547169 Festo Directional Control Valves

Product Details

• Operating voltage
  110V AC
• Type code
  VSVA
• Actuation type
  Electrical
• Pilot pressure MPa
  0.3 MPa ... 1 MPa
• Reset method
  Pneumatic spring
• Nominal width
  5 mm
• Type of control
  Pilot-controlled
• Flow rate of pneumatic valve on individual sub-base
  450 l/min
• Permissible voltage fluctuations
  -15 % / +10 %
• Relative air humidity
  0 - 90 %
• Valve function
  2x3/2, closed, monostable
• Design
  Piston gate valve
• Degree of protection
  IP65 NEMA 4
• Sealing principle
  Soft
• Pilot air supply port
  Internal
• Pilot pressure
  3 bar ... 10 bar
• Duty cycle
  100%
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Noise level
  85 dB(A)
• Electrical connection
  Form C as per DIN EN 175301-803
Pneumatic connection 2
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 4
Sub-base, size 18 mm as per ISO 15407-1
Seals material
HNBR NBR
Operating pressure
2 bar ... 10 bar
Standard nominal flow rate
400 l/min
Exhaust air function
With flow control option
Flow direction
Non-reversible
Switching time off
21 ms
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Temperature of medium
-5 °C ... 50 °C
Max. tightening torque for valve mounting
1 Nm
Type of mounting
On sub-base
Pneumatic connection 3
Sub-base, size 18 mm as per ISO 15407-1
Lap
Overlap
Valve size
18 mm
Pneumatic working port
Sub-base, size 18 mm as per ISO 15407-1 G1/8
Mounting position
Any
Manual override
Non-detenting
Symbol
00991805
Flow rate of pneumatic valve
600 l/min
On switching time
13 ms
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-5 °C ... 50 °C
Auxiliary pilot air port 14
Sub-base, size 18 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Conforms to standard
ISO 15407-1 VDMA 24563
Signal status display
LED
Optimized flow rate of pneumatic valve pneumatically concatenated flow
400 l/min
Coil characteristics
110 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
CE marking (see declaration of conformity)
As per EU low voltage directive
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Product weight
174 g
Pneumatic connection 1
Sub-base, size 18 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Material of screws
Steel Galvanized
Auxiliary pilot air port 12
Sub-base, size 18 mm as per ISO 15407-1
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Pneumatic connection 5
Sub-base, size 18 mm as per ISO 15407-1
Housing material
Die-cast aluminum

547169 Related Documents