5242206 Festo Servo Motors

Product Details

• Brake stopping current
  0.33 A
• Electrical connection for input 1, connection pattern
  00995913
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Certificate issuing authority
  UL E342973
• Max. installation height
  4000 m
• Max. mechanical speed
  16000 1/min
• DC brake response delay
  ≤ 2 ms
• Rotor position encoder for absolutely detectable revolutions
  1
• Rotor position sensor measuring principle
  Inductive
• Nominal rotary speed
  3000 1/min
• Motor nominal current
  2.2 A
• Winding inductance phase-phase
  11 mH
• Voltage constant, phase-to-phase
  32 mVmin
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Brake mass moment of inertia
  0.074 kgcm²
• Permissible axial shaft load
  70 N
• Interface code, motor out
  60P
• Detent torque
  < 1.0% of peak torque
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Balancing quality
G 2.5
Brake airflow
0.33 A
Brake coil inductivity
700 mH
Storage lifetime, under nominal conditions
20000 h
Max. brake friction work
5600 J
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal resistance
1.3 K/W
Rotor position sensor
Absolute encoder, single-turn
Brake power consumption
11 W
Motor nominal power
310 W
Type of winding switch
Star inside
Electrical connection 1, connection type
Hybrid plug
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Mounting position
Any
Contamination level
2
Max. winding temperature
155 °C
Rotor position encoder for DC operating voltage
5 V
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Motor type as per EN 60034-7
IM B5 IM V3
Electrical connection 1, number of pins/wires
15
Max. brake no-load speed
10000 1/min
Brake current consumption
0.46 A
Brake closing time
10 ms
Cross inductivity Lq (phase)
8.2 mH
Type code
EMMT-AS
Max. rotational speed
6800 1/min
Brake DC operating voltage
24 V
Phase-phase winding resistance
4.85 Ohm
Peak current
11 A
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Total output inertia moment
0.373 kgcm²
MTTFd, subcomponent
380 years, rotor position sensor
Conforms to standard
IEC 60034
Electrical connection 1, connection technology
M23x1
Rotor position sensor for manufacturer designation
ECI 1118
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Measuring flange
250 x 250 x 15 mm, steel
Brake coil resistance
52.4 Ohm
Number of pole pairs
5
Brake separation time
≤ 35 ms
Winding longitudinal inductivity Ld (phase)
7 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position encoder for positional values per revolution
262144
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal operating voltage DC
325 V
Nominal torque
1 Nm
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electric time constant
2.7 ms
Standstill torque constant
0.53 Nm/A
Thermal time constant
42 min
Rotor position sensor interface
EnDat® 22
Continuous stall current
2.5 A
Motor constants
0.45 Nm/A
Rotor position sensor resolution
18 bit
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Brake holding torque
2.5 Nm
Peak torque
3.4 Nm
Switching cycles, holding brake
10 million idle actuations (without friction work!)
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Relative air humidity
0 - 90 %
Degree of protection
IP40
Stall torque
1.15 Nm
Permissible radial shaft load
350 N
Product weight
1850 g

5242206 Related Documents