5242218 Festo Servo Motors

Product Details

• Electrical connection 1, connection technology
  M23x1
• Rotor position sensor for manufacturer designation
  ECI 1118
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Max. winding temperature
  155 °C
• Brake coil inductivity
  700 mH
• Number of pole pairs
  5
• Cross inductivity Lq (phase)
  5 mH
• Rotor position encoder for absolutely detectable revolutions
  1
• Thermal time constant
  44 min
• Rotor position sensor interface
  EnDat® 22
• Brake power consumption
  11 W
• Motor nominal power
  410 W
• Winding inductance phase-phase
  7 mH
• Rating class according to EN 60034-1
  S1
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Brake mass moment of inertia
  0.074 kgcm²
• Interface code, motor out
  60P
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Certificate issuing authority
  UL E342973
Brake coil resistance
52.4 Ohm
Storage lifetime, under nominal conditions
20000 h
Brake separation time
≤ 35 ms
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder for positional values per revolution
262144
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal operating voltage DC
565 V
Rotor position sensor resolution
18 bit
Peak current
18.3 A
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Brake holding torque
2.5 Nm
Permissible axial shaft load
70 N
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Conforms to standard
IEC 60034
Detent torque
< 1.0% of peak torque
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Motor type as per EN 60034-7
IM B5 IM V3
Max. brake no-load speed
10000 1/min
Brake current consumption
0.46 A
Brake closing time
10 ms
Electric time constant
3 ms
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position sensor measuring principle
Inductive
Motor constants
0.44 Nm/A
Motor nominal current
3 A
Voltage constant, phase-to-phase
31.2 mVmin
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Nominal torque
1.3 Nm
Permissible radial shaft load
350 N
MTTFd, subcomponent
380 years, rotor position sensor
Electrical connection for input 1, connection pattern
00995913
Contamination level
2
Balancing quality
G 2.5
Electrical connection 1, number of pins/wires
15
Max. installation height
4000 m
Max. mechanical speed
16000 1/min
Max. brake friction work
5600 J
Winding longitudinal inductivity Ld (phase)
4.2 mH
Thermal resistance
1.2 K/W
Rotor position sensor
Absolute encoder, single-turn
Nominal rotary speed
3000 1/min
Brake DC operating voltage
24 V
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Peak torque
5.6 Nm
Product weight
2230 g
Electrical connection 1, connection type
Hybrid plug
Mounting position
Any
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Measuring flange
250 x 250 x 15 mm, steel
Brake airflow
0.33 A
Rotor position encoder for DC operating voltage
5 V
Brake stopping current
0.33 A
DC brake response delay
≤ 2 ms
Standstill torque constant
0.52 Nm/A
Type code
EMMT-AS
Max. rotational speed
11900 1/min
Continuous stall current
3.5 A
Phase-phase winding resistance
2.68 Ohm
Relative air humidity
0 - 90 %
Total output inertia moment
0.49 kgcm²
Stall torque
1.56 Nm
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

5242218 Related Documents