per ISO 15407-1 G1/8
• Sealing principle
  Soft
• Type of control
  Pilot-controlled
• Ambient temperature
  -5 °C ... 50 °C
• Auxiliary pilot air port 12
  Sub-base, size 18 mm as per ISO 15407-1
• Pneumatic connection 3
  Sub-base, size 18 mm as per ISO 15407-1
• Actuation type
  Electrical
• Degree of protection
  IP65 NEMA 4
• Manual override
  Non-detenting
• Pilot pressure
  3 bar ... 10 bar
• Duty cycle
  100%
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
• Temperature of medium
  -5 °C ... 50 °C
• Product weight
  174 g
• Pneumatic connection 4
  Sub-base, size 18 mm as per ISO 15407-1
• Housing material
  Die-cast aluminum
Valve function
2x3/2, closed, monostable
Standard nominal flow rate
400 l/min
Nominal width
5 mm
Mounting position
Any
Symbol
00991817
Flow rate of pneumatic valve
600 l/min
Switching time off
21 ms
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
0 - No corrosion stress
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Type of mounting
On sub-base
Pneumatic connection 1
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 5
Sub-base, size 18 mm as per ISO 15407-1
Material of screws
Steel Galvanized
Lap
Overlap
Valve size
18 mm
Design
Piston gate valve
Type code
VSVA
Conforms to standard
ISO 15407-1 VDMA 24563
Flow direction
Non-reversible
Signal status display
LED
Optimized flow rate of pneumatic valve pneumatically concatenated flow
400 l/min
On switching time
13 ms
Permissible voltage fluctuations
-15 % / +10 %
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Noise level
85 dB(A)
Electrical connection
Form C as per DIN EN 175301-803
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Pilot interface
as per ISO 15218
Reset method
Pneumatic spring
Exhaust air function
With flow control option
Pilot air supply port
External
Flow rate of pneumatic valve on individual sub-base
450 l/min
Coil characteristics
110 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
CE marking (see declaration of conformity)
As per EU low voltage directive
Relative air humidity
0 - 90 %
Max. tightening torque for valve mounting
1 Nm
Auxiliary pilot air port 14
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 2
Sub-base, size 18 mm as per ISO 15407-1
Note on materials
RoHS-compliant

547189 Related Documents