5242201 Festo Servo Motors

Product Details

• Electrical connection 1, connection technology
  M23x1
• Electrical connection for input 1, connection pattern
  00995913
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Electrical connection 1, connection type
  Hybrid plug
• Mounting position
  Any
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Certificate issuing authority
  UL E342973
• Number of pole pairs
  5
• Winding longitudinal inductivity Ld (phase)
  13 mH
• Rotor position encoder system accuracy angle measurement
  -120 arcsec ... 120 arcsec
• Type code
  EMMT-AS
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
• Motor nominal power
  200 W
• Peak current
  5.4 A
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Permissible radial shaft load
  350 N
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Measuring flange
  250 x 250 x 15 mm, steel
Max. winding temperature
155 °C
Rotor position encoder for DC operating voltage
5 V
Electric time constant
2.1 ms
Rotor position encoder for positional values per revolution
524288
Rotor position sensor
Absolute encoder, multi-turn
Rotor position sensor measuring principle
Inductive
Continuous stall current
1.7 A
Phase-phase winding resistance
11.7 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Relative air humidity
0 - 90 %
Ambient temperature
-15 °C ... 40 °C
Peak torque
1.6 Nm
MTTF, subcomponent
190 years, rotor position sensor
Detent torque
< 1.0% of peak torque
Rotor position sensor for manufacturer designation
EQI 1131
Contamination level
2
Balancing quality
G 2.5
Max. mechanical speed
16000 1/min
Standstill torque constant
0.49 Nm/A
Max. rotational speed
12500 1/min
Nominal operating voltage DC
565 V
Rotor position sensor resolution
19 bit
Voltage constant, phase-to-phase
29.9 mVmin
Thermal class according to EN 60034-1
F
Permissible axial shaft load
70 N
Conforms to standard
IEC 60034
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal time constant
40 min
Motor constants
0.41 Nm/A
Type of winding switch
Star inside
Storage temperature
-20 °C ... 70 °C
Nominal torque
0.64 Nm
Stall torque
0.7 Nm
Product weight
1180 g
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Electrical connection 1, number of pins/wires
15
Storage lifetime, under nominal conditions
20000 h
Cross inductivity Lq (phase)
15.5 mH
Rotor position encoder for absolutely detectable revolutions
4096
Thermal resistance
1.3 K/W
Rotor position sensor interface
EnDat® 22
Nominal rotary speed
3000 1/min
Motor nominal current
1.6 A
Winding inductance phase-phase
21 mH
Rating class according to EN 60034-1
S1
Degree of protection
IP40
Total output inertia moment
0.169 kgcm²
MTTFd, subcomponent
380 years, rotor position sensor
Interface code, motor out
60P

5242201 Related Documents