Powermatic Associates Logo

DELP-111E Banner Cordsets

DELP-111E on Powermatic Associates
Banner

Part#:DELP-111E

Manufacturer:Banner

Alt. Part#:80803

Product Lifecycle:Active

Get a quick Quote!

Cordset: Double Ended LP-Custom; 11-pin Straight Male; 11-pin Straight Male; 0.3 m 11x24 Yellow PVC Jacket; Nylon Black Coupling Nuts

About the manufacturer: Banner is one of the manufacturers that offers Cordsets that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the DELP-111E Banner price in the box on the right side or send a quick quote.

Product Details

  • Weight
    4.53592 g
  • Country Of Origin
    TW
  • Feature: Hazardous Area
    No
  • Secondary Number of Conductors
    11
  • Oil/Grease Resistant
    No
  • Secondary Gender
    Male
  • Secondary AWG
    24
  • Secondary Orientation
    Straight
  • Secondary Coupling Method
    LP-Custom
  • Secondary Connector Type
    LP-Custom
  • Primary AWG
    24
  • Primary Number of Conductors
    11
  • Primary Gender
    Male
  • Primary Orientation
    Straight
  • Primary Coupling Method
    LP-Custom
  • Primary Connector Type
    LP-Custom
  • IP Rating
    IP67
  • Shield/No Shield
    No Shield
  • Coupling Material/Color
    Custom
  • Maximum Temp. (°C)
    55
  • Trunk Length (m)
    No Trunk
  • Cordset Length (m)
    0.3
  • Voltage Rating (V)
    60 V ac/75 V dc
  • Current Rating (A)
    2.0
  • Outside Cable Diameter (mm)
    6
  • Connector Body Material/Color
    PUR Black
  • Number of Connectors
    2
  • Cable Jacket Color
    Yellow
  • Cable Jacket Material
    PVC
  • Number of Contacts
    11

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

DELP-111E Description

Banner Engineering DELP-111E is a pre-assembled, double-ended cable or cordset designed for various automation applications. It features 2 x 11-pin LP male connectors and is constructed from PVC cable with a yellow sheathing. The cable has a diameter of 6mm and a length of 1ft or 300mm. It is designed to operate in ambient air temperatures up to +55°C and offers a degree of protection rated at IP67, making it suitable for environments where dust and water resistance are necessary. The DELP-111E is rated for a voltage of 60Vac and 75Vdc, accommodating a range of electrical requirements.

Manufacturer warranty

$35.00

Request a quote, and we will send availability within minutes.

Select Qty:

$35.00

$35.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17