8118269 Festo Electric Actuators

Product Details

• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Ready status indication
  LED
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• DC nominal voltage
  24 V
• Number of digital logic outputs 24 V DC
  2
• Rotor position sensor resolution
  16 bit
• Nominal current
  3 A
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, number of ports
  1
• Size
  32
• Type code
  EPCS
• KC characters
  KC EMC
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection pattern
  00995989
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, number of poles/wires
  8
• Work range of logic input
  24 V
• Max. current consumption
  3000 mA
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
IO-Link®, data memory required
500 byte
Screw diameter
8 mm
Mounting position
Any
Symbol
00997294
Rotor position sensor
Absolute encoder, single-turn
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. radial force on actuator shaft
75 N
Moving mass at 0 mm stroke
98 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Display
LED
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Number of digital logic inputs
2
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
Reversing backlash
100 µm
Max. angle of rotation of the piston rod +/-
1 deg
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Max. speed
0.079 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. torque Mx
0 Nm
Guide value for payload, horizontal
24 kg
Basic weight with 0 mm stroke
818 g
Spindle nut material
Steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Additional functions
User interface Integrated end-position sensing
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Power supply, number of pins/wires
4
IO-Link®, SIO mode support
Yes
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke
150 mm
Piston rod thread
M8
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Reference switch
Repetition accuracy
±0.02 mm
Relative air humidity
0 - 90 % Non-condensing
Max. torque My
1.5 Nm
Max. torque Mz
1.5 Nm
Additional weight per 10 mm stroke
24 g
Type of mounting
With internal thread With accessories
Spindle type
Ball screw drive
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Logic input specification
Based on IEC 61131-2, type 1
Parameterization interface
IO-Link® User interface
Logic interface, connection pattern
00992264
Logic interface, connection type
Plug
Product weight
1178 g
IO-Link®, port class
A
IO-Link®, minimum cycle time
1 ms
Stroke reserve
0 mm
Spindle pitch
3 mm/U
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Storage temperature
-20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Max. feed force Fx
150 N
Housing material
Wrought aluminum alloy, smooth-anodized
Piston rod material
High-alloy stainless steel
Max. acceleration
1.5 m/s²
Insulation protection class
B
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Guide value for payload, vertical
12 kg
Additional moving mass per 10 mm stroke
3.3 g
Spindle material
Roller bearing steel

8118269 Related Documents