5242210 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Mounting position
  Any
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Balancing quality
  G 2.5
• Brake airflow
  0.33 A
• Brake coil resistance
  52.4 Ohm
• Number of pole pairs
  5
• Brake separation time
  ≤ 35 ms
• Winding longitudinal inductivity Ld (phase)
  7 mH
• Rotor position encoder for positional values per revolution
  262144
• Rotor position sensor measuring principle
  Inductive
• Motor constants
  0.45 Nm/A
• Nominal operating voltage DC
  565 V
• Peak current
  11 A
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Permissible axial shaft load
  70 N
• Detent torque
  < 1.0% of peak torque
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Rotor position encoder for DC operating voltage
5 V
Brake stopping current
0.33 A
Brake closing time
10 ms
Electric time constant
2.7 ms
Standstill torque constant
0.53 Nm/A
Rotor position sensor
Absolute encoder, single-turn
Max. rotational speed
11800 1/min
Continuous stall current
2.5 A
Rotor position sensor resolution
18 bit
Voltage constant, phase-to-phase
32 mVmin
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Nominal torque
1 Nm
MTTF, subcomponent
190 years, rotor position sensor
Conforms to standard
IEC 60034
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Electrical connection 1, number of pins/wires
15
Max. brake no-load speed
10000 1/min
Storage lifetime, under nominal conditions
20000 h
Cross inductivity Lq (phase)
8.2 mH
Thermal time constant
42 min
Type code
EMMT-AS
Nominal rotary speed
3000 1/min
Brake power consumption
11 W
Motor nominal current
2.2 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Brake mass moment of inertia
0.074 kgcm²
Permissible radial shaft load
350 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection 1, connection technology
M23x1
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Measuring flange
250 x 250 x 15 mm, steel
Max. winding temperature
155 °C
Brake coil inductivity
700 mH
Max. mechanical speed
16000 1/min
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal resistance
1.3 K/W
Rotor position sensor interface
EnDat® 22
Brake DC operating voltage
24 V
Winding inductance phase-phase
11 mH
Type of winding switch
Star inside
Ambient temperature
-15 °C ... 40 °C
Brake holding torque
2.5 Nm
Stall torque
1.15 Nm
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Electrical connection for input 1, connection pattern
00995913
Rotor position sensor for manufacturer designation
ECI 1118
Contamination level
2
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Brake current consumption
0.46 A
Max. brake friction work
5600 J
DC brake response delay
≤ 2 ms
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position encoder for absolutely detectable revolutions
1
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor nominal power
310 W
Phase-phase winding resistance
4.85 Ohm
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Total output inertia moment
0.373 kgcm²
Peak torque
3.4 Nm
Interface code, motor out
60P
Product weight
1850 g
MTTFd, subcomponent
380 years, rotor position sensor

5242210 Related Documents