5242198 Festo Servo Motors

Product Details

• Electrical connection for input 1, connection pattern
  00995913
• Rotor position sensor for manufacturer designation
  ECI 1118
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Electrical connection 1, connection type
  Hybrid plug
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Electrical connection 1, number of pins/wires
  15
• Max. brake no-load speed
  10000 1/min
• Brake current consumption
  0.46 A
• Storage lifetime, under nominal conditions
  20000 h
• Electric time constant
  2.1 ms
• Winding longitudinal inductivity Ld (phase)
  13 mH
• Rotor position encoder for positional values per revolution
  262144
• Thermal time constant
  41 min
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
• Brake power consumption
  11 W
• Motor nominal current
  1.4 A
• Peak current
  5.4 A
• Rating class according to EN 60034-1
  S1
• Degree of protection
  IP40
Peak torque
1.6 Nm
Electrical connection 1, connection technology
M23x1
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Balancing quality
G 2.5
Max. winding temperature
155 °C
Rotor position encoder for DC operating voltage
5 V
Rotor position sensor interface
EnDat® 22
Continuous stall current
1.6 A
Motor nominal power
190 W
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Brake holding torque
2.5 Nm
Permissible radial shaft load
350 N
Conforms to standard
IEC 60034
Detent torque
< 1.0% of peak torque
Mounting position
Any
Contamination level
2
Certificate issuing authority
UL E342973
Brake airflow
0.33 A
Brake coil inductivity
700 mH
Number of pole pairs
5
Max. brake friction work
5600 J
Cross inductivity Lq (phase)
15.5 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Max. rotational speed
7100 1/min
Nominal operating voltage DC
325 V
Rotor position sensor resolution
18 bit
Winding inductance phase-phase
21 mH
Relative air humidity
0 - 90 %
Thermal class according to EN 60034-1
F
Brake mass moment of inertia
0.074 kgcm²
MTTFd, subcomponent
380 years, rotor position sensor
Interface code, motor out
60P
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Max. mechanical speed
16000 1/min
Brake closing time
10 ms
Brake separation time
≤ 35 ms
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal resistance
1.5 K/W
Type code
EMMT-AS
Rotor position sensor measuring principle
Inductive
Brake DC operating voltage
24 V
Voltage constant, phase-to-phase
29.9 mVmin
Storage temperature
-20 °C ... 70 °C
Total output inertia moment
0.257 kgcm²
Permissible axial shaft load
70 N
Product weight
1500 g
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Measuring flange
250 x 250 x 15 mm, steel
Brake coil resistance
52.4 Ohm
Brake stopping current
0.33 A
DC brake response delay
≤ 2 ms
Rotor position encoder for absolutely detectable revolutions
1
Standstill torque constant
0.49 Nm/A
Rotor position sensor
Absolute encoder, single-turn
Nominal rotary speed
3000 1/min
Motor constants
0.41 Nm/A
Phase-phase winding resistance
11.7 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
-15 °C ... 40 °C
Nominal torque
0.6 Nm
Stall torque
0.66 Nm
Switching cycles, holding brake
10 million idle actuations (without friction work!)
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Related documents 5242198 Specs