538282 Festo Proximity Sensors

Name: 538282
Brand: Festo

Part#:538282

Manufacturer:Festo

Alt. Part#:SIED-M18B-ZO-K-L

Product Lifecycle:Active

Get a quick Quote!

proximity sensor SIED-M18B-ZO-K-L With cable, flush mounting Design: Round, Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * to EU directive lo

About the manufacturer: Festo is one of the manufacturers that offers Proximity Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 538282 Festo price in the box on the right side or send a quick quote.

Product Details

Design
Round
Symbol
00992846
Certification
RCM compliance mark c UL us - Listed (OL)
Reduction factors
Aluminum = 0.4 Steel St 37 = 1.0
Switching element function
N/C contact
Minimum load current
5 mA
Short-circuit protection
no
Insulating sheath material
PVC
Tightening torque
30 Nm
Mounting type
Flush
Selection of sensor version
Standard
Type code
SIED
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Ambient temperature
-25 °C ... 85 °C
Hysteresis
0.04 mm ... 1.15 mm
Operating voltage range AC
20 V ... 265 V
Cable length
2.5 m
Degree of protection
IP67
Conforms to standard
EN 60947-5-2
Note on materials
Free of copper and PTFE

Repetition accuracy

0.15 mm

Max. switching frequency DC

490 Hz

Max. switching frequency AC

25 Hz

Mains frequency

50 Hz

Electrical connection

2-wire Cable

Type of mounting

With lock nut

Switching status indication

LED yellow

Ambient temperature with flexible cable installation

-5 °C ... 50 °C

Measuring principle

Inductive

Rated operating distance

5 mm

Voltage drop

≤ 8 V

Idle current

≤ 1.5 mA

Size

M18

Product weight

110 g

Electrical output

Non-contact, 2-wire

Assured operating distance

4.05 mm

Switching output

Non-contact, 2-wire

Max. output current

300 mA

DC operating voltage range

20 V ... 320 V

Reverse polarity protection

for all electrical connections

Material of cable sheath

TPE-U(PUR)

Housing material

Brass Nickel-plated

Corrosion resistance class (CRC)

1 - Low corrosion stress

Selection of additional sensor information

For direct and alternating voltage

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric