572080 Festo Directional Control Valves

572080 on Powermatic Associates
Festo

Part#:572080

Alt. Part#:MHJ10-S-2,5-LF

Manufacturer:Festo

Category:Directional Control Valves

Product Lifecycle:Active

Product description

solenoid valve MHJ10-S-2,5-LF Valve function: 2/2 closed, monostable, Type of actuation: electrical, Width: 10 mm, Standard nominal flow rate: 50 l/min, Operating pressure: 0,5 - 8 bar

Product Details

  • KC characters
    KC EMC
  • Actuation type
    Electrical
  • Design
    Poppet valve without return spring
  • Width dimension
    10.5 mm
  • Mounting position
    Any
  • Standard nominal flow rate
    50 l/min
  • Degree of protection
    IP65
  • Sealing principle
    Hard
  • Symbol
    00992259
  • C value
    0.2 l/sbar
  • Switching time off at 4 bar and 24 V in new condition
    1 ms
  • Switching time off at 8 bar and 24 V in new condition
    0.9 ms
  • DC operating voltage range
    21.6 V ... 26.4 V
  • Trigger signal range DC
    3 V ... 30 V
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Permissible solenoid surface temperature
    120 °C
  • Max. tightening torque for valve mounting
    0.7 Nm
  • Type of mounting
    On sub-base
  • Material of cable sheath
    PUR
  • Valve function
    2/2, closed, monostable
  • Operating pressure
    0.5 bar ... 8 bar
  • Operating voltage
    24V DC
  • Certification
    RCM compliance mark
  • Type of control
    Direct
  • Additional functions
    Spark suppression Safety shut-down
  • Switching time on at 4 bar and 24 V in new condition
    0.8 ms
  • Switching time on at 8 bar and 24 V in new condition
    0.9 ms
  • Duty cycle
    100%
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Product weight
    75 g
  • Pneumatic connection 1
    Sub-base
  • Pneumatic connection 2
    Sub-base
  • Input resistance
    34 kOhm
  • Width
    10 mm
  • Reset method
    Pneumatic spring
  • Type code
    MHJ10
  • Manual override
    None
  • Reverse polarity protection
    for operating voltage
  • Max. switching frequency
    500 Hz
  • Switching time off at 0.5 bar and 24 V in new condition
    0.9 ms
  • Tolerance for ON switching time
    +/-15 %
  • Restricted ambient and media temperature
    Depending on the switching frequency (see diagram)
  • Ambient temperature
    -5 °C ... 60 °C
  • Seals material
    HNBR
  • Note on input current
    Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
  • Pneumatic working port
    Sub-base
  • Information on operation
    Power supply unit must be able to supply at least 1.7 A without voltage drop. For block assembly with flow rate at max. ambient temperature 45 °C.
  • Flow direction
    Non-reversible
  • b-value
    0.5
  • Switching time on at 0.5 bar and 24 V in new condition
    0.7 ms
  • Tolerance for switching time off
    +15 %/-25 %
  • Coil characteristics
    24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Information on operating and pilot media
    Operation with oil lubrication not possible
  • Electrical connection
    3-wire Cable
  • Housing material
    PA-reinforced PPS-reinforced
  • Permissible voltage fluctuations
    +/- 10 %
  • Storage temperature
    -20 °C ... 50 °C
  • Temperature of medium
    -5 °C ... 60 °C
  • Cable length
    2.5 m
  • Note on materials
    RoHS-compliant
  • Material of screws
    Steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.



572080 Related Documents

Manufacturer warranty

572080 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 572080 with other products

KC characters

Actuation type

Design

Width dimension

Mounting position

Standard nominal flow rat...

Degree of protection

Sealing principle

Symbol

C value

Switching time off at 4 b...

Switching time off at 8 b...

DC operating voltage rang...

Trigger signal range DC

Corrosion resistance clas...

Permissible solenoid surf...

Max. tightening torque fo...

Type of mounting

Material of cable sheath

Valve function

Operating pressure

Operating voltage

Certification

Type of control

Additional functions

Switching time on at 4 ba...

Switching time on at 8 ba...

Duty cycle

CE marking (see declarati...

Product weight

Pneumatic connection 1

Pneumatic connection 2

Input resistance

Width

Reset method

Type code

Manual override

Reverse polarity protecti...

Max. switching frequency

Switching time off at 0.5...

Tolerance for ON switchin...

Restricted ambient and me...

Ambient temperature

Seals material

Note on input current

Pneumatic working port

Information on operation

Flow direction

b-value

Switching time on at 0.5 ...

Tolerance for switching t...

Coil characteristics

Operating medium

Information on operating ...

Electrical connection

Housing material

Permissible voltage fluct...

Storage temperature

Temperature of medium

Cable length

Note on materials

Material of screws

Lap

Nominal width

Operating pressure, rever...

Pneumatic connection 3

On switching time

Switching time variation ...

Exhaust air function

Switching time off

Vibration resistance

Shock resistance

Selected product

572080
0 in stock
572080
Festo

solenoid valve MHJ10-S-2,5-LF Valve function: 2/2 closed, monostable, Type of actuation: electrical,...

KC charactersKC EMC

Actuation typeElectrical

DesignPoppet valve without return ...

Width dimension10.5 mm

Mounting positionAny

Standard nominal flow rate50 l/min

Degree of protectionIP65

Sealing principleHard

Symbol00992259

C value0.2 l/sbar

Switching time off at 4 bar and 24 V in new condition1 ms

Switching time off at 8 bar and 24 V in new condition0.9 ms

DC operating voltage range21.6 V ... 26.4 V

Trigger signal range DC3 V ... 30 V

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Permissible solenoid surface temperature120 °C

Max. tightening torque for valve mounting0.7 Nm

Type of mountingOn sub-base

Material of cable sheathPUR

Valve function2/2, closed, monostable

Operating pressure0.5 bar ... 8 bar

Operating voltage24V DC

CertificationRCM compliance mark

Type of controlDirect

Additional functionsSpark suppression Safety shu...

Switching time on at 4 bar and 24 V in new condition0.8 ms

Switching time on at 8 bar and 24 V in new condition0.9 ms

Duty cycle100%

CE marking (see declaration of conformity)As per EU EMC directive

Product weight75 g

Pneumatic connection 1Sub-base

Pneumatic connection 2Sub-base

Input resistance34 kOhm

Width10 mm

Reset methodPneumatic spring

Type codeMHJ10

Manual overrideNone

Reverse polarity protectionfor operating voltage

Max. switching frequency500 Hz

Switching time off at 0.5 bar and 24 V in new condition0.9 ms

Tolerance for ON switching time+/-15 %

Restricted ambient and media temperatureDepending on the switching f...

Ambient temperature-5 °C ... 60 °C

Seals materialHNBR

Note on input currentLinear increase 0.44-15.44 m...

Pneumatic working portSub-base

Information on operationPower supply unit must be ab...

Flow directionNon-reversible

b-value0.5

Switching time on at 0.5 bar and 24 V in new condition0.7 ms

Tolerance for switching time off+15 %/-25 %

Coil characteristics24 V DC: low-current phase 2...

Operating mediumCompressed air as per ISO 85...

Information on operating and pilot mediaOperation with oil lubricati...

Electrical connection3-wire Cable

Housing materialPA-reinforced PPS-reinforced

Permissible voltage fluctuations+/- 10 %

Storage temperature-20 °C ... 50 °C

Temperature of medium-5 °C ... 60 °C

Cable length2.5 m

Note on materialsRoHS-compliant

Material of screwsSteel

Lap-

Nominal width-

Operating pressure, reversible-

Pneumatic connection 3-

On switching time-

Switching time variation at 1 Hz and above-

Exhaust air function-

Switching time off-

Vibration resistance-

Shock resistance-

572081
46 in stock
572081
Festo

solenoid valve MHJ10-S-2,5-QS-4-LF Valve function: 2/2 closed, monostable, Type of actuation: electr...

KC charactersKC EMC

Actuation typeElectrical

DesignPoppet valve without return ...

Width dimension10.5 mm

Mounting positionAny

Standard nominal flow rate50 l/min

Degree of protectionIP65

Sealing principleHard

Symbol00992259

C value0.2 l/sbar

Switching time off at 4 bar and 24 V in new condition1 ms

Switching time off at 8 bar and 24 V in new condition0.9 ms

DC operating voltage range21.6 V ... 26.4 V

Trigger signal range DC3 V ... 30 V

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Permissible solenoid surface temperature120 °C

Max. tightening torque for valve mounting-

Type of mountingOptionally: With through-hol...

Material of cable sheathPUR

Valve function2/2, closed, monostable

Operating pressure0.5 bar ... 8 bar

Operating voltage24V DC

CertificationRCM compliance mark

Type of controlDirect

Additional functionsSpark suppression Safety shu...

Switching time on at 4 bar and 24 V in new condition0.8 ms

Switching time on at 8 bar and 24 V in new condition0.9 ms

Duty cycle100%

CE marking (see declaration of conformity)As per EU EMC directive

Product weight85 g

Pneumatic connection 1QS-4

Pneumatic connection 2QS-4

Input resistance34 kOhm

Width10 mm

Reset methodPneumatic spring

Type codeMHJ10

Manual overrideNone

Reverse polarity protectionfor operating voltage

Max. switching frequency500 Hz

Switching time off at 0.5 bar and 24 V in new condition0.9 ms

Tolerance for ON switching time+/-15 %

Restricted ambient and media temperatureDepending on the switching f...

Ambient temperature-5 °C ... 60 °C

Seals materialHNBR

Note on input currentLinear increase 0.44-15.44 m...

Pneumatic working portQS-4

Information on operationPower supply unit must be ab...

Flow directionNon-reversible

b-value0.5

Switching time on at 0.5 bar and 24 V in new condition0.7 ms

Tolerance for switching time off+15 %/-25 %

Coil characteristics24 V DC: low-current phase 2...

Operating mediumCompressed air as per ISO 85...

Information on operating and pilot mediaOperation with oil lubricati...

Electrical connection3-wire Cable

Housing materialPA-reinforced PPS-reinforced

Permissible voltage fluctuations+/- 10 %

Storage temperature-20 °C ... 50 °C

Temperature of medium-5 °C ... 60 °C

Cable length2.5 m

Note on materialsRoHS-compliant

Material of screwsSteel

Lap-

Nominal width-

Operating pressure, reversible-

Pneumatic connection 3-

On switching time-

Switching time variation at 1 Hz and above-

Exhaust air function-

Switching time off-

Vibration resistance-

Shock resistance-

525193
146 in stock
525193
Festo

solenoid valve MHE4-MS1H-3/2G-QS-8-K individual valve, fast switching, with cable. Valve function: 3...

KC charactersKC EMC

Actuation typeElectrical

DesignPressure-relieved poppet val...

Width dimension24 mm

Mounting positionAny

Standard nominal flow rate400 l/min

Degree of protectionIP65

Sealing principleSoft

Symbol00991308

C value-

Switching time off at 4 bar and 24 V in new condition-

Switching time off at 8 bar and 24 V in new condition-

DC operating voltage range-

Trigger signal range DC-

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Permissible solenoid surface temperature-

Max. tightening torque for valve mounting-

Type of mountingWith through-hole

Material of cable sheathPUR

Valve function3/2, closed, monostable

Operating pressure-0.9 bar ... 8 bar

Operating voltage24V DC

CertificationRCM compliance mark c UL us ...

Type of controlDirect

Additional functionsSpark suppression Protective...

Switching time on at 4 bar and 24 V in new condition-

Switching time on at 8 bar and 24 V in new condition-

Duty cycle100%

CE marking (see declaration of conformity)As per EU EMC directive

Product weight270 g

Pneumatic connection 1QS-8

Pneumatic connection 2QS-8

Input resistance-

Width18 mm

Reset methodMechanical spring

Type codeMH4

Manual overrideNon-detenting

Reverse polarity protectionBipolar

Max. switching frequency210 Hz

Switching time off at 0.5 bar and 24 V in new condition-

Tolerance for ON switching time+10%/-30%

Restricted ambient and media temperature-

Ambient temperature-5 °C ... 60 °C

Seals materialHNBR NBR

Note on input current-

Pneumatic working portQS-8

Information on operation-

Flow directionReversible with restrictions

b-value-

Switching time on at 0.5 bar and 24 V in new condition-

Tolerance for switching time off+10 %/-40 %

Coil characteristics24 V DC: low-current phase 2...

Operating mediumCompressed air as per ISO 85...

Information on operating and pilot mediaOperation with oil lubricati...

Electrical connectionCable

Housing materialDie-cast zinc Coated

Permissible voltage fluctuations+/- 10 %

Storage temperature-

Temperature of medium-5 °C ... 60 °C

Cable length2.5 m

Note on materialsFree of copper and PTFE RoHS...

Material of screwsSteel Galvanized

LapUnderlap

Nominal width4 mm

Operating pressure, reversible-0.9 bar ... 1 bar

Pneumatic connection 3QS-8

On switching time3.5 ms

Switching time variation at 1 Hz and above0.3 ms

Exhaust air functionWith flow control option

Switching time off3.5 ms

Vibration resistanceTransport application test w...

Shock resistanceShock test with severity lev...

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to electric drives and complete automation systems, Festo ensures that industries can achieve seamless operations and enhanced productivity. As specialists in motion and control technologies, Powermatic Associates supplies Festo's advanced pneumatics and electromechanical systems, designed to meet the rigorous demands of modern manufacturing environments. Festo's pneumatic cylinders and actuators are engineered for precision and reliability, providing optimal performance in a variety of applications, from simple handling tasks to complex automation processes. Festo's cutting-edge sensors and control units further complement these systems by delivering accurate data and enabling sophisticated process control, which are essential for smart factory initiatives. Moreover, Festo excels in modular automation solutions, allowing businesses to customize systems tailored specifically to their operational needs. Their energy-efficient pneumatic components and electric automation solutions are designed to reduce energy consumption and contribute to sustainable manufacturing practices. By integrating Festo’s products into their facilities, customers can streamline production processes, minimize downtime, and elevate overall operational efficiency. Powermatic Associates complements Festo's product range with our extensive value-added services, including expert engineering support and customized automation solutions. Our partnership with Festo allows us to provide superior technical assistance and rapid delivery from our well-stocked inventory. Whether you need precise fluid control, reliable actuation, or comprehensive system integration, Powermatic Associates and Festo together offer unparalleled service and solutions. Trust in our collaboration to harness the latest advancements in automation technology, ensuring your projects remain on track and your business achieves maximum profitability. Through this strategic partnership, Powermatic Associates and Festo empower industries to embrace innovation and maintain a competitive edge in the fast-evolving industrial landscape, driving forward efficiency, productivity, and sustainability.

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

solenoid valve MHJ10-S-2,5-LF Valve function: 2/2 closed, monostable, Type of actuation: electrical, Width: 10 mm, Standard nominal flow rate: 50 l/min, Operating pressure: 0,5 - 8 bar

Similar products from: Directional Control Valves

What can I help you find today?

Recommended parts