Powermatic Associates Logo

MBCC-4166 Banner Cordsets

MBCC-4166 on Powermatic Associates
Banner

Part#:MBCC-4166

Manufacturer:Banner

Alt. Part#:88505

Product Lifecycle:Active

Get a quick Quote!

Cordset: Single Ended 7/8 in; 4-pin Straight Female; 50.6 m 4x18 Black PVC Jacket; Nylon Black Coupling Nut

About the manufacturer: Banner is one of the manufacturers that offers Cordsets that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the MBCC-4166 Banner price in the box on the right side or send a quick quote.

Product Details

  • Weight
    335.204488 g
  • Country Of Origin
    TW
  • Feature: Hazardous Area
    No
  • Primary Number of Conductors
    4
  • Oil/Grease Resistant
    No
  • Secondary Connector Type
    Flying Leads
  • Primary AWG
    18
  • Primary Orientation
    Straight
  • Primary Gender
    Female
  • Primary Coupling Method
    7/8"-16
  • Current Rating (A)
    9.0
  • IP Rating
    IP67
  • Minimum Temp. (°C)
    -40
  • Primary Connector Type
    MINI
  • Voltage Rating (V)
    300 V ac/dc
  • Maximum Temp. (°C)
    105
  • Coupling Material/Color
    Nylon Black
  • Cable Jacket Material
    PVC
  • Trunk Length (m)
    No Trunk
  • Cordset Length (m)
    50.6
  • Number of Connectors
    1
  • Shield/No Shield
    No Shield
  • Outside Cable Diameter (mm)
    7
  • Connector Body Material/Color
    PUR Black
  • Cable Jacket Color
    Black
  • Number of Contacts
    4

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

MBCC-4166 Description

Banner Engineering MBCC-4166 is a pre-assembled cable/cordset designed with a single-ended configuration. It features black sheathing made from nylon for the coupling nut and PVC for the cable. This product measures 166ft / 50m in length and is equipped with a 4-pin 7/8"-16 mini female connector and bare end flying leads for connectivity. It is rated for a voltage of 300Vac and has a cable diameter of 7mm. The MBCC-4166 is designed to operate within an ambient air temperature range of -40 to +105°C and offers a degree of protection rated at IP67.

Manufacturer warranty

$556.00

Request a quote, and we will send availability within minutes.

Select Qty:

$556.00

$556.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17