5242204 Festo Servo Motors

Product Details

• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Measuring flange
  250 x 250 x 15 mm, steel
• Rotor position encoder for DC operating voltage
  5 V
• Standstill torque constant
  0.53 Nm/A
• Rotor position encoder system accuracy angle measurement
  -120 arcsec ... 120 arcsec
• Rotor position sensor interface
  EnDat® 22
• Max. rotational speed
  6800 1/min
• Nominal operating voltage DC
  325 V
• Type of winding switch
  Star inside
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Ambient temperature
  -15 °C ... 40 °C
• Total output inertia moment
  0.286 kgcm²
• Permissible radial shaft load
  350 N
• Product weight
  1530 g
• Detent torque
  < 1.0% of peak torque
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Electrical connection 1, number of pins/wires
  15
• Max. mechanical speed
  16000 1/min
• Rotor position encoder for positional values per revolution
  262144
• Nominal rotary speed
  3000 1/min
Rotor position sensor resolution
18 bit
Voltage constant, phase-to-phase
32 mVmin
Relative air humidity
0 - 90 %
Degree of protection
IP40
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Certificate issuing authority
UL E342973
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal resistance
1.1 K/W
Rotor position sensor
Absolute encoder, single-turn
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor nominal current
2.4 A
Phase-phase winding resistance
4.85 Ohm
Corrosion resistance class (CRC)
0 - No corrosion stress
Peak torque
3.4 Nm
Permissible axial shaft load
70 N
Conforms to standard
IEC 60034
Electrical connection 1, connection type
Hybrid plug
Rotor position sensor for manufacturer designation
ECI 1118
Contamination level
2
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Cross inductivity Lq (phase)
8.2 mH
Rotor position encoder for absolutely detectable revolutions
1
Type code
EMMT-AS
Continuous stall current
2.7 A
Rating class according to EN 60034-1
S1
Certification
RCM compliance mark c UL us - Recognized (OL)
Stall torque
1.24 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Electrical connection 1, connection technology
M23x1
Electrical connection for input 1, connection pattern
00995913
Mounting position
Any
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Balancing quality
G 2.5
Max. winding temperature
155 °C
Electric time constant
2.7 ms
Number of pole pairs
5
Winding longitudinal inductivity Ld (phase)
7 mH
Thermal time constant
41 min
Rotor position sensor measuring principle
Inductive
Motor constants
0.45 Nm/A
Motor nominal power
350 W
Winding inductance phase-phase
11 mH
Peak current
11 A
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Nominal torque
1.1 Nm
Interface code, motor out
60P

5242204 Related Documents