5242208 Festo Servo Motors

Product Details

• Electrical connection 1, connection technology
  M23x1
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Max. winding temperature
  155 °C
• Mounting position
  Any
• Motor type as per EN 60034-7
  IM B5 IM V3
• Rotor position encoder for DC operating voltage
  5 V
• Winding longitudinal inductivity Ld (phase)
  7 mH
• Type code
  EMMT-AS
• Rotor position sensor interface
  EnDat® 22
• Motor nominal current
  2.4 A
• Voltage constant, phase-to-phase
  32 mVmin
• Relative air humidity
  0 - 90 %
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Stall torque
  1.24 Nm
• MTTFd, subcomponent
  380 years, rotor position sensor
• Interface code, motor out
  60P
• Detent torque
  < 1.0% of peak torque
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Balancing quality
G 2.5
Certificate issuing authority
UL E342973
Max. mechanical speed
16000 1/min
Cross inductivity Lq (phase)
8.2 mH
Thermal resistance
1.1 K/W
Rotor position sensor measuring principle
Inductive
Continuous stall current
2.7 A
Rotor position sensor resolution
18 bit
Peak current
11 A
Degree of protection
IP40
Peak torque
3.4 Nm
Electrical connection for input 1, connection pattern
00995913
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Measuring flange
250 x 250 x 15 mm, steel
Electrical connection 1, number of pins/wires
15
Electric time constant
2.7 ms
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor constants
0.45 Nm/A
Winding inductance phase-phase
11 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Total output inertia moment
0.286 kgcm²
Permissible axial shaft load
70 N
Conforms to standard
IEC 60034
Electrical connection 1, connection type
Hybrid plug
Rotor position sensor for manufacturer designation
ECI 1118
Contamination level
2
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. installation height
4000 m
Storage lifetime, under nominal conditions
20000 h
Standstill torque constant
0.53 Nm/A
Thermal time constant
41 min
Nominal rotary speed
3000 1/min
Motor nominal power
350 W
Type of winding switch
Star inside
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Permissible radial shaft load
350 N
Product weight
1530 g
Number of pole pairs
5
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder for positional values per revolution
262144
Rotor position sensor
Absolute encoder, single-turn
Max. rotational speed
11800 1/min
Nominal operating voltage DC
565 V
Phase-phase winding resistance
4.85 Ohm
Rating class according to EN 60034-1
S1
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Nominal torque
1.1 Nm
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

5242208 Related Documents