5242199 Festo Servo Motors
Part#:5242199
Manufacturer:Festo
Alt. Part#:EMMT-AS-60-S-LS-RMB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-60-S-LS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5242199 Festo price in the box on the right side or send a quick quote.
Product Details
- Detent torque < 1.0% of peak torque
- Rotor position sensor for manufacturer designation EQI 1131
- Contamination level 2
- Measuring flange 250 x 250 x 15 mm, steel
- Brake airflow 0.33 A
- Max. mechanical speed 16000 1/min
- DC brake response delay ≤ 2 ms
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position sensor measuring principle Inductive
- Brake DC operating voltage 24 V
- Nominal operating voltage DC 325 V
- Peak current 5.4 A
- Voltage constant, phase-to-phase 29.9 mVmin
- Degree of protection IP40
- Relative air humidity 0 - 90 %
- Certification RCM compliance mark c UL us - Recognized (OL)
- MTTFd, subcomponent 380 years, rotor position sensor
- Conforms to standard IEC 60034
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Balancing quality G 2.5
- Max. winding temperature 155 °C
- Brake coil inductivity 700 mH
- Brake stopping current 0.33 A
- Brake closing time 10 ms
- Electric time constant 2.1 ms
- Rotor position encoder for positional values per revolution 524288
- Type code EMMT-AS
- Continuous stall current 1.6 A
- Motor constants 0.41 Nm/A
- Type of winding switch Star inside
- Rating class according to EN 60034-1 S1
- Brake holding torque 2.5 Nm
- Brake mass moment of inertia 0.074 kgcm²
- Permissible axial shaft load 70 N
- Interface code, motor out 60P
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Rotor position encoder for DC operating voltage 5 V
- Brake current consumption 0.46 A
- Max. brake friction work 5600 J
- Cross inductivity Lq (phase) 15.5 mH
- Standstill torque constant 0.49 Nm/A
- Thermal resistance 1.5 K/W
- Rotor position sensor interface EnDat® 22
- Brake power consumption 11 W
- Phase-phase winding resistance 11.7 Ohm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Ambient temperature -15 °C ... 40 °C
- Nominal torque 0.6 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Electrical connection for input 1, connection pattern 00995913
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Motor type as per EN 60034-7 IM B5 IM V3
- Electrical connection 1, number of pins/wires 15
- Max. brake no-load speed 10000 1/min
- Brake coil resistance 52.4 Ohm
- Number of pole pairs 5
- Storage lifetime, under nominal conditions 20000 h
- Winding longitudinal inductivity Ld (phase) 13 mH
- Rotor position encoder for absolutely detectable revolutions 4096
- Rotor position sensor Absolute encoder, multi-turn
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Nominal rotary speed 3000 1/min
- Motor nominal power 190 W
- Winding inductance phase-phase 21 mH
- Storage temperature -20 °C ... 70 °C
- Total output inertia moment 0.257 kgcm²
- Peak torque 1.6 Nm
- Permissible radial shaft load 350 N
- Product weight 1500 g
- Electrical connection 1, connection type Hybrid plug
- Mounting position Any
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Max. installation height 4000 m
- Brake separation time ≤ 35 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 41 min
- Max. rotational speed 7100 1/min
- Motor nominal current 1.4 A
- Rotor position sensor resolution 19 bit
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Thermal class according to EN 60034-1 F
- Stall torque 0.66 Nm
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 5242199 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?
