547187 Festo Directional Control Valves

Product Details

• Signal status display
  LED
• On switching time
  18 ms
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
• Relative air humidity
  0 - 90 %
• Ambient temperature
  -5 °C ... 50 °C
• Type of mounting
  On sub-base
• Pilot exhaust air port 82/84
  Not ducted as per standard Ducted
• Pneumatic connection 4
  Sub-base, size 18 mm as per ISO 15407-1
• Seals material
  HNBR NBR
• Valve function
  5/3, closed
• Actuation type
  Electrical
• Reset method
  Mechanical spring
• Nominal width
  5 mm
• Mounting position
  Any
• Flow rate of pneumatic valve on individual sub-base
  500 l/min
• Duty cycle
  100%
• CE marking (see declaration of conformity)
  As per EU low voltage directive
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Temperature of medium
  -5 °C ... 50 °C
• Auxiliary pilot air port 12
  Sub-base, size 18 mm as per ISO 15407-1
Operating pressure
3 bar ... 10 bar
Standard nominal flow rate
450 l/min
Pneumatic working port
Sub-base, size 18 mm as per ISO 15407-1 G1/8
Exhaust air function
With flow control option
Manual override
Non-detenting
Pilot air supply port
Internal
Symbol
00991080
Optimized flow rate of pneumatic valve pneumatically concatenated flow
450 l/min
Permissible voltage fluctuations
-15 % / +10 %
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Electrical connection
Form C as per DIN EN 175301-803
Pneumatic connection 1
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 5
Sub-base, size 18 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Pilot pressure MPa
0.3 MPa ... 1 MPa
Design
Piston gate valve
Degree of protection
IP65 NEMA 4
Sealing principle
Soft
Type of control
Pilot-controlled
Flow rate of pneumatic valve
650 l/min
Changeover time
20 ms
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Noise level
85 dB(A)
Product weight
174 g
Pneumatic connection 3
Sub-base, size 18 mm as per ISO 15407-1
Material of screws
Steel Galvanized
Lap
Overlap
Valve size
18 mm
Operating voltage
110V AC
Type code
VSVA
Conforms to standard
ISO 15407-1 VDMA 24563
Flow direction
Non-reversible
Pilot pressure
3 bar ... 10 bar
Switching time off
30 ms
Coil characteristics
110 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. tightening torque for valve mounting
1 Nm
Auxiliary pilot air port 14
Sub-base, size 18 mm as per ISO 15407-1
Housing material
Die-cast aluminum
Pneumatic connection 2
Sub-base, size 18 mm as per ISO 15407-1
Pilot interface
as per ISO 15218

547187 Related Documents