Powermatic Associates Logo

LGL36600U44X Schneider Electric Industrial Automation Components

LGL36600U44X on Powermatic Associates
Schneider Electric

Part#:LGL36600U44X

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Square D by Schneider Electric LGL36600U44X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, featuring a PowerPact L-Frame 600 Micrologic 6.3A (LSIG) design. It is a 3-pole (3P) device with a rated current of 600A and a rated insulation voltage (Ui) of 750 V. The rated voltage (AC) is 600Vac 600Y/347Vac. This unit is designed for individual unit mount on plate, with a net height of 382 mm, width of 153 mm, and depth of 171 mm. It offers an IP40 degree of protection and operates manually via a toggle. The connection type includes lugs on both load and line sides. Protection functions include Long-time (L), Short-time with fixed time delay (S), Instantaneous (I), Ground fault (G), and Zone Selective Interlocking (ZSI). Protection settings are adjustable, with L protection against overload adjustable from 0.3 to 1 x In (50A to 150A), S protection against short-circuit with time delay adjustable from 1.5 to 10 x Ir (900A to 6000A), I instantaneous protection against short-circuit adjustable from 1.5 to 11 x In (900A to 6600A), and G protection against earth fault adjustable at 0.2 to 1 x In (0.1 to 0.4s time delay). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 600 AT, with a frame current rating of 600 AF. The short circuit breaking rating varies by voltage, with 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 500Vdc, all according to UL489 standards. The trip unit type features electronic technology with a Micrologic 6.3A (LSIG) series, providing LSIG protection and an LCD display. Measurement functions include current measurements for phases and neutral, RMS instantaneous current, current unbalance between phases, highest RMS current of the 3 phases, ground fault current, and demand/peak current values, with a calculation window adjustable between 5-60 minutes. The utilisation category is A.

Product Details

  • Electrical Connection
    Lugs load Lugs line
  • Depth
    6.61 in (167.89 mm)
  • Continuous Current Rating
    80 %
  • Width
    5.5 in (139.70 mm)
  • Height
    11.3 in (287.02 mm)
  • Terminal Identifier
    AL600LS52K3
  • Tightening Torque
    442.54 lbf.in (50 N.m) 0.11…0.37 in² (70…240 mm²) (AWG 2/0...500 kcmil)
  • Magnetic Tripping Current
    875…1750 A
  • Breaking Capacity Code
    G
  • Product Or Component Type
    Circuit breaker
  • Number Of Poles
    3P

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LGL36600U44X on Powermatic Associates is $10,980.00. Order now.

LGL36600U44X Related Documents

Instruction Sheet-1631038628596.pdfProduct Datasheet-1631038628545.pdf

Similar products from: Schneider Electric Industrial Automation Components

MG17444 on Powermatic Associates

MG17444

Schneider Electric

Schneider Electric MG17444 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. This 2-pole MCB is rated for a current of 5A and has an operating voltage (Ue) of 480V. It features a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 480Y/277Vac, and 10kA AIR at 125Vdc. Both poles are protected, and it utilizes a C tripping curve.

2 in stock
LC1D506G7 on Powermatic Associates

LC1D506G7

Schneider Electric

Schneider Electric LC1D506G7 is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 80A (AC-1) and 50A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and offers a degree of protection of IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 15kW at 220-230Vac to 33kW at 660-690Vac, all in AC-3 category. The rated power (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of this contactor is rated at 15 million operations at no load, and it supports a phase-to-phase rated voltage (AC) of 690 V.

1 in stock
LC1DT20BL on Powermatic Associates

LC1DT20BL

Schneider Electric

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

2 in stock
LC1D95G7 on Powermatic Associates

LC1D95G7

Schneider Electric

Schneider Electric LC1D95G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at up to 440Vac, reaching 55kW at 500Vac, and maintaining 45kW at 660-690Vac and 1000Vac, all in AC-3 category. The rated power (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D95G7 is rated at 4,000,000 operations, with an electrical durability (with load) of 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

11 in stock
AZ5DE015 on Powermatic Associates

AZ5DE015

Schneider Electric

Schneider Electric - AZ5DE015

93 in stock
3100800401 on Powermatic Associates

3100800401

Schneider Electric

Flange Mounted Handle Gasket

1 in stock

Manufacturer warranty

LGL36600U44X Schneider Electric

$10,980.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$10,980.00

$10,980.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LGL36600U44X with other Industrial Automation Components products

Electrical Connection

Depth

Continuous Current Rating

Width

Height

Terminal Identifier

Tightening Torque

Magnetic Tripping Current

Breaking Capacity Code

Product Or Component Type

Selected product

LGL36600U44X
Backordered
LGL36600U44X
Schneider Electric

Square D by Schneider Electric LGL36600U44X is a Moulded Case Circuit Breaker (MCCB) within the Powe...

Electrical ConnectionLugs load Lugs line

Depth6.61 in (167.89 mm)

Continuous Current Rating80 %

Width5.5 in (139.70 mm)

Height11.3 in (287.02 mm)

Terminal IdentifierAL600LS52K3

Tightening Torque442.54 lbf.in (50 N.m) 0.11…...

Magnetic Tripping Current875…1750 A

Breaking Capacity CodeG

Product Or Component TypeCircuit breaker

LGL36400U31X
4 in stock
LGL36400U31X
Schneider Electric

Square D by Schneider Electric LGL36400U31X is a Moulded Case Circuit Breaker (MCCB) within the Powe...

Electrical ConnectionLugs load Lugs line

Depth6.61 in (167.89 mm)

Continuous Current Rating80 %

Width5.5 in (139.70 mm)

Height11.3 in (287.02 mm)

Terminal IdentifierAL600LS52K3

Tightening Torque442.54 lbf.in (50 N.m) 0.11…...

Magnetic Tripping Current-

Breaking Capacity CodeG

Product Or Component TypeCircuit breaker

LDL36600U31X
2 in stock
LDL36600U31X
Schneider Electric

Square D by Schneider Electric LDL36600U31X is a Moulded Case Circuit Breaker (MCCB) from the PowerP...

Electrical ConnectionLugs load Lugs line

Depth6.61 in (167.89 mm)

Continuous Current Rating80 %

Width5.5 in (139.70 mm)

Height11.3 in (287.02 mm)

Terminal IdentifierAL600LS52K3

Tightening Torque442.54 lbf.in (50 N.m) 0.11…...

Magnetic Tripping Current-

Breaking Capacity CodeD

Product Or Component TypeCircuit breaker

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

LGL36600U53XENAAUOYH1 on Powermatic Associates

LGL36600U53XENAAUOYH1

Verified stock: 2

Square D by Schneider Electric LGL36600U53XENAAUOYH1 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range. It features a factory-installed 24Vdc undervoltage (U/V) trip release coil and a factory-installed 1A/1B (1NO+1NC) auxiliary switch OF wire harness. Designed for PowerPacT L-Frame, this 3-pole (3P) breaker has a rated current of 600A and operates at a rated voltage of 600Vac and 600Y/347Vac, with a rated insulation voltage (Ui) of 750V. It offers long-time (L), short-time with fixed time delay (S), instantaneous (I), and Zone Selective Interlocking (ZSI) protection functions. The breaker is equipped with lugs on both load and line sides for connection and is designed for individual unit mount on plate. It has a net height of 382mm, width of 153mm, depth of 171mm, and offers a degree of protection of IP40. The operating mode is manual toggle, with protection settings adjustable for overload, short-circuit with time delay, and instantaneous protection against short-circuit. The control voltage for the undervoltage trip coil allows circuit breaker opening at 35% to 70% of its rated control voltage, with closing permitted when the supply voltage reaches 85% of rated control voltage. The rated operating voltage (Ue) is 690V, with a rated impulse voltage (Uimp) of 8kV. The trip current rating is 600 AT, with a frame current rating of 600 AF. It has a short circuit breaking rating of up to 65kA at 240Vac under UL489 standards. The trip unit type is an electronic Micrologic Energy 5.3E (LSI) with an LCD display, offering comprehensive measurement functions for current, voltage, power, energy metering, power quality, and harmonic analysis. The utilisation category is A.

Schneider Electric

LGL36400U31X on Powermatic Associates

LGL36400U31X

Verified stock: 4

Square D by Schneider Electric LGL36400U31X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, featuring a PowerPact L-Frame 600 Micrologic 3.3 (LI) design. It is a 3-pole (3P) device with a rated current of 400A and a rated insulation voltage (Ui) of 750 V. The rated voltage (AC) is 600Vac 600Y/347Vac, and it supports a mounting mode of individual unit mount on plate. The dimensions include a net height of 382 mm, a net width of 153 mm, and a net depth of 171 mm. It offers a degree of protection of IP40 and operates manually via a toggle. The protection functions include L (Long-time protection) and I (Instantaneous protection), with protection settings adjustable for overload (0.3...1 x In, 125A...400A) and instantaneous protection against short-circuit (1.5...12 x In, 600A...4800A). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 400 AT, and the frame current rating is 600 AF. The short circuit breaking rating varies with voltage, up to 65kA at 240Vac under UL489 standards. Connection type is lugs on both load and line sides, and the trip unit type is an electronic Micrologic Standard 3.3 (LI) with no display, categorized under utilisation category A.

Schneider Electric

LGL36400CU44X on Powermatic Associates

LGL36400CU44X

Verified stock: 0

Square D by Schneider Electric LGL36400CU44X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, designed as a PowerPact L-Frame 600 Micrologic 6.3A (LSIG) 3P 400A 600Vac 18kA with lugs 100% rated for connections on both load and line sides. It features three poles (3P) and offers protection functions including Long-time (L), Short-time with fixed time delay (S), Instantaneous (I), Ground fault (G), and Zone Selective Interlocking (ZSI). The rated current is 400A, with a rated insulation voltage (Ui) of 750 V, and a rated voltage (AC) of 600Vac 600Y/347Vac. It is designed for individual unit mount on plate, with dimensions of 382 mm in height, 153 mm in width, and 171 mm in depth, and has an IP40 degree of protection. The operating mode is manual toggle, with protection settings adjustable for overload (L), short-circuit with time delay (S), instantaneous protection against short-circuit (I), and earth fault (G). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 400 AT, with a frame current rating of 600 AF, and a short circuit breaking rating varying from 65kA at 240Vac to 20kA at 500Vdc, according to UL489 standards. The trip unit type features electronic technology with a Micrologic 6.3A (LSIG) series, providing LSIG protection and an LCD display. Its measurement function includes current measurements for phases and neutral, RMS instantaneous current, current unbalance between phases, highest RMS current of the 3 phases, ground fault current, and demand/peak current values on all 3 phases plus neutral, with a calculation window adjustable between 5-60 minutes. The utilisation category is A.

Schneider Electric

LGL36400CU33X on Powermatic Associates

LGL36400CU33X

Verified stock: 0

Square D by Schneider Electric LGL36400CU33X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, designed as a PowerPact L-Frame 600 Micrologic 3.3S (LSI) with 3 poles (3P) and a rated current of 400A. It operates at a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. This unit features lugs on both load and line sides for connection, offers long-time (L), short-time with fixed time delay (S), and instantaneous (I) protection functions, and supports a mounting mode of individual unit mount on plate. The MCCB has a net height of 382 mm, width of 153 mm, depth of 171 mm, and provides a degree of protection of IP40 with a toggle (manual) operating mode. Protection settings include adjustable overload protection (0.3...1 x In, 125A...400A), short-circuit protection with time delay (1.5...10 x lr, 600A...4000A), and instantaneous protection against short-circuit (1.5...12 x In, 600A...4800A). It features a rated operating voltage (Ue) of 690 V, rated impulse voltage (Uimp) of 8 kV, a trip current rating of 400 AT, a frame current rating of 600 AF, and a short circuit breaking rating that varies by voltage level, with a maximum of 65kA at 240Vac under UL489 standards. The trip unit type is an electronic Micrologic Standard 3.3S (LSI) without a display, categorized under utilisation category A.

Schneider Electric

FAQ

What is the price of LGL36600U44X?
Purchase the LGL36600U44X from Powermatic Associates at the price of $10,980.00. Order today.

Out if stock but available for backorder.

Square D by Schneider Electric LGL36600U44X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, featuring a PowerPact L-Frame 600 Micrologic 6.3A (LSIG) design. It is a 3-pole (3P) device with a rated current of 600A and a rated insulation voltage (Ui) of 750 V. The rated voltage (AC) is 600Vac 600Y/347Vac. This unit is designed for individual unit mount on plate, with a net height of 382 mm, width of 153 mm, and depth of 171 mm. It offers an IP40 degree of protection and operates manually via a toggle. The connection type includes lugs on both load and line sides. Protection functions include Long-time (L), Short-time with fixed time delay (S), Instantaneous (I), Ground fault (G), and Zone Selective Interlocking (ZSI). Protection settings are adjustable, with L protection against overload adjustable from 0.3 to 1 x In (50A to 150A), S protection against short-circuit with time delay adjustable from 1.5 to 10 x Ir (900A to 6000A), I instantaneous protection against short-circuit adjustable from 1.5 to 11 x In (900A to 6600A), and G protection against earth fault adjustable at 0.2 to 1 x In (0.1 to 0.4s time delay). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 600 AT, with a frame current rating of 600 AF. The short circuit breaking rating varies by voltage, with 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 500Vdc, all according to UL489 standards. The trip unit type features electronic technology with a Micrologic 6.3A (LSIG) series, providing LSIG protection and an LCD display. Measurement functions include current measurements for phases and neutral, RMS instantaneous current, current unbalance between phases, highest RMS current of the 3 phases, ground fault current, and demand/peak current values, with a calculation window adjustable between 5-60 minutes. The utilisation category is A.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock