5242203 Festo Servo Motors

Product Details

• Peak current
  5.4 A
• Detent torque
  < 1.0% of peak torque
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Motor type as per EN 60034-7
  IM B5 IM V3
• Max. winding temperature
  155 °C
• Brake coil inductivity
  700 mH
• Max. mechanical speed
  16000 1/min
• Brake closing time
  10 ms
• Electric time constant
  2.1 ms
• Rotor position encoder for DC operating voltage range
  3.6 V ... 14 V
• Thermal time constant
  41 min
• Rotor position sensor
  Absolute encoder, multi-turn
• Max. rotational speed
  12500 1/min
• Rotor position sensor resolution
  19 bit
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Balancing quality
  G 2.5
• Brake airflow
  0.33 A
• Brake coil resistance
  52.4 Ohm
• Number of pole pairs
  5
• Max. brake friction work
  5600 J
Standstill torque constant
0.49 Nm/A
Rotor position sensor measuring principle
Inductive
Brake power consumption
11 W
Phase-phase winding resistance
11.7 Ohm
Corrosion resistance class (CRC)
0 - No corrosion stress
Brake mass moment of inertia
0.074 kgcm²
Thermal class according to EN 60034-1
F
Permissible axial shaft load
70 N
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Conforms to standard
IEC 60034
Electrical connection for input 1, connection pattern
00995913
Mounting position
Any
Measuring flange
250 x 250 x 15 mm, steel
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. brake no-load speed
10000 1/min
Brake stopping current
0.33 A
Brake separation time
≤ 35 ms
Winding longitudinal inductivity Ld (phase)
13 mH
Rotor position encoder for absolutely detectable revolutions
4096
Type code
EMMT-AS
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Continuous stall current
1.6 A
Nominal operating voltage DC
565 V
Motor nominal power
190 W
Voltage constant, phase-to-phase
29.9 mVmin
Relative air humidity
0 - 90 %
Degree of protection
IP40
Total output inertia moment
0.257 kgcm²
Peak torque
1.6 Nm
MTTF, subcomponent
190 years, rotor position sensor
Interface code, motor out
60P
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Rotor position encoder for DC operating voltage
5 V
Cross inductivity Lq (phase)
15.5 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position sensor interface
EnDat® 22
Brake DC operating voltage
24 V
Motor nominal current
1.4 A
Winding inductance phase-phase
21 mH
Storage temperature
-20 °C ... 70 °C
Ambient temperature
-15 °C ... 40 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Stall torque
0.66 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection 1, connection type
Hybrid plug
Rotor position sensor for manufacturer designation
EQI 1131
Contamination level
2
Electrical connection 1, number of pins/wires
15
Max. installation height
4000 m
Brake current consumption
0.46 A
Storage lifetime, under nominal conditions
20000 h
DC brake response delay
≤ 2 ms
Thermal resistance
1.5 K/W
Rotor position encoder for positional values per revolution
524288
Nominal rotary speed
3000 1/min
Motor constants
0.41 Nm/A
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Brake holding torque
2.5 Nm
Permissible radial shaft load
350 N
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Nominal torque
0.6 Nm
Product weight
1500 g

5242203 Related Documents