8118274 Festo Electric Actuators

Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Additional functions
  User interface Integrated end-position sensing
• Power supply, connection pattern
  00995989
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Power supply, number of pins/wires
  4
• Nominal current
  3 A
• IO-Link®, protocol version
  Device V 1.1
• Size
  32
• Piston rod thread
  M8
• Max. angle of rotation of the piston rod +/-
  1 deg
• Spindle type
  Ball screw drive
• Insulation protection class
  B
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Degree of protection
  IP40
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• DC nominal voltage
  24 V
• Number of digital logic inputs
  2
• Product weight
  1298 g
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
Reversing backlash
100 µm
Piston rod end
External thread
Homing
Fixed stop block positive Reference switch
Max. speed
0.21 m/s
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mz
1.5 Nm
Guide value for payload, vertical
9 kg
Basic weight with 0 mm stroke
818 g
Spindle material
Roller bearing steel
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Rotor position sensor resolution
16 bit
IO-Link®, process data width IN
2 Byte
IO-Link®, data memory required
500 byte
Stroke
200 mm
Motor type
Stepper motor
Symbol
00997294
Rotor position sensor
Absolute encoder, single-turn
Max. acceleration
5 m/s²
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark
Max. torque My
1.5 Nm
Additional weight per 10 mm stroke
24 g
Display
LED
Parameterization interface
IO-Link® User interface
Characteristics of logic input
Configurable Not galvanically isolated
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Number of digital logic outputs 24 V DC
2
Work range of logic input
24 V
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, minimum cycle time
1 ms
Spindle pitch
8 mm/U
Type code
EPCS
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor measuring principle
Magnetic
Permissible voltage fluctuations
+/- 15 %
Max. torque Mx
0 Nm
Moving mass at 0 mm stroke
98 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. cable length
15 m outputs 20 m for IO-Link® operation
Ready status indication
LED
Logic interface, connection pattern
00992264
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires
8
Max. current consumption
3000 mA
IO-Link®, SIO mode support
Yes
IO-Link®, port class
A
IO-Link®, number of ports
1
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke reserve
0 mm
Screw diameter
8 mm
Mounting position
Any
Design
Electric actuator With integrated drive
Duty cycle
100%
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
0 °C ... 50 °C
Max. radial force on actuator shaft
75 N
Guide value for payload, horizontal
24 kg
Piston rod material
High-alloy stainless steel
Housing material
Wrought aluminum alloy, smooth-anodized
Max. feed force Fx
150 N
Type of mounting
With internal thread With accessories
Additional moving mass per 10 mm stroke
3.3 g
Spindle nut material
Steel

8118274 Related Documents