5242197 Festo Servo Motors

Product Details

• Electrical connection for input 1, connection pattern
  00995913
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Measuring flange
  250 x 250 x 15 mm, steel
• Max. installation height
  4000 m
• Max. mechanical speed
  16000 1/min
• Standstill torque constant
  0.49 Nm/A
• Thermal resistance
  1.3 K/W
• Electrical connection 1, connection type
  Hybrid plug
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Balancing quality
  G 2.5
• Rotor position encoder for DC operating voltage
  5 V
• Winding longitudinal inductivity Ld (phase)
  13 mH
• Rotor position encoder for absolutely detectable revolutions
  4096
• Rotor position sensor
  Absolute encoder, multi-turn
• Continuous stall current
  1.7 A
• Rotor position sensor resolution
  19 bit
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Degree of protection
  IP40
• Permissible radial shaft load
  350 N
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
Mounting position
Any
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Electrical connection 1, number of pins/wires
15
Cross inductivity Lq (phase)
15.5 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Thermal time constant
40 min
Rotor position sensor measuring principle
Inductive
Nominal operating voltage DC
325 V
Phase-phase winding resistance
11.7 Ohm
Type of winding switch
Star inside
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Peak torque
1.6 Nm
MTTFd, subcomponent
380 years, rotor position sensor
MTTF, subcomponent
190 years, rotor position sensor
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. winding temperature
155 °C
Storage lifetime, under nominal conditions
20000 h
Electric time constant
2.1 ms
Rotor position encoder for positional values per revolution
524288
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor nominal current
1.6 A
Rating class according to EN 60034-1
S1
Corrosion resistance class (CRC)
0 - No corrosion stress
Certification
RCM compliance mark c UL us - Recognized (OL)
Total output inertia moment
0.169 kgcm²
Permissible axial shaft load
70 N
Conforms to standard
IEC 60034
Detent torque
< 1.0% of peak torque
Rotor position sensor for manufacturer designation
EQI 1131
Contamination level
2
Motor type as per EN 60034-7
IM B5 IM V3
Number of pole pairs
5
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Type code
EMMT-AS
Max. rotational speed
7100 1/min
Motor nominal power
200 W
Winding inductance phase-phase
21 mH
Peak current
5.4 A
Ambient temperature
-15 °C ... 40 °C
Stall torque
0.7 Nm
Interface code, motor out
60P
Rotor position sensor interface
EnDat® 22
Nominal rotary speed
3000 1/min
Motor constants
0.41 Nm/A
Voltage constant, phase-to-phase
29.9 mVmin
Relative air humidity
0 - 90 %
Nominal torque
0.64 Nm
Product weight
1180 g

5242197 Related Documents