5242205 Festo Servo Motors

Product Details

• Electrical connection for input 1, connection pattern
  00995913
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Detent torque
  < 1.0% of peak torque
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Measuring flange
  250 x 250 x 15 mm, steel
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Contamination level
  2
• Motor type as per EN 60034-7
  IM B5 IM V3
• Certificate issuing authority
  UL E342973
• Storage lifetime, under nominal conditions
  20000 h
• Standstill torque constant
  0.53 Nm/A
• Thermal resistance
  1.1 K/W
• Rotor position sensor
  Absolute encoder, multi-turn
• Max. rotational speed
  6800 1/min
• Rotor position sensor resolution
  19 bit
• Winding inductance phase-phase
  11 mH
• Voltage constant, phase-to-phase
  32 mVmin
• Relative air humidity
  0 - 90 %
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Peak torque
  3.4 Nm
Product weight
1530 g
Electrical connection 1, connection type
Hybrid plug
Mounting position
Any
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Electrical connection 1, number of pins/wires
15
Rotor position encoder for DC operating voltage
5 V
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Type code
EMMT-AS
Rotor position sensor measuring principle
Inductive
Continuous stall current
2.7 A
Motor nominal current
2.4 A
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Stall torque
1.24 Nm
MTTF, subcomponent
190 years, rotor position sensor
Electrical connection 1, connection technology
M23x1
Rotor position sensor for manufacturer designation
EQI 1131
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Balancing quality
G 2.5
Max. installation height
4000 m
Electric time constant
2.7 ms
Winding longitudinal inductivity Ld (phase)
7 mH
Thermal class according to EN 60034-1
F
MTTFd, subcomponent
380 years, rotor position sensor
Conforms to standard
IEC 60034
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Cross inductivity Lq (phase)
8.2 mH
Rotor position encoder for absolutely detectable revolutions
4096
Thermal time constant
41 min
Rotor position sensor interface
EnDat® 22
Motor constants
0.45 Nm/A
Motor nominal power
350 W
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Nominal torque
1.1 Nm
Permissible radial shaft load
350 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. winding temperature
155 °C
Max. mechanical speed
16000 1/min
Number of pole pairs
5
Rotor position encoder for positional values per revolution
524288
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal rotary speed
3000 1/min
Nominal operating voltage DC
325 V
Phase-phase winding resistance
4.85 Ohm
Peak current
11 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Total output inertia moment
0.286 kgcm²
Permissible axial shaft load
70 N
Interface code, motor out
60P

5242205 Related Documents