5242196 Festo Servo Motors

Product Details

• Motor nominal power
  200 W
• Peak current
  5.4 A
• Electrical connection 1, connection technology
  M23x1
• Rotor position sensor for manufacturer designation
  ECI 1118
• Measuring flange
  250 x 250 x 15 mm, steel
• Electrical connection 1, number of pins/wires
  15
• Number of pole pairs
  5
• Cross inductivity Lq (phase)
  15.5 mH
• Rotor position encoder for positional values per revolution
  262144
• Rotor position sensor
  Absolute encoder, single-turn
• Relative air humidity
  0 - 90 %
• Peak torque
  1.6 Nm
• Detent torque
  < 1.0% of peak torque
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Contamination level
  2
• Motor type as per EN 60034-7
  IM B5 IM V3
• Max. winding temperature
  155 °C
• Max. mechanical speed
  16000 1/min
• Electric time constant
  2.1 ms
Standstill torque constant
0.49 Nm/A
Rotor position sensor interface
EnDat® 22
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor constants
0.41 Nm/A
Electrical connection 1, connection type
Hybrid plug
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Balancing quality
G 2.5
Rotor position encoder for DC operating voltage
5 V
Storage lifetime, under nominal conditions
20000 h
Thermal time constant
40 min
Rotor position sensor measuring principle
Inductive
Continuous stall current
1.7 A
Winding inductance phase-phase
21 mH
Rotor position sensor resolution
18 bit
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Thermal class according to EN 60034-1
F
Ambient temperature
-15 °C ... 40 °C
Permissible radial shaft load
350 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal resistance
1.3 K/W
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Nominal rotary speed
3000 1/min
Motor nominal current
1.6 A
Phase-phase winding resistance
11.7 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Total output inertia moment
0.169 kgcm²
Permissible axial shaft load
70 N
Conforms to standard
IEC 60034
Electrical connection for input 1, connection pattern
00995913
Mounting position
Any
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Certificate issuing authority
UL E342973
Max. installation height
4000 m
Winding longitudinal inductivity Ld (phase)
13 mH
Rotor position encoder for absolutely detectable revolutions
1
Type code
EMMT-AS
Max. rotational speed
7100 1/min
Nominal operating voltage DC
325 V
Voltage constant, phase-to-phase
29.9 mVmin
Degree of protection
IP40
Nominal torque
0.64 Nm
Stall torque
0.7 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
MTTF, subcomponent
190 years, rotor position sensor
Product weight
1180 g
Interface code, motor out
60P

5242196 Related Documents