3045088 Phoenix Contact Terminal Blocks
Part#:3045088
Manufacturer:Phoenix Contact
Category:Terminal Blocks
Product Lifecycle:Active
Mar 15, 2025
Product description
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 24 A, connection method: Screw connection, number of connections: 2, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: black, mounting type: NS 35/7,5, NS 35/15
Product Details
- Surface flammability NFPA 130 (ASTM E 162) passed
- Number of levels 1
- Insulating material PA
- Maximum power dissipation for nominal condition 0.77 W
- Nominal voltage UN 1000 V
- Open side panel Yes
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Power frequency withstand voltage setpoint 2.2 kV
- Tight fit on carrier NS 35
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of thermal test Test passed
- Conductor cross section short circuit testing 4 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.1 27141100
- ETIM 7.0 EC000897
- Connection in acc. with standard CSA
- Conductor cross section flexible min. 0.14 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- UNSPSC 7.0901 39121410
- UNSPSC 11 39121410
- Nominal cross section 2.5 mm²
- Flammability rating according to UL 94 V0
- Maximum load current 32 A (with 4 mm² conductor cross section)
- Nominal current IN 24 A
- Bending test turns 135
- Conductor cross section solid min. 0.14 mm²
- ECLASS 5.1 27141100
- ETIM 4.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally Friendly Use Period = 50 years
- Color black
- Rated surge voltage 8 kV
- Back of the hand protection guaranteed
- Result of flexion and pull-out test Test passed
- Result of voltage-drop test Test passed
- Max. AWG conductor cross section, flexible 12
- Conductor cross section AWG max. 12
- ETIM 6.0 EC000897
- UNSPSC 20.0 39121410
- Shock form Half-sine
- Conductor cross section AWG min. 26
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- 2 conductors with same cross section, solid max. 1.5 mm²
- Potentials 1
- Area of application Railway industry
- Degree of pollution 3
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Finger protection guaranteed
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 10.0.1 27141120
- ECLASS 6.0 27141100
- ETIM 3.0 EC000897
- Number of connections 2
- Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
- Conductor cross section solid max. 4 mm²
- Min. AWG conductor cross section, flexible 26
- 2 conductors with same cross section, stranded min. 0.14 mm²
- 2 conductors with same cross section, solid min. 0.14 mm²
- Internal cylindrical gage A3
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 5.0 27141100
- ECLASS 9.0 27141120
- UNSPSC 19.0 39121410
- Conductor cross section flexible max. 2.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- 2 conductors with same cross section, stranded max. 1.5 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.14 mm²
- ECLASS 11.0 27141120
- ECLASS 7.0 27141120
- ETIM 2.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- Insulating material group I
- Bending test rotation speed 10 rpm
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Test spectrum Service life test category 1, class B, body mounted
- Acceleration 5g
- Shock duration 30 ms
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Height NS 35/15 55 mm
- End cover width 2.2 mm
- Tightening torque max 0.6 Nm
- Short circuit stability result Test passed
- Oscillation, broadband noise test result Test passed
- Shock test result Test passed
- Test duration per axis 5 h
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Connection method Screw connection
- Stripping length 9 mm
- Overvoltage category III
- Result of power-frequency withstand voltage test Test passed
- Tensile test result Test passed
- Short-time current 0.48 kA
- ASD level 1.857 (m/s2)2/Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Length 47.7 mm
- Tightening torque, min 0.5 Nm
- UNSPSC 12.01 39121410
- Result of surge voltage test Test passed
- Result of tight fit on support Test passed
- Setpoint 1 N
- Result of temperature-rise test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 5.2 mm
- Height NS 35/7,5 47.5 mm
- Screw thread M3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
3045088 Phoenix Contact
Get a quick Quote!
Request a quote, and we will send you price within minutes.
Stock:
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 3045088 with other products
Surface flammability NFPA...
Number of levels
Insulating material
Maximum power dissipation...
Nominal voltage UN
Open side panel
Result of the test for me...
Power frequency withstand...
Tight fit on carrier
Requirement temperature-r...
Result of thermal test
Conductor cross section s...
Operating temperature
Ambient temperature (actu...
ECLASS 4.1
ETIM 7.0
Connection in acc. with s...
Conductor cross section f...
Conductor cross section f...
Two conductors with the s...
UNSPSC 7.0901
UNSPSC 11
Nominal cross section
Flammability rating accor...
Maximum load current
Nominal current IN
Bending test turns
Conductor cross section s...
ECLASS 5.1
ETIM 4.0
UNSPSC 13.2
UNSPSC 21.0
Conductor cross section f...
Two conductors with the s...
Permissible humidity (sto...
China RoHS
Color
Rated surge voltage
Back of the hand protecti...
Result of flexion and pul...
Result of voltage-drop te...
Max. AWG conductor cross ...
Conductor cross section A...
ETIM 6.0
UNSPSC 20.0
Shock form
Conductor cross section A...
Conductor cross section f...
2 conductors with same cr...
Potentials
Area of application
Degree of pollution
Shock protection test spe...
Finger protection
Two conductors with the s...
Ambient temperature (stor...
ECLASS 10.0.1
ECLASS 6.0
ETIM 3.0
Number of connections
Note
Conductor cross section s...
Min. AWG conductor cross ...
2 conductors with same cr...
2 conductors with same cr...
Internal cylindrical gage
Ambient temperature (asse...
ECLASS 4.0
ECLASS 5.0
ECLASS 9.0
UNSPSC 19.0
Conductor cross section f...
Conductor cross section f...
2 conductors with same cr...
Two conductors with the s...
ECLASS 11.0
ECLASS 7.0
ETIM 2.0
UNSPSC 6.01
UNSPSC 18.0
Insulating material group
Bending test rotation spe...
Bending test conductor cr...
Test frequency
Test spectrum
Acceleration
Shock duration
Temperature index of insu...
Height NS 35/15
End cover width
Tightening torque max
Short circuit stability r...
Oscillation, broadband no...
Shock test result
Test duration per axis
Specific optical density ...
Fire protection for rail ...
Smoke gas toxicity NFPA 1...
Connection method
Stripping length
Overvoltage category
Result of power-frequency...
Tensile test result
Short-time current
ASD level
Test specification, shock...
Relative insulation mater...
Fire protection for rail ...
Calorimetric heat release...
Fire protection for rail ...
Length
Tightening torque, min
UNSPSC 12.01
Result of surge voltage t...
Result of tight fit on su...
Setpoint
Result of temperature-ris...
Proof of thermal characte...
Test specification, oscil...
Test directions
Number of shocks per dire...
Static insulating materia...
Fire protection for rail ...
Width
Height NS 35/7,5
Screw thread
Height
Selected product
3045088
Phoenix Contact
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 24 A, connection method: Screw c...
Surface flammability NFPA 130 (ASTM E 162)passed
Number of levels1
Insulating materialPA
Maximum power dissipation for nominal condition0.77 W
Nominal voltage UN1000 V
Open side panelYes
Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed
Power frequency withstand voltage setpoint2.2 kV
Tight fit on carrierNS 35
Requirement temperature-rise testIncrease in temperature ≤ 45...
Result of thermal testTest passed
Conductor cross section short circuit testing4 mm²
Operating temperature-60 °C ... 105 °C (max. shor...
Ambient temperature (actuation)-5 °C ... 70 °C
ECLASS 4.127141100
ETIM 7.0EC000897
Connection in acc. with standardCSA
Conductor cross section flexible min.0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1.5 mm²
UNSPSC 7.090139121410
UNSPSC 1139121410
Nominal cross section2.5 mm²
Flammability rating according to UL 94V0
Maximum load current32 A (with 4 mm² conductor c...
Nominal current IN24 A
Bending test turns135
Conductor cross section solid min.0.14 mm²
ECLASS 5.127141100
ETIM 4.0EC000897
UNSPSC 13.239121410
UNSPSC 21.039121410
Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²
Permissible humidity (storage/transport)30 % ... 70 %
China RoHSEnvironmentally Friendly Use...
Colorblack
Rated surge voltage8 kV
Back of the hand protectionguaranteed
Result of flexion and pull-out testTest passed
Result of voltage-drop testTest passed
Max. AWG conductor cross section, flexible12
Conductor cross section AWG max.12
ETIM 6.0EC000897
UNSPSC 20.039121410
Shock formHalf-sine
Conductor cross section AWG min.26
Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²
2 conductors with same cross section, solid max.1.5 mm²
Potentials1
Area of applicationRailway industry
Degree of pollution3
Shock protection test specificationDIN EN 50274 (VDE 0660-514):...
Finger protectionguaranteed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²
Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...
ECLASS 10.0.127141120
ECLASS 6.027141100
ETIM 3.0EC000897
Number of connections2
NoteNote: Product releases, conn...
Conductor cross section solid max.4 mm²
Min. AWG conductor cross section, flexible26
2 conductors with same cross section, stranded min.0.14 mm²
2 conductors with same cross section, solid min.0.14 mm²
Internal cylindrical gageA3
Ambient temperature (assembly)-5 °C ... 70 °C
ECLASS 4.027141100
ECLASS 5.027141100
ECLASS 9.027141120
UNSPSC 19.039121410
Conductor cross section flexible max.2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²
2 conductors with same cross section, stranded max.1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²
ECLASS 11.027141120
ECLASS 7.027141120
ETIM 2.0EC000897
UNSPSC 6.0130211811
UNSPSC 18.039121410
Insulating material groupI
Bending test rotation speed10 rpm
Bending test conductor cross section/weight0.14 mm² / 0.2 kg
Test frequencyf1 = 5 Hz to f2 = 150 Hz
Test spectrumService life test category 1...
Acceleration5g
Shock duration30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))130 °C
Height NS 35/1555 mm
End cover width2.2 mm
Tightening torque max0.6 Nm
Short circuit stability resultTest passed
Oscillation, broadband noise test resultTest passed
Shock test resultTest passed
Test duration per axis5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)passed
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)passed
Connection methodScrew connection
Stripping length9 mm
Overvoltage categoryIII
Result of power-frequency withstand voltage testTest passed
Tensile test resultTest passed
Short-time current0.48 kA
ASD level1.857 (m/s2)2/Hz
Test specification, shock testDIN EN 50155 (VDE 0115-200):...
Relative insulation material temperature index (Elec., UL 746 B)130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3
Length47.7 mm
Tightening torque, min0.5 Nm
UNSPSC 12.0139121410
Result of surge voltage testTest passed
Result of tight fit on supportTest passed
Setpoint1 N
Result of temperature-rise testTest passed
Proof of thermal characteristics (needle flame) effective duration30 s
Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...
Test directionsX-, Y- and Z-axis (pos. and ...
Number of shocks per direction3
Static insulating material application in cold-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3
Width5.2 mm
Height NS 35/7,547.5 mm
Screw threadM3
Height-
3044542
Phoenix Contact
Feed-through terminal block, nom. voltage: 500 V, nominal current: 24 A, connection method: Screw co...
Surface flammability NFPA 130 (ASTM E 162)passed
Number of levels1
Insulating materialPA
Maximum power dissipation for nominal condition0.77 W
Nominal voltage UN500 V
Open side panelYes
Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed
Power frequency withstand voltage setpoint1.89 kV
Tight fit on carrierNS 35
Requirement temperature-rise testIncrease in temperature ≤ 45...
Result of thermal testTest passed
Conductor cross section short circuit testing4 mm²
Operating temperature-60 °C ... 105 °C (max. shor...
Ambient temperature (actuation)-5 °C ... 70 °C
ECLASS 4.127141100
ETIM 7.0EC000897
Connection in acc. with standardCSA
Conductor cross section flexible min.0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1 mm²
UNSPSC 7.090139121410
UNSPSC 1139121410
Nominal cross section2.5 mm²
Flammability rating according to UL 94V0
Maximum load current30 A (in case of a 4 mm² con...
Nominal current IN24 A
Bending test turns135
Conductor cross section solid min.0.14 mm²
ECLASS 5.127141100
ETIM 4.0EC000897
UNSPSC 13.239121410
UNSPSC 21.039121410
Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²
Permissible humidity (storage/transport)30 % ... 70 %
China RoHSEnvironmentally Friendly Use...
Colorgray
Rated surge voltage6 kV
Back of the hand protectionguaranteed
Result of flexion and pull-out testTest passed
Result of voltage-drop testTest passed
Max. AWG conductor cross section, flexible12
Conductor cross section AWG max.12
ETIM 6.0EC000897
UNSPSC 20.039121410
Shock formHalf-sine
Conductor cross section AWG min.26
Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²
2 conductors with same cross section, solid max.1.5 mm²
Potentials1
Area of applicationRailway industry
Degree of pollution3
Shock protection test specificationDIN EN 50274 (VDE 0660-514):...
Finger protectionguaranteed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²
Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...
ECLASS 10.0.127141120
ECLASS 6.027141100
ETIM 3.0EC000901
Number of connections4
Note-
Conductor cross section solid max.4 mm²
Min. AWG conductor cross section, flexible26
2 conductors with same cross section, stranded min.0.14 mm²
2 conductors with same cross section, solid min.0.14 mm²
Internal cylindrical gageA3
Ambient temperature (assembly)-5 °C ... 70 °C
ECLASS 4.027141100
ECLASS 5.027141100
ECLASS 9.027141120
UNSPSC 19.039121410
Conductor cross section flexible max.4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²
2 conductors with same cross section, stranded max.1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²
ECLASS 11.027141120
ECLASS 7.027141120
ETIM 2.0EC000901
UNSPSC 6.0130211811
UNSPSC 18.039121410
Insulating material groupI
Bending test rotation speed10 rpm
Bending test conductor cross section/weight0.14 mm² / 0.2 kg
Test frequencyf1 = 5 Hz to f2 = 150 Hz
Test spectrumService life test category 1...
Acceleration5g
Shock duration30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C
Height NS 35/1555 mm
End cover width2.2 mm
Tightening torque max0.6 Nm
Short circuit stability resultTest passed
Oscillation, broadband noise test resultTest passed
Shock test resultTest passed
Test duration per axis5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)passed
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)passed
Connection methodScrew connection
Stripping length9 mm
Overvoltage categoryIII
Result of power-frequency withstand voltage testTest passed
Tensile test resultTest passed
Short-time current0.48 kA
ASD level1.857 (m/s2)2/Hz
Test specification, shock testDIN EN 50155 (VDE 0115-200):...
Relative insulation material temperature index (Elec., UL 746 B)130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3
Length65.4 mm
Tightening torque, min0.5 Nm
UNSPSC 12.0139121410
Result of surge voltage testTest passed
Result of tight fit on supportTest passed
Setpoint1 N
Result of temperature-rise testTest passed
Proof of thermal characteristics (needle flame) effective duration30 s
Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...
Test directionsX-, Y- and Z-axis (pos. and ...
Number of shocks per direction3
Static insulating material application in cold-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3
Width5.2 mm
Height NS 35/7,547.5 mm
Screw threadM3
Height46.9 mm
3045075
Phoenix Contact
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 24 A, connection method: Screw c...
Surface flammability NFPA 130 (ASTM E 162)-
Number of levels1
Insulating materialPA
Maximum power dissipation for nominal condition0.77 W
Nominal voltage UN1000 V
Open side panelYes
Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed
Power frequency withstand voltage setpoint2.2 kV
Tight fit on carrierNS 35
Requirement temperature-rise testIncrease in temperature ≤ 45...
Result of thermal testTest passed
Conductor cross section short circuit testing4 mm²
Operating temperature-60 °C ... 105 °C (max. shor...
Ambient temperature (actuation)-5 °C ... 70 °C
ECLASS 4.127141100
ETIM 7.0EC000897
Connection in acc. with standardCSA
Conductor cross section flexible min.0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1.5 mm²
UNSPSC 7.090139121410
UNSPSC 1139121410
Nominal cross section2.5 mm²
Flammability rating according to UL 94V0
Maximum load current32 A (with 4 mm² conductor c...
Nominal current IN24 A
Bending test turns135
Conductor cross section solid min.0.14 mm²
ECLASS 5.127141100
ETIM 4.0EC000897
UNSPSC 13.239121410
UNSPSC 21.039121410
Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²
Permissible humidity (storage/transport)30 % ... 70 %
China RoHSEnvironmentally Friendly Use...
Colorwhite
Rated surge voltage8 kV
Back of the hand protectionguaranteed
Result of flexion and pull-out testTest passed
Result of voltage-drop testTest passed
Max. AWG conductor cross section, flexible12
Conductor cross section AWG max.12
ETIM 6.0EC000897
UNSPSC 20.039121410
Shock formHalf-sine
Conductor cross section AWG min.26
Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²
2 conductors with same cross section, solid max.1.5 mm²
Potentials1
Area of applicationRailway industry
Degree of pollution3
Shock protection test specificationDIN EN 50274 (VDE 0660-514):...
Finger protectionguaranteed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²
Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...
ECLASS 10.0.127141120
ECLASS 6.027141100
ETIM 3.0EC000897
Number of connections2
NoteNote: Product releases, conn...
Conductor cross section solid max.4 mm²
Min. AWG conductor cross section, flexible26
2 conductors with same cross section, stranded min.0.14 mm²
2 conductors with same cross section, solid min.0.14 mm²
Internal cylindrical gageA3
Ambient temperature (assembly)-5 °C ... 70 °C
ECLASS 4.027141100
ECLASS 5.027141100
ECLASS 9.027141120
UNSPSC 19.039121410
Conductor cross section flexible max.2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²
2 conductors with same cross section, stranded max.1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²
ECLASS 11.027141120
ECLASS 7.027141120
ETIM 2.0EC000897
UNSPSC 6.0130211811
UNSPSC 18.039121410
Insulating material groupI
Bending test rotation speed10 rpm
Bending test conductor cross section/weight0.14 mm² / 0.2 kg
Test frequencyf1 = 5 Hz to f2 = 150 Hz
Test spectrumService life test category 1...
Acceleration5g
Shock duration30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C
Height NS 35/1555 mm
End cover width2.2 mm
Tightening torque max0.6 Nm
Short circuit stability resultTest passed
Oscillation, broadband noise test resultTest passed
Shock test resultTest passed
Test duration per axis5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)-
Fire protection for rail vehicles (DIN EN 45545-2) R24-
Smoke gas toxicity NFPA 130 (SMP 800C)-
Connection methodScrew connection
Stripping length9 mm
Overvoltage categoryIII
Result of power-frequency withstand voltage testTest passed
Tensile test resultTest passed
Short-time current0.48 kA
ASD level1.857 (m/s2)2/Hz
Test specification, shock testDIN EN 50155 (VDE 0115-200):...
Relative insulation material temperature index (Elec., UL 746 B)130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23-
Calorimetric heat release NFPA 130 (ASTM E 1354)-
Fire protection for rail vehicles (DIN EN 45545-2) R26-
Length47.7 mm
Tightening torque, min0.5 Nm
UNSPSC 12.0139121410
Result of surge voltage testTest passed
Result of tight fit on supportTest passed
Setpoint1 N
Result of temperature-rise testTest passed
Proof of thermal characteristics (needle flame) effective duration30 s
Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...
Test directionsX-, Y- and Z-axis (pos. and ...
Number of shocks per direction3
Static insulating material application in cold-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22-
Width5.2 mm
Height NS 35/7,547.5 mm
Screw threadM3
Height-
About the manufacturer
Powermatic Associates is an authorized Phoenix Contact distributor, proudly offering a wide array of innovative industrial solutions that cater to modern technological demands. Phoenix Contact is a global leader renowned for its high-quality products in the fields of electrical engineering and automation technology. Their extensive catalog encompasses everything from connection technology, interface systems, and surge protection to automation software and control technology, making them a versatile choice for various industrial applications. At Powermatic Associates, we deliver Phoenix Contact’s pioneering connectivity and power management solutions, which include terminal blocks, connectors, relays, and PLCs. These components are essential for creating efficient and reliable electrical connections in diverse environments, ensuring seamless system integration. The company's comprehensive range of Industrial Internet of Things (IIoT) solutions facilitates intelligent networking, enabling customers to optimize their automation processes with cutting-edge technology. Phoenix Contact's emphasis on sustainability and innovation reflects in their energy management systems and renewable energy solutions. By incorporating these into your operations, you not only enhance efficiency but also contribute to sustainable practices, aligning with modern environmental standards. Powermatic Associates recognizes the significance of such advancements and partners with Phoenix Contact to provide expert engineering support and tailored solutions, helping you implement smart technologies that drive productivity and minimize costs. With a focus on safety and reliability, Phoenix Contact offers advanced surge protection devices and signal conditioners that safeguard your equipment against voltage spikes and ensure data integrity. In collaboration with Powermatic Associates, customers gain access to robust technical support and consultation, ensuring that every project benefits from personalized guidance and quick resolution of technical challenges. Our partnership extends the reach of Phoenix Contact’s globally recognized industrial automation products, including Human Machine Interfaces (HMIs) and Ethernet switches, empowering businesses with enhanced operational control and communication capabilities. Customers can trust Powermatic Associates to deliver prompt shipping and thorough assistance, ensuring that Phoenix Contact’s top-tier products are seamlessly integrated into their workflows for optimal performance.
Recently viewed products
Relevant products
FAQ
6 in stock
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 24 A, connection method: Screw connection, number of connections: 2, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: black, mounting type: NS 35/7,5, NS 35/15
Similar products from: Terminal Blocks
What can I help you find today?
