572081 Festo Directional Control Valves

Product Details

• Input resistance
  34 kOhm
• Width
  10 mm
• Reset method
  Pneumatic spring
• Information on operation
  Power supply unit must be able to supply at least 1.7 A without voltage drop. For block assembly with flow rate at max. ambient temperature 45 °C.
• Manual override
  None
• Reverse polarity protection
  for operating voltage
• C value
  0.2 l/sbar
• Switching time on at 4 bar and 24 V in new condition
  0.8 ms
• Switching time on at 8 bar and 24 V in new condition
  0.9 ms
• Switching time off at 8 bar and 24 V in new condition
  0.9 ms
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Storage temperature
  -20 °C ... 50 °C
• Ambient temperature
  -5 °C ... 60 °C
• Electrical connection
  3-wire Cable
• Housing material
  PA-reinforced PPS-reinforced
• Note on input current
  Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
• Standard nominal flow rate
  50 l/min
• Degree of protection
  IP65
• Type of control
  Direct
• b-value
  0.5
Switching time off at 4 bar and 24 V in new condition
1 ms
Tolerance for switching time off
+15 %/-25 %
Coil characteristics
24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
CE marking (see declaration of conformity)
As per EU EMC directive
Permissible solenoid surface temperature
120 °C
Product weight
85 g
Material of cable sheath
PUR
KC characters
KC EMC
Actuation type
Electrical
Design
Poppet valve without return spring
Type code
MHJ10
Mounting position
Any
Symbol
00992259
Max. switching frequency
500 Hz
Tolerance for ON switching time
+/-15 %
Permissible voltage fluctuations
+/- 10 %
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Cable length
2.5 m
Pneumatic connection 1
QS-4
Material of screws
Steel
Pneumatic working port
QS-4
Certification
RCM compliance mark
Width dimension
10.5 mm
Sealing principle
Hard
Flow direction
Non-reversible
Additional functions
Spark suppression Safety shut-down
Switching time on at 0.5 bar and 24 V in new condition
0.7 ms
DC operating voltage range
21.6 V ... 26.4 V
Trigger signal range DC
3 V ... 30 V
Information on operating and pilot media
Operation with oil lubrication not possible
Temperature of medium
-5 °C ... 60 °C
Pneumatic connection 2
QS-4
Seals material
HNBR
Valve function
2/2, closed, monostable
Operating pressure
0.5 bar ... 8 bar
Operating voltage
24V DC
Switching time off at 0.5 bar and 24 V in new condition
0.9 ms
Duty cycle
100%
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Type of mounting
Optionally: With through-hole
Note on materials
RoHS-compliant

Related documents 572081 Specs