5242200 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Rotor position sensor for manufacturer designation
  ECI 1118
• Contamination level
  2
• Motor type as per EN 60034-7
  IM B5 IM V3
• Thermal resistance
  1.3 K/W
• Type code
  EMMT-AS
• Rotor position sensor measuring principle
  Inductive
• Continuous stall current
  1.7 A
• Motor nominal power
  200 W
• Rotor position sensor resolution
  18 bit
• Voltage constant, phase-to-phase
  29.9 mVmin
• Relative air humidity
  0 - 90 %
• Ambient temperature
  -15 °C ... 40 °C
• Peak torque
  1.6 Nm
• Stall torque
  0.7 Nm
• MTTFd, subcomponent
  380 years, rotor position sensor
• Electrical connection 1, connection technology
  M23x1
• Mounting position
  Any
• Measuring flange
  250 x 250 x 15 mm, steel
Balancing quality
G 2.5
Number of pole pairs
5
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder for absolutely detectable revolutions
1
Nominal rotary speed
3000 1/min
Max. rotational speed
12500 1/min
Motor nominal current
1.6 A
Type of winding switch
Star inside
Peak current
5.4 A
Storage temperature
-20 °C ... 70 °C
Total output inertia moment
0.169 kgcm²
Permissible radial shaft load
350 N
Electrical connection for input 1, connection pattern
00995913
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Max. winding temperature
155 °C
Rotor position encoder for DC operating voltage
5 V
Storage lifetime, under nominal conditions
20000 h
Winding longitudinal inductivity Ld (phase)
13 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Thermal time constant
40 min
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal operating voltage DC
565 V
Phase-phase winding resistance
11.7 Ohm
Rating class according to EN 60034-1
S1
Corrosion resistance class (CRC)
0 - No corrosion stress
Thermal class according to EN 60034-1
F
Nominal torque
0.64 Nm
Interface code, motor out
60P
Detent torque
< 1.0% of peak torque
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Certificate issuing authority
UL E342973
Max. installation height
4000 m
Standstill torque constant
0.49 Nm/A
Rotor position sensor
Absolute encoder, single-turn
Motor constants
0.41 Nm/A
Winding inductance phase-phase
21 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Certification
RCM compliance mark c UL us - Recognized (OL)
Permissible axial shaft load
70 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Electrical connection 1, number of pins/wires
15
Max. mechanical speed
16000 1/min
Cross inductivity Lq (phase)
15.5 mH
Electric time constant
2.1 ms
Rotor position encoder for positional values per revolution
262144
Rotor position sensor interface
EnDat® 22
MTTF, subcomponent
190 years, rotor position sensor
Product weight
1180 g
Conforms to standard
IEC 60034

5242200 Related Documents