Powermatic Associates Logo

HGL36100U54X Schneider Electric Electronic Components

HGL36100U54X on Powermatic Associates
Schneider Electric

Part#:HGL36100U54X

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Circuit breaker, PowerPacT H, Micrologic 6.2E, unit mount, 100A, 3 pole, 18 kA, 600 VAC, 80% rated

Product Details

  • Electrical Connection
    Lugs load Lugs line
  • Continuous Current Rating
    80 %
  • Width
    4.12 in (104.65 mm)
  • Depth
    4.36 in (110.74 mm)
  • Height
    6.4 in (162.56 mm)
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.15 in² (2.5…95 mm²) (AWG 14...AWG 3/0)
  • Breaking Capacity Code
    G
  • Product Or Component Type
    Circuit breaker
  • Range Of Product
    PowerPact H
  • Number Of Poles
    3P
  • Line Rated Current
    100 A
  • Mounting Mode
    Unit mount

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

HGL36100U54X Related Documents

Product Datasheet-1631041174497.pdf

Similar products from: Schneider Electric Electronic Components

LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

1 in stock

Manufacturer warranty

HGL36100U54X Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HGL36100U54X with other Electronic Components products

Electrical Connection

Continuous Current Rating

Width

Depth

Height

Tightening Torque

Breaking Capacity Code

Product Or Component Type

Range Of Product

Number Of Poles

Selected product

HGL36100U54X
Backordered
HGL36100U54X
Schneider Electric

Circuit breaker, PowerPacT H, Micrologic 6.2E, unit mount, 100A, 3 pole, 18 kA, 600 VAC, 80% rated

Electrical ConnectionLugs load Lugs line

Continuous Current Rating80 %

Width4.12 in (104.65 mm)

Depth4.36 in (110.74 mm)

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Breaking Capacity CodeG

Product Or Component TypeCircuit breaker

Range Of ProductPowerPact H

Number Of Poles3P

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Continuous Current Rating80 %

Width4.12 in (104.65 mm)

Depth4.36 in (110.74 mm)

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Breaking Capacity CodeD

Product Or Component TypeCircuit breaker

Range Of ProductPowerPact H

Number Of Poles3P

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Continuous Current Rating80 %

Width3.19 in (81 mm)

Depth3.15 in (80 mm)

Height5.39 in (137 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Breaking Capacity CodeJ

Product Or Component TypeCircuit breaker

Range Of Product-

Number Of Poles3P

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

HGL36150U33X on Powermatic Associates

HGL36150U33X

Verified stock: 2

Square D by Schneider Electric HGL36150U33X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range, featuring a PowerPact H-Frame 150 Micrologic 3.2S (LSI) design. It is a 3-pole (3P) device with a rated current of 150A and offers a connection type with lugs on both load and line sides. This unit is designed for individual unit mount on plate, with a net height of 163 mm, width of 104 mm, and depth of 86 mm. It operates with a toggle (manual) mechanism and provides protection functions including Long-time (L), Short-time with fixed time delay (S), and Instantaneous (I) protection. The rated insulation voltage (Ui) is 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 500Vdc. The degree of protection is IP40. Protection settings are adjustable for overload (0.3...1 x In), short-circuit with time delay (1.5...10 x lr), and instantaneous short-circuit protection (1.5...15 x In). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 150 AT, with a frame current rating of 150 AF. Short circuit breaking ratings include 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489 standards. The trip unit type is an electronic Micrologic Standard 3.2S (LSI) without a display, categorized under Utilisation category A.

Schneider Electric

HGL36020 on Powermatic Associates

HGL36020

Verified stock: 2

Square D by Schneider Electric HGL36020 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range. It features a PowerPact H-Frame 150 TMD design with 3 poles (3P) and a rated current of 20A. This breaker is designed for 600Vac/500Vdc with a thermal protection for overload and magnetic protection for short-circuit, ensuring operation within its rated insulation voltage of 750 V and a rated voltage of 600Vac 600Y/347Vac. It supports a mounting mode of individual unit mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. The connection type includes lugs on both load and line sides, and it operates with a toggle (manual) mechanism. The degree of protection is IP40. Protection settings are over-current fixed at 20A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 20 AT, with a frame current rating of 150 AF. It has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

HGL36000S15SA on Powermatic Associates

HGL36000S15SA

Verified stock: 0

Square D by Schneider Electric HGL36000S15SA is a front-operated toggle moulded case non-fusible automatic switch-disconnector designed for individual unit mount on plate. It features a factory-installed 110-130Vac shunt trip release coil within the PowerPact H-Frame 150 TMD, supporting 3-poles (3P) with a rated current of 150A. The device operates at a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. It is equipped with lugs on both load and line sides for connection, ensuring a net height of 163 mm, width of 105 mm, and depth of 111 mm. The switch-disconnector offers a degree of protection of IP40 and operates manually via a toggle. It has a rated operating voltage (Ue) of 600 V, a rated impulse voltage (Uimp) of 8 kV, and a trip current rating of 150 AT with a frame current rating of 150 AF. Its short circuit breaking rating is specified at 65kA for 240Vac, 35kA for 480Vac and 480Y/277Vac, 18kA for 600Vac and 600Y/347Vac, and 20kA for both 250Vdc and 500Vdc, all under UL489. The utilisation category is A.

Schneider Electric

HGL36080T on Powermatic Associates

HGL36080T

Verified stock: 0

Square D by Schneider Electric HGL36080T is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range. It features a removable/interchangeable trip unit PowerPacT H-Frame 150 TMD with 3 poles (3P) and a rated current of 80A. This MCCB is designed for a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 500Vdc. It offers thermal protection for overload scenarios and magnetic protection for short-circuit conditions. The connection type includes lugs on both load and line sides, and it is designed for individual unit mount on plate. The net dimensions are 163 mm in height, 104 mm in width, and 86 mm in depth, with a degree of protection rated at IP40. The operating mode is manual toggle, and protection settings include over-current fixed at 80A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 80 AT, with a frame current rating of 150 AF. The short circuit breaking rating varies with voltage and is specified for both AC and DC applications. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

Circuit breaker, PowerPacT H, Micrologic 6.2E, unit mount, 100A, 3 pole, 18 kA, 600 VAC, 80% rated

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock