572079 Festo Directional Control Valves
Part#:572079
Alt. Part#:MHJ9-QS-4-LF
Manufacturer:Festo
Category:Directional Control Valves
Product Lifecycle:Active
Product description
solenoid valve MHJ9-QS-4-LF Valve function: 2/2 closed, monostable, Type of actuation: electrical, Width: 9 mm, Standard nominal flow rate: 50 l/min, Operating pressure: 0,5 - 8 bar
Product Details
- Operating pressure 0.5 bar ... 8 bar
- Pneumatic working port QS-4
- Reset method Pneumatic spring
- Sealing principle Hard
- Mounting position Any
- C value 0.2 l/sbar
- Switching time off at 0.5 bar and 24 V in new condition 0.9 ms
- Switching time off at 8 bar and 24 V in new condition 0.9 ms
- Tolerance for ON switching time +/-15 %
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Permissible solenoid surface temperature 120 °C
- Ambient temperature -5 °C ... 60 °C
- Width 9 mm
- Design Poppet valve without return spring
- Type code MHJ9
- b-value 0.5
- Switching time on at 4 bar and 48 V in new condition 0.6 ms
- Switching time on at 0.5 bar and 24 V in new condition 0.7 ms
- Duty cycle 100%
- Information on operating and pilot media Operation with oil lubrication not possible
- Product weight 30 g
- Pneumatic connection 2 QS-4
- Actuation type Electrical
- Standard nominal flow rate 50 l/min
- Information on operation Do not operate without flow. For block assembly with flow rate at max. ambient temperature 45 °C.
- Type of control Direct
- Symbol 00992259
- Switching time off at 4 bar and 48 V in new condition 0.8 ms
- Switching time on at 8 bar and 24 V in new condition 0.8 ms
- Note regarding operating voltage Operation only with connecting cable MHJ9-KMH-...
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Temperature of medium -5 °C ... 60 °C
- Seals material HNBR
- Degree of protection IP40
- Manual override None
- Max. switching frequency 500 Hz
- Switching time on at 4 bar and 24 V in new condition 0.7 ms
- Switching time off at 4 bar and 12 V in new condition 0.9 ms
- Tolerance for switching time off +15 %/-25 %
- Coil resistance 2.5 Ohm
- Storage temperature -20 °C ... 50 °C
- Electrical connection 2-pin KMH plug
- Material of screws Steel
- Valve function 2/2, closed, monostable
- Operating voltage 24V DC
- Width dimension 9.5 mm
- Flow direction Non-reversible
- Switching time off at 4 bar and 24 V in new condition 0.9 ms
- Switching time on at 4 bar and 12 V in new condition 1 ms
- DC operating voltage range 12 V ... 53 V
- Restricted ambient and media temperature Depending on the switching frequency (see diagram)
- Pneumatic connection 1 QS-4
- Type of mounting Optionally: With through-hole
- Housing material PA-reinforced
- Note on materials RoHS-compliant
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
572079 Related Documents
Manufacturer warranty
572079 Festo
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 572079 with other products
Operating pressure
Pneumatic working port
Reset method
Sealing principle
Mounting position
C value
Switching time off at 0.5...
Switching time off at 8 b...
Tolerance for ON switchin...
Operating medium
Permissible solenoid surf...
Ambient temperature
Width
Design
Type code
b-value
Switching time on at 4 ba...
Switching time on at 0.5 ...
Duty cycle
Information on operating ...
Product weight
Pneumatic connection 2
Actuation type
Standard nominal flow rat...
Information on operation
Type of control
Symbol
Switching time off at 4 b...
Switching time on at 8 ba...
Note regarding operating ...
Corrosion resistance clas...
Temperature of medium
Seals material
Degree of protection
Manual override
Max. switching frequency
Switching time on at 4 ba...
Switching time off at 4 b...
Tolerance for switching t...
Coil resistance
Storage temperature
Electrical connection
Material of screws
Valve function
Operating voltage
Width dimension
Flow direction
Switching time off at 4 b...
Switching time on at 4 ba...
DC operating voltage rang...
Restricted ambient and me...
Pneumatic connection 1
Type of mounting
Housing material
Note on materials
Input resistance
Reverse polarity protecti...
Note on input current
Coil characteristics
CE marking (see declarati...
Material of cable sheath
KC characters
Permissible voltage fluct...
Cable length
Certification
Additional functions
Trigger signal range DC
Lap
Nominal width
Operating pressure, rever...
Pneumatic connection 3
On switching time
Switching time variation ...
Exhaust air function
Switching time off
Vibration resistance
Shock resistance
Selected product
572079
Festo
solenoid valve MHJ9-QS-4-LF Valve function: 2/2 closed, monostable, Type of actuation: electrical, W...
Operating pressure0.5 bar ... 8 bar
Pneumatic working portQS-4
Reset methodPneumatic spring
Sealing principleHard
Mounting positionAny
C value0.2 l/sbar
Switching time off at 0.5 bar and 24 V in new condition0.9 ms
Switching time off at 8 bar and 24 V in new condition0.9 ms
Tolerance for ON switching time+/-15 %
Operating mediumCompressed air as per ISO 85...
Permissible solenoid surface temperature120 °C
Ambient temperature-5 °C ... 60 °C
Width9 mm
DesignPoppet valve without return ...
Type codeMHJ9
b-value0.5
Switching time on at 4 bar and 48 V in new condition0.6 ms
Switching time on at 0.5 bar and 24 V in new condition0.7 ms
Duty cycle100%
Information on operating and pilot mediaOperation with oil lubricati...
Product weight30 g
Pneumatic connection 2QS-4
Actuation typeElectrical
Standard nominal flow rate50 l/min
Information on operationDo not operate without flow....
Type of controlDirect
Symbol00992259
Switching time off at 4 bar and 48 V in new condition0.8 ms
Switching time on at 8 bar and 24 V in new condition0.8 ms
Note regarding operating voltageOperation only with connecti...
Corrosion resistance class (CRC)2 - Moderate corrosion stres...
Temperature of medium-5 °C ... 60 °C
Seals materialHNBR
Degree of protectionIP40
Manual overrideNone
Max. switching frequency500 Hz
Switching time on at 4 bar and 24 V in new condition0.7 ms
Switching time off at 4 bar and 12 V in new condition0.9 ms
Tolerance for switching time off+15 %/-25 %
Coil resistance2.5 Ohm
Storage temperature-20 °C ... 50 °C
Electrical connection2-pin KMH plug
Material of screwsSteel
Valve function2/2, closed, monostable
Operating voltage24V DC
Width dimension9.5 mm
Flow directionNon-reversible
Switching time off at 4 bar and 24 V in new condition0.9 ms
Switching time on at 4 bar and 12 V in new condition1 ms
DC operating voltage range12 V ... 53 V
Restricted ambient and media temperatureDepending on the switching f...
Pneumatic connection 1QS-4
Type of mountingOptionally: With through-hol...
Housing materialPA-reinforced
Note on materialsRoHS-compliant
Input resistance-
Reverse polarity protection-
Note on input current-
Coil characteristics-
CE marking (see declaration of conformity)-
Material of cable sheath-
KC characters-
Permissible voltage fluctuations-
Cable length-
Certification-
Additional functions-
Trigger signal range DC-
Lap-
Nominal width-
Operating pressure, reversible-
Pneumatic connection 3-
On switching time-
Switching time variation at 1 Hz and above-
Exhaust air function-
Switching time off-
Vibration resistance-
Shock resistance-
572081
Festo
solenoid valve MHJ10-S-2,5-QS-4-LF Valve function: 2/2 closed, monostable, Type of actuation: electr...
Operating pressure0.5 bar ... 8 bar
Pneumatic working portQS-4
Reset methodPneumatic spring
Sealing principleHard
Mounting positionAny
C value0.2 l/sbar
Switching time off at 0.5 bar and 24 V in new condition0.9 ms
Switching time off at 8 bar and 24 V in new condition0.9 ms
Tolerance for ON switching time+/-15 %
Operating mediumCompressed air as per ISO 85...
Permissible solenoid surface temperature120 °C
Ambient temperature-5 °C ... 60 °C
Width10 mm
DesignPoppet valve without return ...
Type codeMHJ10
b-value0.5
Switching time on at 4 bar and 48 V in new condition-
Switching time on at 0.5 bar and 24 V in new condition0.7 ms
Duty cycle100%
Information on operating and pilot mediaOperation with oil lubricati...
Product weight85 g
Pneumatic connection 2QS-4
Actuation typeElectrical
Standard nominal flow rate50 l/min
Information on operationPower supply unit must be ab...
Type of controlDirect
Symbol00992259
Switching time off at 4 bar and 48 V in new condition-
Switching time on at 8 bar and 24 V in new condition0.9 ms
Note regarding operating voltage-
Corrosion resistance class (CRC)2 - Moderate corrosion stres...
Temperature of medium-5 °C ... 60 °C
Seals materialHNBR
Degree of protectionIP65
Manual overrideNone
Max. switching frequency500 Hz
Switching time on at 4 bar and 24 V in new condition0.8 ms
Switching time off at 4 bar and 12 V in new condition-
Tolerance for switching time off+15 %/-25 %
Coil resistance-
Storage temperature-20 °C ... 50 °C
Electrical connection3-wire Cable
Material of screwsSteel
Valve function2/2, closed, monostable
Operating voltage24V DC
Width dimension10.5 mm
Flow directionNon-reversible
Switching time off at 4 bar and 24 V in new condition1 ms
Switching time on at 4 bar and 12 V in new condition-
DC operating voltage range21.6 V ... 26.4 V
Restricted ambient and media temperatureDepending on the switching f...
Pneumatic connection 1QS-4
Type of mountingOptionally: With through-hol...
Housing materialPA-reinforced PPS-reinforced
Note on materialsRoHS-compliant
Input resistance34 kOhm
Reverse polarity protectionfor operating voltage
Note on input currentLinear increase 0.44-15.44 m...
Coil characteristics24 V DC: low-current phase 2...
CE marking (see declaration of conformity)As per EU EMC directive
Material of cable sheathPUR
KC charactersKC EMC
Permissible voltage fluctuations+/- 10 %
Cable length2.5 m
CertificationRCM compliance mark
Additional functionsSpark suppression Safety shu...
Trigger signal range DC3 V ... 30 V
Lap-
Nominal width-
Operating pressure, reversible-
Pneumatic connection 3-
On switching time-
Switching time variation at 1 Hz and above-
Exhaust air function-
Switching time off-
Vibration resistance-
Shock resistance-
525193
Festo
solenoid valve MHE4-MS1H-3/2G-QS-8-K individual valve, fast switching, with cable. Valve function: 3...
Operating pressure-0.9 bar ... 8 bar
Pneumatic working portQS-8
Reset methodMechanical spring
Sealing principleSoft
Mounting positionAny
C value-
Switching time off at 0.5 bar and 24 V in new condition-
Switching time off at 8 bar and 24 V in new condition-
Tolerance for ON switching time+10%/-30%
Operating mediumCompressed air as per ISO 85...
Permissible solenoid surface temperature-
Ambient temperature-5 °C ... 60 °C
Width18 mm
DesignPressure-relieved poppet val...
Type codeMH4
b-value-
Switching time on at 4 bar and 48 V in new condition-
Switching time on at 0.5 bar and 24 V in new condition-
Duty cycle100%
Information on operating and pilot mediaOperation with oil lubricati...
Product weight270 g
Pneumatic connection 2QS-8
Actuation typeElectrical
Standard nominal flow rate400 l/min
Information on operation-
Type of controlDirect
Symbol00991308
Switching time off at 4 bar and 48 V in new condition-
Switching time on at 8 bar and 24 V in new condition-
Note regarding operating voltage-
Corrosion resistance class (CRC)2 - Moderate corrosion stres...
Temperature of medium-5 °C ... 60 °C
Seals materialHNBR NBR
Degree of protectionIP65
Manual overrideNon-detenting
Max. switching frequency210 Hz
Switching time on at 4 bar and 24 V in new condition-
Switching time off at 4 bar and 12 V in new condition-
Tolerance for switching time off+10 %/-40 %
Coil resistance-
Storage temperature-
Electrical connectionCable
Material of screwsSteel Galvanized
Valve function3/2, closed, monostable
Operating voltage24V DC
Width dimension24 mm
Flow directionReversible with restrictions
Switching time off at 4 bar and 24 V in new condition-
Switching time on at 4 bar and 12 V in new condition-
DC operating voltage range-
Restricted ambient and media temperature-
Pneumatic connection 1QS-8
Type of mountingWith through-hole
Housing materialDie-cast zinc Coated
Note on materialsFree of copper and PTFE RoHS...
Input resistance-
Reverse polarity protectionBipolar
Note on input current-
Coil characteristics24 V DC: low-current phase 2...
CE marking (see declaration of conformity)As per EU EMC directive
Material of cable sheathPUR
KC charactersKC EMC
Permissible voltage fluctuations+/- 10 %
Cable length2.5 m
CertificationRCM compliance mark c UL us ...
Additional functionsSpark suppression Protective...
Trigger signal range DC-
LapUnderlap
Nominal width4 mm
Operating pressure, reversible-0.9 bar ... 1 bar
Pneumatic connection 3QS-8
On switching time3.5 ms
Switching time variation at 1 Hz and above0.3 ms
Exhaust air functionWith flow control option
Switching time off3.5 ms
Vibration resistanceTransport application test w...
Shock resistanceShock test with severity lev...
About the manufacturer
Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to electric drives and complete automation systems, Festo ensures that industries can achieve seamless operations and enhanced productivity. As specialists in motion and control technologies, Powermatic Associates supplies Festo's advanced pneumatics and electromechanical systems, designed to meet the rigorous demands of modern manufacturing environments. Festo's pneumatic cylinders and actuators are engineered for precision and reliability, providing optimal performance in a variety of applications, from simple handling tasks to complex automation processes. Festo's cutting-edge sensors and control units further complement these systems by delivering accurate data and enabling sophisticated process control, which are essential for smart factory initiatives. Moreover, Festo excels in modular automation solutions, allowing businesses to customize systems tailored specifically to their operational needs. Their energy-efficient pneumatic components and electric automation solutions are designed to reduce energy consumption and contribute to sustainable manufacturing practices. By integrating Festo’s products into their facilities, customers can streamline production processes, minimize downtime, and elevate overall operational efficiency. Powermatic Associates complements Festo's product range with our extensive value-added services, including expert engineering support and customized automation solutions. Our partnership with Festo allows us to provide superior technical assistance and rapid delivery from our well-stocked inventory. Whether you need precise fluid control, reliable actuation, or comprehensive system integration, Powermatic Associates and Festo together offer unparalleled service and solutions. Trust in our collaboration to harness the latest advancements in automation technology, ensuring your projects remain on track and your business achieves maximum profitability. Through this strategic partnership, Powermatic Associates and Festo empower industries to embrace innovation and maintain a competitive edge in the fast-evolving industrial landscape, driving forward efficiency, productivity, and sustainability.
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
solenoid valve MHJ9-QS-4-LF Valve function: 2/2 closed, monostable, Type of actuation: electrical, Width: 9 mm, Standard nominal flow rate: 50 l/min, Operating pressure: 0,5 - 8 bar
Similar products from: Directional Control Valves
What can I help you find today?
