QS30EXH2OQ5

Banner

Product Lifecycle: Active

Banner Engineering QS30EXH2OQ5 is a photo-electric sensor designed for water detection applications, featuring an emitter alone configuration. It employs a through-beam system in an opposed mode, specifically tailored for the QS30H2O series. This sensor is equipped with an M30 threaded mount for installation and comes pre-wired with a 6-inch (150mm) pigtail that terminates with a 5-pin Euro-style M12 connector. It operates within an ambient air temperature range of -20 to +60 degrees Celsius and offers a sensing distance of 4 meters. The QS30EXH2OQ5 is constructed with a thermoplastic housing and an acrylic lens, ensuring durability. It is protected to IP67 NEMA PW12 standards, making it suitable for challenging environments. The sensor operates on a supply voltage of 10Vdc to 30Vdc, with nominal values of 12Vdc and 24Vdc. It emits infrared (IR) light and boasts a rapid response time of 1ms (0.001 seconds), ensuring quick detection capabilities.

QS30EXH2OQ5

Banner Engineering QS30EXH2OQ5 is a photo-electric sensor designed for water detection applications, featuring an emitter alone configuration. It employs a through-beam system in an opposed mode, specifically tailored for the QS30H2O series. This sensor is equipped with an M30 threaded mount for installation and comes pre-wired with a 6-inch (150mm) pigtail that terminates with a 5-pin Euro-style M12 connector. It operates within an ambient air temperature range of -20 to +60 degrees Celsius and offers a sensing distance of 4 meters. The QS30EXH2OQ5 is constructed with a thermoplastic housing and an acrylic lens, ensuring durability. It is protected to IP67 NEMA PW12 standards, making it suitable for challenging environments. The sensor operates on a supply voltage of 10Vdc to 30Vdc, with nominal values of 12Vdc and 24Vdc. It emits infrared (IR) light and boasts a rapid response time of 1ms (0.001 seconds), ensuring quick detection capabilities.

WORLD-BEAM QS30H2O Water Sensor.pdf

Product details

WORLD-BEAM QS30H2O Water Sensor.pdf

IO LinkNo
DeviceNetNo
Feature: Chemical ResistantNo
Feature: Hazardous AreaNo
Feature: AudibleNo
Feature: EncapsulatedYes

Feature: Timing (Hold/Delay)No

Opposed Mode Emitter/ReceiverEmitter

IndicatorLEDs

Barrel Diameter (mm)30

AdjustmentsN/A

NEMA RatingNEMA PW12

Lens MaterialAcrylic

Max Op. Relative Humidity [%]95% @ 50°C

IP RatingIP67

Number of Pins5

Special Feature: Remote TeachNo

Special Feature: Water DetectionYes

Repeatability (µs)500

Delay at Power-up (ms)100

Min Op. Temp. (°C)-20

Output response time (ms)1

Special Feature: Intrinsically SafeNo

Max Op. Temp. (°C)60

OperationN/A

Quick Disconnect TypeM12 (Euro)

Primary Housing MaterialThermoplastic

ConnectionPigtail QD

Power Supply/Supply Voltage10-30 V dc

OutputsN/A

Max Sensing Distance (mm)4000

PowerDC

Housing StyleRectangular w/M30 Mount

Sensing Mode (General)Opposed

Sensing BeamLong Infrared (Water Detection)

Sensing Mode (Detailed)Emitter

Product series / family nameWORLD-BEAM series

FunctionsPhoto-electric emitter green LED (power ON) yellow LED (output state)

Degree of protectionIP67 NEMA PW12

Sub-range nameQS30H2O series

Light ColorInfrared (IR)

Mounting modeThreaded mount

Compliant with standard(s)CE

ShapeRectangular

Response time1ms / 0.001 s

Order code / Manufacturer SKU79166

Primary brandBanner Engineering

Supply voltage (DC)10Vdc-30Vdc (12Vdc / 24Vdc nom.)

Materialthermoplastic housing Acrylic lns.

Thread sizeM30

Ambient air temperature for operation-20...+60 °C

Main functionSensor (Photo-electric)

Connection typePre-wired with 6" / 150mm pigtail terminated with 5-pin Euro-style M12 connector

Designthrough-beam system / opposed mode water detection

Get a quick quote

Select Qty:

Average response time:

11 minutes

This part can ship within 24h!

Fast worldwide Shipping and Delivery

Shipping cost will be calculated during checkout

Payments methods

Secure Payment Processing
with money back guarantee

1 year warranty on all parts

Responsive Customer Support
with personalized assistance

Need more details?

Feel free to chat with us.

Relevant products

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

This item can ship within 24h!

QS30LD-79194

Banner Engineering QS30LD-79194 is a Class 1 laser photo-electric sensor designed for a variety of detection applications. It features a diffuse mode with TEACH mode functionality and is equipped with an M30 threaded mount for secure installation. This sensor operates within an ambient air temperature range of -10 to +50°C and is housed in a thermoplastic casing with an acrylic lens, ensuring durability. It comes pre-wired with a 60" / 1.5m pigtail that terminates with a 4-pin Pico-style M8 connector for easy connection. As part of the QS30 Diffuse-mode Laser sensors series, it offers a sensing distance of 400mm and emits a visible red light with a wavelength of 650 nm. The QS30LD-79194 supports both Light-ON and Dark-ON operating modes and provides a single digital output (PNP/NPN transistor) with a rapid response time of 0.225ms / 0.000225 s. It requires a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and is protected to IP67 NEMA 6 standards, making it suitable for challenging environments.

BT13S

Banner Engineering BT13S, part of the Glass fiber series, is a fiber optic sensor designed with a diffuse-reflective system and bifurcated fiber in-line sensing. It features a brass sensing end, glass fiber, and a stainless steel monocoil construction. The sensor has a 1.6mm fiber core diameter and comes in a cylindrical shape with a threaded end tip. It measures 3ft or 910mm in length. This sensor is capable of operating in ambient air temperatures up to +249°C.

QDE2R4-825D

Banner Engineering QDE2R4-825D is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.5mm diameter PVC cable and a 5-pin Euro-style M12 male connector to bare end flying leads. This cable operates effectively within an ambient air temperature range of -40 to +105°C. It offers a degree of protection rated at IP67, making it suitable for environments where dust and water resistance are necessary. The cable is sheathed in yellow, measures 7.62 meters in length, and is rated for 75Vdc and 60Vac, accommodating a broad range of electrical requirements.

QS18VP6LAFQ5

Banner Engineering QS18VP6LAFQ5 is an adjustable-field Class 1 laser photo-electric sensor designed for precise detection tasks. It operates within an ambient air temperature range of -10 to +50°C and features a background suppression system with screw adjustment for fine-tuning. This sensor is equipped with a pre-wired 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector, falling under the QS18..AF mechanically adjustable background suppression series. It boasts a degree of protection rated at IP67 NEMA 6, ensuring durability in various environments. The supply voltage requirement is 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Its rectangular shape is constructed from a thermoplastic housing with an acrylic lens, and it has a sensing distance range of 30 to 150mm. The sensor emits a visible red light at a wavelength of 650 nm and offers an operating mode that includes both Light-ON and Dark-ON options. Additionally, it features 1 x digital output (PNP transistor; complementary NO/NC) for versatile connectivity.

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

This item can ship within 24h!

QS30LD-79194

Banner Engineering QS30LD-79194 is a Class 1 laser photo-electric sensor designed for a variety of detection applications. It features a diffuse mode with TEACH mode functionality and is equipped with an M30 threaded mount for secure installation. This sensor operates within an ambient air temperature range of -10 to +50°C and is housed in a thermoplastic casing with an acrylic lens, ensuring durability. It comes pre-wired with a 60" / 1.5m pigtail that terminates with a 4-pin Pico-style M8 connector for easy connection. As part of the QS30 Diffuse-mode Laser sensors series, it offers a sensing distance of 400mm and emits a visible red light with a wavelength of 650 nm. The QS30LD-79194 supports both Light-ON and Dark-ON operating modes and provides a single digital output (PNP/NPN transistor) with a rapid response time of 0.225ms / 0.000225 s. It requires a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and is protected to IP67 NEMA 6 standards, making it suitable for challenging environments.

BT13S

Banner Engineering BT13S, part of the Glass fiber series, is a fiber optic sensor designed with a diffuse-reflective system and bifurcated fiber in-line sensing. It features a brass sensing end, glass fiber, and a stainless steel monocoil construction. The sensor has a 1.6mm fiber core diameter and comes in a cylindrical shape with a threaded end tip. It measures 3ft or 910mm in length. This sensor is capable of operating in ambient air temperatures up to +249°C.

QDE2R4-825D

Banner Engineering QDE2R4-825D is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.5mm diameter PVC cable and a 5-pin Euro-style M12 male connector to bare end flying leads. This cable operates effectively within an ambient air temperature range of -40 to +105°C. It offers a degree of protection rated at IP67, making it suitable for environments where dust and water resistance are necessary. The cable is sheathed in yellow, measures 7.62 meters in length, and is rated for 75Vdc and 60Vac, accommodating a broad range of electrical requirements.

QS18VP6LAFQ5

Banner Engineering QS18VP6LAFQ5 is an adjustable-field Class 1 laser photo-electric sensor designed for precise detection tasks. It operates within an ambient air temperature range of -10 to +50°C and features a background suppression system with screw adjustment for fine-tuning. This sensor is equipped with a pre-wired 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector, falling under the QS18..AF mechanically adjustable background suppression series. It boasts a degree of protection rated at IP67 NEMA 6, ensuring durability in various environments. The supply voltage requirement is 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Its rectangular shape is constructed from a thermoplastic housing with an acrylic lens, and it has a sensing distance range of 30 to 150mm. The sensor emits a visible red light at a wavelength of 650 nm and offers an operating mode that includes both Light-ON and Dark-ON options. Additionally, it features 1 x digital output (PNP transistor; complementary NO/NC) for versatile connectivity.

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

Friendly Powermatic robot

What can I help you find today?