5242215 Festo Servo Motors

Product Details

• Electrical connection 1, connection technology
  M23x1
• Electrical connection for input 1, connection pattern
  00995913
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Balancing quality
  G 2.5
• Brake airflow
  0.33 A
• Max. mechanical speed
  16000 1/min
• Electric time constant
  3 ms
• Max. brake friction work
  5600 J
• Rotor position encoder for DC operating voltage range
  3.6 V ... 14 V
• Rotor position encoder for absolutely detectable revolutions
  4096
• Rotor position sensor interface
  EnDat® 22
• Max. rotational speed
  6800 1/min
• Motor nominal power
  410 W
• Winding inductance phase-phase
  7 mH
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Degree of protection
  IP40
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Stall torque
  1.56 Nm
• Nominal torque
  1.3 Nm
• Detent torque
  < 1.0% of peak torque
Rotor position sensor for manufacturer designation
EQI 1131
Contamination level
2
Certificate issuing authority
UL E342973
Max. brake no-load speed
10000 1/min
Brake coil inductivity
700 mH
Brake stopping current
0.33 A
Brake separation time
≤ 35 ms
DC brake response delay
≤ 2 ms
Standstill torque constant
0.52 Nm/A
Type code
EMMT-AS
Rotor position sensor measuring principle
Inductive
Continuous stall current
3.5 A
Motor constants
0.44 Nm/A
Peak current
18.3 A
Voltage constant, phase-to-phase
31.2 mVmin
Ambient temperature
-15 °C ... 40 °C
Peak torque
5.6 Nm
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. installation height
4000 m
Brake coil resistance
52.4 Ohm
Storage lifetime, under nominal conditions
20000 h
Cross inductivity Lq (phase)
5 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Thermal time constant
44 min
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Brake power consumption
11 W
Rotor position sensor resolution
19 bit
Phase-phase winding resistance
2.68 Ohm
Thermal class according to EN 60034-1
F
Brake mass moment of inertia
0.074 kgcm²
MTTF, subcomponent
190 years, rotor position sensor
Product weight
2230 g
Electrical connection 1, connection type
Hybrid plug
Mounting position
Any
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Electrical connection 1, number of pins/wires
15
Thermal resistance
1.2 K/W
Rotor position encoder for positional values per revolution
524288
Nominal rotary speed
3000 1/min
Nominal operating voltage DC
325 V
Rating class according to EN 60034-1
S1
Corrosion resistance class (CRC)
0 - No corrosion stress
Storage temperature
-20 °C ... 70 °C
Brake holding torque
2.5 Nm
Permissible radial shaft load
350 N
Conforms to standard
IEC 60034
Interface code, motor out
60P
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Motor type as per EN 60034-7
IM B5 IM V3
Measuring flange
250 x 250 x 15 mm, steel
Max. winding temperature
155 °C
Rotor position encoder for DC operating voltage
5 V
Brake current consumption
0.46 A
Number of pole pairs
5
Brake closing time
10 ms
Winding longitudinal inductivity Ld (phase)
4.2 mH
Rotor position sensor
Absolute encoder, multi-turn
Brake DC operating voltage
24 V
Motor nominal current
3 A
Type of winding switch
Star inside
Relative air humidity
0 - 90 %
Total output inertia moment
0.49 kgcm²
MTTFd, subcomponent
380 years, rotor position sensor
Permissible axial shaft load
70 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Switching cycles, holding brake
10 million idle actuations (without friction work!)

Related documents 5242215 Specs