SB12TANR Banner Proximity Sensors

Name: SB12TANR
Brand: Banner
Price: 38 USD
Availability: InStock

Part#:SB12TANR

Manufacturer:Banner

Alt. Part#:11148

Product Lifecycle:Active

In-stock parts: 32

Nov 16, 2024

SB12 Threaded Series Receiver; Range: 1.5 m; Input Voltage: 10-30 V dc; Outputs: L.O. NPN; 2 m (6.5 ft) cable

About the manufacturer: Banner is one of the manufacturers that offers Proximity Sensors that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the SB12TANR Banner price in the box on the right side or send a quick quote.

Product Details

Weight
45.3592 g
Country Of Origin
CN
IO Link
No
DeviceNet
No
Feature: Chemical Resistant
No
Feature: Audible
No
Feature: Hazardous Area
No
Feature: Encapsulated
No
Feature: Timing (Hold/Delay)
No
Opposed Mode Emitter/Receiver
Receiver
Indicator
LEDs
Barrel Diameter (mm)
12
Adjustments
N/A
Lens Material
Polycarbonate
IP Rating
IP67
Number of Pins
3
Max Op. Relative Humidity [%]
90% @ 50°C
Repeatability (µs)
350
Delay at Power-up (ms)
1000
Special Feature: Water Detection
No

Special Feature: Remote Teach

Special Feature: Intrinsically Safe

Max Op. Temp. (°C)

Power Supply/Supply Voltage

10-30 V dc

Output response time (ms)

2.5 ON/1.75 OFF

Quick Disconnect Type

No QD

Operation

Light Operate

Connection

Cable

Min Op. Temp. (°C)

-20

Outputs

NPN

Housing Style

Barrel

Cable Length (m)

Sensing Mode (General)

Opposed

Max Sensing Distance (mm)

1500

Sensing Mode (Detailed)

Receiver

Input/Output

Discrete

Primary Housing Material

Thermoplastic

Sensing Beam

Infrared LED

Power

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

SB12TANR Description

Banner Engineering SB12TANR is a photo-electric sensor designed for through-beam system applications, part of the SB12 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a 12mm diameter and comes pre-wired with a 6.5ft / 2m cable terminated with bare end flying leads. The SB12TANR operates on a supply voltage range of 10Vdc to 30Vdc, with nominal voltages of 12Vdc and 24Vdc. It is designed for snap-in flush mounting in panels up to 3mm thick and can operate in ambient air temperatures ranging from -20 to +50 degrees Celsius. This sensor offers an IP67 degree of protection, making it suitable for various industrial environments. Its shape is an M12 cylindrical threaded/barrel, and it includes 1 x digital output (NPN transistor) with a sensing distance of 1.5m. The SB12TANR utilizes infrared light, has a response time of 2.5ms / 0.0025 s, and operates in Light-ON mode, with a thread size of M12.

$38.00

Stock:

Select Qty:

$38.00

$38.00 each

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

SB12TE1

Verified stock: 34

SB12 Threaded Series Emitter; Range: 1.5 m; Input Voltage: 10-30 V dc; Output: Not Applicable; 2 m (6.5 ft) cable

Banner

SB12E1-10747

Verified stock: 11

DISCONTINUED, USE STD SB12E1 FOR GUNNEBO

Banner

SMB46U

Verified stock: 0

Bracket: U; Material: 14 Gauge 316 Stainless Steel

Banner

BWA-QD5.5

Verified stock: 0

5-pin M12 Prewired; 1/2-14 in NBSM

Banner

S15LYGPQ

Verified stock: 0

S15L Series: 2-Color In-Line Sensor Status Indicator; Voltage: 10-30 V dc; Housing: Polyurethane; IP67; Input: PNP; Colors: Yellow Green; Male-Female 4-pin M12 Integral QD

Banner

What can I help you find today?

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

MQDC1-506

Cordset: Single Ended A-Code M12; 5-pin Straight Female Connector; 2 m (6.56 ft) Black PVC Jacket; Nickel-Plated Brass Coupling Nut

Banner

184