CP20.241-R1 Puls AC/DC Power Supplies

Out if stock but available for backorder.

PULS CP20.241-R1 is a DIN rail mounting power supply unit housed in an aluminium casing, designed to operate within an ambient air temperature range of -40 to +70°C. It features a net width of 48 mm and offers a degree of protection rated at IP20. This unit consumes current at rates of 2.25A with a 230Vac input, 4.28A with a 120Vac input, 5.17A with a 100Vac input, and 4.64A with a 110Vdc input for a 24Vdc / 10A output, with peak inrush currents of 5.5A at 230Vac input and 12A at 120Vac input. It boasts an efficiency of 0.952 at 230Vac input and 0.938 at 120Vac input. The dimensions of this power supply are W48mm x H124mm x D127mm. It has a 450ms start-up delay for 100-230Vac input, with rise times of 145ms and 160ms under specified conditions. The CP20.241-R1 includes protection functions such as output overvoltage protection and overload/short-circuit protection, with capabilities for series or parallel operation for increased output voltages or power. It is resistant to back-feeding loads up to 35V. Power dissipation losses are 24.2 W and 31.7 W for 230Vac and 120Vac inputs respectively, with an output stage capacitance of 8000 µF. Electrical durability ranges from 25,000 to 465,000 hours under various conditions. The ripple is specified at 100mVpp. This AC/DC power supply unit, part of the CP-series, is designed with built-in decoupling MOSFET for redundancy, ATEX approval, and features a 20% power reserve, DC-OK relay contact output, and spring-clamp connections. It supports a supply voltage range of 88Vdc-180Vdc and 85Vac-264Vac, with specific tolerances for overvoltage and shutdown voltages. The rated current is 24A at 48Vdc in temperatures up to +45°C, with derating at higher temperatures. It is suitable for single-phase (1AC) or DC networks, providing a rated power of 576W at temperatures up to +45°C, and features a fixed 24Vdc output voltage with a 1000mV turn-ON overshoot and a hold time of 32ms.