Powermatic Associates Logo

HDL26110C Schneider Electric Electronic Components

HDL26110C on Powermatic Associates
Schneider Electric

Part#:HDL26110C

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact H Circuit Breaker,ThermMagn,110A,2P,600V,14kA

Product Details

  • Electrical Connection
    Lugs load Lugs line
  • Depth
    4.36 in (110.74 mm)
  • Continuous Current Rating
    100 %
  • Width
    2.74 in (69.60 mm)
  • Magnetic Hold Current
    900 A
  • Magnetic Tripping Current
    1700 A
  • Height
    6.4 in (162.56 mm)
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.15 in² (2.5…95 mm²) (AWG 14...AWG 3/0)
  • Breaking Capacity Code
    D
  • Line Rated Current
    110 A
  • Number Of Poles
    2P
  • Mounting Mode
    Unit mount
  • Product Or Component Type
    Circuit breaker
  • Range Of Product
    PowerPact H

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

HDL26110C Related Documents

Product Datasheet-1631033717456.pdf

Similar products from: Schneider Electric Electronic Components

LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
HDF36035 on Powermatic Associates

HDF36035

Schneider Electric

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 35A and offers thermal protection for overload and magnetic protection for short-circuit scenarios. This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It is designed for individual unit mount on plate with a Term. nut kit for fixed busbar connection on both line and load sides. The HDF36035 has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm, featuring an IP40 degree of protection. Its operating mode is manual toggle, with over-current protection settings fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 35 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

1 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

1 in stock

Manufacturer warranty

HDL26110C Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HDL26110C with other Electronic Components products

Electrical Connection

Depth

Continuous Current Rating

Width

Magnetic Hold Current

Magnetic Tripping Current

Height

Tightening Torque

Breaking Capacity Code

Line Rated Current

Selected product

HDL26110C
Backordered
HDL26110C
Schneider Electric

PowerPact H Circuit Breaker,ThermMagn,110A,2P,600V,14kA

Electrical ConnectionLugs load Lugs line

Depth4.36 in (110.74 mm)

Continuous Current Rating100 %

Width2.74 in (69.60 mm)

Magnetic Hold Current900 A

Magnetic Tripping Current1700 A

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Breaking Capacity CodeD

Line Rated Current110 A

HDF36035
1 in stock
HDF36035
Schneider Electric

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Depth-

Continuous Current Rating-

Width4.12 in (104.65 mm)

Magnetic Hold Current400 A

Magnetic Tripping Current850 A

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Breaking Capacity CodeD

Line Rated Current35 A

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Depth-

Continuous Current Rating-

Width4.12 in (104.65 mm)

Magnetic Hold Current400 A

Magnetic Tripping Current850 A

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Breaking Capacity CodeD

Line Rated Current50 A

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

HDL26050C on Powermatic Associates

HDL26050C

Verified stock: 0

Square D by Schneider Electric HDL26050C is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed as a PowerPact H-Frame 150 TMD 2P 50A 600Vac/250Vdc 14kA with lugs 100% rated for connections on both load and line sides. It features 2 poles (2P) and offers protection functions including thermal protection for overload and magnetic protection for short-circuit scenarios. The rated current is 50A, with a rated insulation voltage (Ui) of 750 V, and it operates at a rated voltage (AC) of 600Vac 600Y/347Vac and a rated voltage (DC) of 250Vdc. This circuit breaker is designed for individual unit mount on plate, has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm. It provides a degree of protection of IP40 and operates manually via a toggle. Protection settings are fixed, with over-current at 50A, short-circuit hold current at 400A, and short-circuit trip current at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 50 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies by voltage, including 25kA at 240Vac, 18kA at 480Vac, 18kA at 480Y/277Vac, 14kA at 600Vac, 14kA at 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

HDL26015 on Powermatic Associates

HDL26015

Verified stock: 0

Square D by Schneider Electric HDL26015 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed with a PowerPact H-Frame 150 TMD 2P 15A 600Vac/250Vdc 14kA with lugs on both load and line sides. This 2-pole circuit breaker features thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 15A, with a rated insulation voltage of 750 V, and operates at a rated voltage of 600Vac 600Y/347Vac for AC and 250Vdc for DC. The unit is designed for individual unit mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It offers a degree of protection of IP40 and operates via a toggle (manual) mechanism. The protection settings include over-current fixed at 15A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage is 690 V, with a rated impulse voltage of 8 kV. The trip current rating is 15 AT, with a frame current rating of 150 AF. It has a short circuit breaking rating of 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac for UL489, and 20kA at 250Vdc for UL489. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

HDL26020 on Powermatic Associates

HDL26020

Verified stock: 0

Square D by Schneider Electric HDL26020 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed as a PowerPact H-Frame 150 TMD 2P 20A 600Vac/250Vdc 14kA with lugs on both load and line sides for connection. This 2-pole (2P) circuit breaker features thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 20A, with a rated insulation voltage (Ui) of 750 V, and operates at rated voltages of 600Vac 600Y/347Vac and 250Vdc. The unit is designed for individual mounting on a plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It offers a degree of protection of IP40 and operates manually via a toggle. Protection settings include over-current fixed at 20A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 20 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HDL26025 on Powermatic Associates

HDL26025

Verified stock: 0

Square D by Schneider Electric HDL26025 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range. It features a PowerPact H-Frame 150 TMD 2P 25A 600Vac/250Vdc 14kA design with lugs on both load and line sides for connection. This 2-pole circuit breaker offers thermal protection for overload scenarios and magnetic protection against short-circuits. It has a rated current of 25A, with a rated insulation voltage (Ui) of 750 V and operates at a rated voltage (AC) of 600Vac 600Y/347Vac. Designed for individual unit mount on plate, it measures 163 mm in height, 104 mm in width, and 86 mm in depth, with a degree of protection of IP40. The operating mode is manual toggle, and it features fixed protection settings for over-current at 25A, short-circuit hold current at 350A, and short-circuit trip current at 750A. Its rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 25 AT, and it has a frame current rating of 150 AF. The short circuit breaking rating varies with voltage, up to 25kA at 240Vac and down to 14kA at 600Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HDL26070 on Powermatic Associates

HDL26070

Verified stock: 0

Square D by Schneider Electric HDL26070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed with a PowerPact H-Frame 150 TMD 2P 70A 600Vac/250Vdc 14kA with lugs at 80% rated for both load and line sides. This 2-pole (2P) circuit breaker features thermal protection for overload scenarios and magnetic protection for short-circuit conditions. It has a rated current of 70A, with a rated insulation voltage (Ui) of 750 V, and operates at a rated voltage (AC) of 600Vac 600Y/347Vac. The device is designed for individual unit mount on plate, with a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm. It offers a degree of protection of IP40 and operates manually via a toggle. The protection settings include over-current fixed at 70A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 70 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all under UL489. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact H Circuit Breaker,ThermMagn,110A,2P,600V,14kA

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock