Powermatic Associates Logo

538255 Festo Proximity Sensors

538255 on Powermatic Associates
Festo

Part#:538255

Alt. Part#:SIEH-M18B-PS-S-L-CR

Manufacturer:Festo

Category:Proximity Sensors

Product Lifecycle:Active

Product description

proximity sensor SIEH-M18B-PS-S-L-CR Inductive, for large switching distances. Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): to EU directive for EMC, Materials note: Free

Product Details

  • Conforms to standard
    EN 60947-5-2
  • Note on materials
    Free of copper and PTFE
  • Hysteresis
    ≤ 1.22 mm
  • Residual ripple
    20 %
  • Mounting type
    Flush
  • Switching status indication
    LED yellow
  • Selection of sensor version
    Fully stainless steel housing
  • Certification
    RCM compliance mark c UL us - Listed (OL)
  • Assured operating distance
    8.1 mm
  • Reproducibility, switching value FS
    0.5 mm
  • Inductive protective circuit
    Installed and switching frequency < 10 Hz
  • Electrical connection
    3-pin Plug
  • Ambient temperature with flexible cable installation
    -5 °C ... 70 °C
  • Resistance to sensor fitting pressure
    60 bar
  • Type code
    SIEH
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Rated operating distance
    10 mm
  • Switching element function
    N/O contact
  • Short-circuit protection
    Pulsed
  • Idle current
    < 12 mA
  • Product weight
    53 g
  • Degree of protection
    IP67 IP69K
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Ambient temperature
    -25 °C ... 70 °C
  • Max. switching frequency
    200 Hz
  • DC operating voltage range
    10 V ... 30 V
  • Size
    M18
  • Type of mounting
    With lock nut
  • Selection of additional sensor information
    With increased switching distance
  • Symbol
    00991701
  • Reduction factors
    Aluminum = 1.0 Steel St 37 = 1.0
  • Switching output
    PNP
  • Max. output current
    200 mA
  • Voltage drop
    2 V
  • Reverse polarity protection
    for all electrical connections
  • Housing material
    High-alloy steel
  • Electrical output
    PNP

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

538255 Related Documents

538255 DataSheet.pdf

Similar products from: Festo Proximity Sensors

551369 on Powermatic Associates

551369

Festo

proximity sensor SME-10M-ZS-24V-E-2,5-L-OE Suitable for C-slot. Design: for round slot, Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): to EU directive for EMC, Special cha

2 in stock
551401 on Powermatic Associates

551401

Festo

proximity sensor SIES-8M-NO-24V-K-7,5-OE inductive, with cable, can be flush-mounted, N/C function Design: for T-slot, Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): to EU

1 in stock
551377 on Powermatic Associates

551377

Festo

proximity sensor SMT-10M-NS-24V-E-2,5-L-OE Magnetic, contactless, for C-slot. Design: for round slot, Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for

8 in stock
526622 on Powermatic Associates

526622

Festo

proximity sensor SME-8-SL-LED-24 Electric, with reed contact, for drives with T-slot, with M8 plug. Design: for T-slot, Conforms to standard: EN 60947-5-2, Authorisation: RCM Mark, CE mark (see declaration of conformity): to EU directive for EMC, Material

12 in stock
175404 on Powermatic Associates

175404

Festo

proximity sensor SME-8-K5-LED-24 Electric, with reed contact, for drives with T-slot, with cable. Design: for T-slot, Conforms to standard: EN 60947-5-2, Authorisation: RCM Mark, CE mark (see declaration of conformity): to EU directive for EMC, Materials

1 in stock
150847 on Powermatic Associates

150847

Festo

proximity sensor SMEO-1-S-24-B With reed switch, without mounting kit. Design: Block design, Materials note: Free of copper and PTFE, Measuring principle: Reed magnetic, Ambient temperature: -20 - 70 °C, Switch output: with contact, bipolar

1 in stock

Manufacturer warranty

538255 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 538255 with other Proximity Sensors products

Conforms to standard

Note on materials

Hysteresis

Residual ripple

Mounting type

Switching status indicati...

Selection of sensor versi...

Certification

Assured operating distanc...

Reproducibility, switchin...

Selected product

538255
Backordered
538255
Festo

proximity sensor SIEH-M18B-PS-S-L-CR Inductive, for large switching distances. Conforms to standard:...

Conforms to standardEN 60947-5-2

Note on materialsFree of copper and PTFE

Hysteresis≤ 1.22 mm

Residual ripple20 %

Mounting typeFlush

Switching status indicationLED yellow

Selection of sensor versionFully stainless steel housin...

CertificationRCM compliance mark c UL us ...

Assured operating distance8.1 mm

Reproducibility, switching value FS0.5 mm

551391
2 in stock
551391
Festo

proximity sensor SIES-8M-PO-24V-K-7,5-OE inductive, with cable, can be flush-mounted, N/C function D...

Conforms to standardEN 60947-5-2

Note on materialsFree of copper and PTFE RoHS...

Hysteresis-

Residual ripple-

Mounting type-

Switching status indication-

Selection of sensor version-

CertificationRCM compliance mark c UL us ...

Assured operating distance-

Reproducibility, switching value FS-

551401
1 in stock
551401
Festo

proximity sensor SIES-8M-NO-24V-K-7,5-OE inductive, with cable, can be flush-mounted, N/C function D...

Conforms to standardEN 60947-5-2

Note on materialsFree of copper and PTFE RoHS...

Hysteresis-

Residual ripple-

Mounting type-

Switching status indication-

Selection of sensor version-

CertificationRCM compliance mark c UL us ...

Assured operating distance-

Reproducibility, switching value FS-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock
CRDSNU-20-72-P-A-CS on Powermatic Associates

CRDSNU-20-72-P-A-CS

Festo

Festo CRDSNU-20-72-P-A-CS is a pneumatic cylinder designed for mounting via accessories, featuring a high-alloy stainless steel cylinder barrel, cover, and piston rod. It operates within an ambient air temperature range of 0°C to +80°C and has a round cylindrical shape. This stainless steel double-acting single-ended round ISO pneumatic air cylinder falls under the CRDSNU series, with a design based on ISO6432. It includes built-in magnet elastic cushioning at both ends for unlubricated operation and allows for position sensing via a proximity sensor. The cylinder is double-acting, utilizing compressed air as per ISO8573-1;2010 [7;4;4] standards. It features an M8 male threaded rod and a 1/8" BSPP / G1/8" threaded pneumatic port for connections. The operating pressure range is +1 to +10bar, with a bore size of 20mm and a stroke length of 72mm.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

proximity sensor SIEH-M18B-PS-S-L-CR Inductive, for large switching distances. Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): to EU directive for EMC, Materials note: Free

Similar products from: Proximity Sensors

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock
538255 Festo - Proximity Sensors | Powermatic Associates