HDL26045C Schneider Electric Electronic Components

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

Manufacturer warranty

HDL26045C Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HDL26045C with other Electronic Components products

Electrical Connection

Width

Depth

Height

Continuous Current Rating

Tightening Torque

Magnetic Hold Current

Number Of Poles

Product Or Component Type

Magnetic Tripping Current

Selected product

Backordered

HDL26045C

Schneider Electric

Circuit breaker, PowerPacT H, thermal magnetic, unit mount, 45A, 2 pole, 14kA, 600 VAC, 100% rated

Electrical ConnectionLugs load Lugs line

Width2.74 in (69.60 mm)

Depth4.36 in (110.74 mm)

Height6.4 in (162.56 mm)

Continuous Current Rating100 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Hold Current400 A

Number Of Poles2P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current850 A

7 in stock

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Width-

Depth-

Height5.39 in (137 mm)

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Hold Current-

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current-

7 in stock

HDF36050

Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Width-

Depth-

Height6.4 in (162.56 mm)

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Hold Current400 A

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current850 A

7 in stock

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Width-

Depth-

Height5.39 in (137 mm)

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Hold Current-

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current-

7 in stock

HDF36050

Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Width-

Depth-

Height6.4 in (162.56 mm)

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Hold Current400 A

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current850 A

7 in stock

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Width-

Depth-

Height5.39 in (137 mm)

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Hold Current-

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current-

About the manufacturer

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Relevant products

HDL26025

Square D by Schneider Electric HDL26025 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range. It features a PowerPact H-Frame 150 TMD 2P 25A 600Vac/250Vdc 14kA design with lugs on both load and line sides for connection. This 2-pole circuit breaker offers thermal protection for overload scenarios and magnetic protection against short-circuits. It has a rated current of 25A, with a rated insulation voltage (Ui) of 750 V and operates at a rated voltage (AC) of 600Vac 600Y/347Vac. Designed for individual unit mount on plate, it measures 163 mm in height, 104 mm in width, and 86 mm in depth, with a degree of protection of IP40. The operating mode is manual toggle, and it features fixed protection settings for over-current at 25A, short-circuit hold current at 350A, and short-circuit trip current at 750A. Its rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 25 AT, and it has a frame current rating of 150 AF. The short circuit breaking rating varies with voltage, up to 25kA at 240Vac and down to 14kA at 600Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HDL26070

Square D by Schneider Electric HDL26070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed with a PowerPact H-Frame 150 TMD 2P 70A 600Vac/250Vdc 14kA with lugs at 80% rated for both load and line sides. This 2-pole (2P) circuit breaker features thermal protection for overload scenarios and magnetic protection for short-circuit conditions. It has a rated current of 70A, with a rated insulation voltage (Ui) of 750 V, and operates at a rated voltage (AC) of 600Vac 600Y/347Vac. The device is designed for individual unit mount on plate, with a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm. It offers a degree of protection of IP40 and operates manually via a toggle. The protection settings include over-current fixed at 70A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 70 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all under UL489. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HDL26015C

Square D by Schneider Electric HDL26015C is a moulded case circuit breaker (MCCB) within the PowerPacT HDL sub-range, designed with a PowerPact H-Frame 150 TMD 2P 15A 600Vac/250Vdc 14kA with lugs 100% rated for connections on both load and line sides. It features 2 poles (2P) and offers protection functions including thermal protection for overload and magnetic protection for short-circuit scenarios. The rated current is 15A, with a rated insulation voltage (Ui) of 750 V, and it supports a rated voltage (AC) of 600Vac 600Y/347Vac. This unit is designed for individual unit mount on plate, with a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm. It provides a degree of protection of IP40 and operates via a toggle (manual) mechanism. Protection settings are over-current fixed at 15A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 15 AT, with a frame current rating of 150 AF. It has a short circuit breaking rating of 25kA (240Vac; UL489), 18kA (480Vac; UL489), 18kA (480Y/277Vac; UL489), 14kA (600Vac; UL489), 14kA (600Y/347Vac; UL489), and 20kA (250Vdc; UL489). The trip unit type is thermal-magnetic (fixed) with no display, and it falls under the utilisation category A.

Schneider Electric

HDL26050C

Square D by Schneider Electric HDL26050C is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed as a PowerPact H-Frame 150 TMD 2P 50A 600Vac/250Vdc 14kA with lugs 100% rated for connections on both load and line sides. It features 2 poles (2P) and offers protection functions including thermal protection for overload and magnetic protection for short-circuit scenarios. The rated current is 50A, with a rated insulation voltage (Ui) of 750 V, and it operates at a rated voltage (AC) of 600Vac 600Y/347Vac and a rated voltage (DC) of 250Vdc. This circuit breaker is designed for individual unit mount on plate, has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm. It provides a degree of protection of IP40 and operates manually via a toggle. Protection settings are fixed, with over-current at 50A, short-circuit hold current at 400A, and short-circuit trip current at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 50 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies by voltage, including 25kA at 240Vac, 18kA at 480Vac, 18kA at 480Y/277Vac, 14kA at 600Vac, 14kA at 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

HDL26015

Square D by Schneider Electric HDL26015 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed with a PowerPact H-Frame 150 TMD 2P 15A 600Vac/250Vdc 14kA with lugs on both load and line sides. This 2-pole circuit breaker features thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 15A, with a rated insulation voltage of 750 V, and operates at a rated voltage of 600Vac 600Y/347Vac for AC and 250Vdc for DC. The unit is designed for individual unit mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It offers a degree of protection of IP40 and operates via a toggle (manual) mechanism. The protection settings include over-current fixed at 15A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage is 690 V, with a rated impulse voltage of 8 kV. The trip current rating is 15 AT, with a frame current rating of 150 AF. It has a short circuit breaking rating of 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac for UL489, and 20kA at 250Vdc for UL489. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

HDL26020

Square D by Schneider Electric HDL26020 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, designed as a PowerPact H-Frame 150 TMD 2P 20A 600Vac/250Vdc 14kA with lugs on both load and line sides for connection. This 2-pole (2P) circuit breaker features thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 20A, with a rated insulation voltage (Ui) of 750 V, and operates at rated voltages of 600Vac 600Y/347Vac and 250Vdc. The unit is designed for individual mounting on a plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It offers a degree of protection of IP40 and operates manually via a toggle. Protection settings include over-current fixed at 20A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 20 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HDL26025

Schneider Electric

HDL26070

Schneider Electric

HDL26015C

Schneider Electric

HDL26050C

Schneider Electric

HDL26015

Schneider Electric

HDL26020

Schneider Electric

HDL26025

Schneider Electric

HDL26070

Schneider Electric

HDL26015C

Schneider Electric

FAQ

Out if stock but available for backorder.

Circuit breaker, PowerPacT H, thermal magnetic, unit mount, 45A, 2 pole, 14kA, 600 VAC, 100% rated

Recommended parts

ZBVB5

Schneider Electric

Schneider Electric ZBVB5 is a light unit designed as a light block with an integral LED. It features a degree of protection rated at IP20 and operates on a network frequency of 50/60 Hz. This unit is compatible with a supply voltage of 24 V, available in both AC and DC formats. The light emitted by the ZBVB5 is orange, and it is equipped with screw-clamp type terminals for secure connections.

ZB5AK1243

Schneider Electric

Schneider Electric ZB5AK1243 is a round, illuminated head designed for integral LED use with a standard handle, part of the XB5 sub-range. It features a plastic body and bezel, with a diameter of 22 mm and dimensions of 29 mm in height and width, and 43 mm in depth. This part offers a red light color and operates in a 2-position stay-put mode with angular positions at 0 and 90 degrees. It boasts a mechanical durability of 1,000,000 operations at no load and is equipped with a degree of protection rated at IP69K, NEMA 4X, and NEMA 13, ensuring its capability to withstand demanding environmental conditions.

FP0-TC4

Panasonic

FP0 Thermocouple Unit, 4 IN, J, K, T and

4 in stock

E3X-DA11-S

Omron

OBSOLETE

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

QS18VP6FF100Q8

Banner

WORLD-BEAM QS18 Series: Fixed-Field; Range: 100 mm cutoff; Output: Complementary Solid-State PNP; M12 Integral QD

8 in stock

ZBVB5

Schneider Electric

ZB5AK1243

Schneider Electric

PAXT0010

Red Lion

ZBVB5

Schneider Electric

ZB5AK1243

Schneider Electric