567798 Festo Directional Control Valves

Product Details

• Type code
  MHJ10
• Type of control
  Direct
• Additional functions
  Spark suppression Safety shut-down
• Max. switching frequency
  500 Hz
• DC operating voltage range
  21.6 V ... 26.4 V
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Storage temperature
  -20 °C ... 50 °C
• Type of mounting
  Optionally: With through-hole
• Material of cable sheath
  PUR
• Valve function
  2/2, closed, monostable
• Operating pressure
  0.5 bar ... 4 bar
• Degree of protection
  IP65
• Information on operation
  Power supply unit must be able to supply at least 1.7 A without voltage drop. For block assembly with flow rate at max. ambient temperature 45 °C.
• Flow direction
  Non-reversible
• Reverse polarity protection
  for operating voltage
• Trigger signal range DC
  3 V ... 30 V
• Permissible voltage fluctuations
  +/- 10 %
• Restricted ambient and media temperature
  Depending on the switching frequency (see diagram)
• Ambient temperature
  -5 °C ... 60 °C
• Electrical connection
  3-wire Cable
Seals material
HNBR
Input resistance
34 kOhm
Standard nominal flow rate
160 l/min
Certification
RCM compliance mark
Width dimension
10.5 mm
Manual override
None
b-value
0.36
Switching time on at 0.5 bar and 24 V in new condition
0.8 ms
Duty cycle
100%
Coil characteristics
24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
Permissible solenoid surface temperature
120 °C
Product weight
85 g
Cable length
2.5 m
Note on input current
Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
Actuation type
Electrical
Pneumatic working port
QS-6
Design
Poppet valve without return spring
Sealing principle
Hard
Symbol
00992259
Switching time on at 4 bar and 24 V in new condition
1 ms
Switching time off at 0.5 bar and 24 V in new condition
0.6 ms
Information on operating and pilot media
Operation with oil lubrication not possible
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
CE marking (see declaration of conformity)
As per EU EMC directive
Pneumatic connection 2
QS-6
Housing material
PA-reinforced PPS-reinforced
KC characters
KC EMC
Width
10 mm
Operating voltage
24V DC
Reset method
Pneumatic spring
Mounting position
Any
C value
0.66 l/sbar
Switching time off at 4 bar and 24 V in new condition
0.5 ms
Tolerance for switching time off
+15 %/-25 %
Tolerance for ON switching time
+/-15 %
Temperature of medium
-5 °C ... 60 °C
Pneumatic connection 1
QS-6
Note on materials
RoHS-compliant
Material of screws
Steel

567798 Related Documents