525115 Festo Directional Control Valves

Product Details

• Lap
  Underlap
• Standard nominal flow rate
  90 l/min
• Degree of protection
  IP65
• Reset method
  Mechanical spring
• Type code
  MH2
• Reverse polarity protection
  Bipolar
• Switching time off
  1.7 ms
• Switching time variation at 1 Hz and above
  0.2 ms
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Product weight
  70 g
• Electrical connection
  Cable
• Nominal width
  2 mm
• Actuation type
  Electrical
• KC characters
  KC EMC
• Pneumatic working port
  M7
• Design
  Pressure-relieved poppet valve
• Width dimension
  14 mm
• Exhaust air function
  With flow control option
• Manual override
  Non-detenting
Symbol
00991129
Flow direction
Non-reversible
Tolerance for switching time off
+10 %/-30 %
Duty cycle
100%
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Ambient temperature
-5 °C ... 60 °C
Pneumatic connection 4
M7
Note on materials
Free of copper and PTFE RoHS-compliant
Operating pressure
-0.9 bar ... 8 bar
Certification
RCM compliance mark c UL us - Recognized (OL)
Mounting position
Any
Max. switching frequency
300 Hz
On switching time
1.9 ms
Tolerance for ON switching time
+10%/-30%
Coil characteristics
24 V DC: low-current phase 1.625 W, high-current phase 6.5 W
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Temperature of medium
-5 °C ... 60 °C
Type of mounting
With through-hole
Pneumatic connection 1
M7
Housing material
Die-cast zinc Coated
Valve function
5/2, monostable
Width
10 mm
Operating voltage
24V DC
Sealing principle
Soft
Type of control
Direct
Additional functions
Spark suppression Protective circuit
Permissible voltage fluctuations
+/- 10 %
CE marking (see declaration of conformity)
As per EU EMC directive
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Max. tightening torque of pneumatic fitting
2 Nm
Pneumatic connection 3
M7
Pneumatic connection 5
M7
Material of cable sheath
PUR
Cable length
2.5 m
Pneumatic connection 2
M7
Seals material
HNBR NBR
Material of screws
Steel Galvanized

525115 Related Documents