5242209 Festo Servo Motors

Product Details

• Electrical connection for input 1, connection pattern
  00995913
• Mounting position
  Any
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Motor type as per EN 60034-7
  IM B5 IM V3
• Rotor position encoder for DC operating voltage
  5 V
• Winding longitudinal inductivity Ld (phase)
  7 mH
• Electrical connection 1, connection technology
  M23x1
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Balancing quality
  G 2.5
• Max. mechanical speed
  16000 1/min
• Rotor position encoder for DC operating voltage range
  3.6 V ... 14 V
• Rotor position encoder system accuracy angle measurement
  -120 arcsec ... 120 arcsec
• Rotor position sensor
  Absolute encoder, multi-turn
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
• Nominal operating voltage DC
  565 V
• Peak current
  11 A
• Rating class according to EN 60034-1
  S1
• Ambient temperature
  -15 °C ... 40 °C
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. installation height
4000 m
Electric time constant
2.7 ms
Thermal resistance
1.1 K/W
Rotor position sensor measuring principle
Inductive
Motor nominal power
350 W
Winding inductance phase-phase
11 mH
Type of winding switch
Star inside
Thermal class according to EN 60034-1
F
Total output inertia moment
0.286 kgcm²
Permissible axial shaft load
70 N
Interface code, motor out
60P
Detent torque
< 1.0% of peak torque
Contamination level
2
Certificate issuing authority
UL E342973
Max. winding temperature
155 °C
Number of pole pairs
5
Cross inductivity Lq (phase)
8.2 mH
Rotor position encoder for positional values per revolution
524288
Rotor position sensor interface
EnDat® 22
Motor constants
0.45 Nm/A
Motor nominal current
2.4 A
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Peak torque
3.4 Nm
Permissible radial shaft load
350 N
Conforms to standard
IEC 60034
Electrical connection 1, connection type
Hybrid plug
Rotor position sensor for manufacturer designation
EQI 1131
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Measuring flange
250 x 250 x 15 mm, steel
Electrical connection 1, number of pins/wires
15
Storage lifetime, under nominal conditions
20000 h
Standstill torque constant
0.53 Nm/A
Type code
EMMT-AS
Nominal rotary speed
3000 1/min
Rotor position sensor resolution
19 bit
Voltage constant, phase-to-phase
32 mVmin
Storage temperature
-20 °C ... 70 °C
Relative air humidity
0 - 90 %
Certification
RCM compliance mark c UL us - Recognized (OL)
MTTF, subcomponent
190 years, rotor position sensor
Product weight
1530 g
Rotor position encoder for absolutely detectable revolutions
4096
Thermal time constant
41 min
Max. rotational speed
11800 1/min
Continuous stall current
2.7 A
Phase-phase winding resistance
4.85 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
MTTFd, subcomponent
380 years, rotor position sensor
Nominal torque
1.1 Nm
Stall torque
1.24 Nm
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

5242209 Related Documents