5242219 Festo Servo Motors

Product Details

• Rotor position sensor for manufacturer designation
  EQI 1131
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Electrical connection 1, connection technology
  M23x1
• Electrical connection for input 1, connection pattern
  00995913
• Mounting position
  Any
• Measuring flange
  250 x 250 x 15 mm, steel
• Certificate issuing authority
  UL E342973
• Max. brake no-load speed
  10000 1/min
• Storage lifetime, under nominal conditions
  20000 h
• Max. brake friction work
  5600 J
• DC brake response delay
  ≤ 2 ms
• Electrical connection 1, connection type
  Hybrid plug
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Balancing quality
  G 2.5
• Max. winding temperature
  155 °C
• Brake coil inductivity
  700 mH
• Brake current consumption
  0.46 A
• Number of pole pairs
  5
• Brake separation time
  ≤ 35 ms
Winding longitudinal inductivity Ld (phase)
4.2 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Type code
EMMT-AS
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal operating voltage DC
565 V
Contamination level
2
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Rotor position encoder for DC operating voltage
5 V
Brake closing time
10 ms
Cross inductivity Lq (phase)
5 mH
Thermal resistance
1.2 K/W
Thermal time constant
44 min
Nominal rotary speed
3000 1/min
Motor constants
0.44 Nm/A
Phase-phase winding resistance
2.68 Ohm
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Brake holding torque
2.5 Nm
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Detent torque
< 1.0% of peak torque
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Brake stopping current
0.33 A
Max. mechanical speed
16000 1/min
Electric time constant
3 ms
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder for absolutely detectable revolutions
4096
Rotor position sensor measuring principle
Inductive
Max. rotational speed
11900 1/min
Brake power consumption
11 W
Motor nominal power
410 W
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Relative air humidity
0 - 90 %
Total output inertia moment
0.49 kgcm²
Thermal class according to EN 60034-1
F
Stall torque
1.56 Nm
Interface code, motor out
60P
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Electrical connection 1, number of pins/wires
15
Brake airflow
0.33 A
Brake coil resistance
52.4 Ohm
Rotor position sensor
Absolute encoder, multi-turn
Brake DC operating voltage
24 V
Rotor position sensor resolution
19 bit
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Nominal torque
1.3 Nm
Permissible radial shaft load
350 N
Product weight
2230 g
Standstill torque constant
0.52 Nm/A
Rotor position encoder for positional values per revolution
524288
Rotor position sensor interface
EnDat® 22
Continuous stall current
3.5 A
Motor nominal current
3 A
Peak current
18.3 A
Degree of protection
IP40
Brake mass moment of inertia
0.074 kgcm²
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Conforms to standard
IEC 60034
Winding inductance phase-phase
7 mH
Voltage constant, phase-to-phase
31.2 mVmin
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
5.6 Nm
Permissible axial shaft load
70 N
MTTFd, subcomponent
380 years, rotor position sensor

Related documents 5242219 Specs