Powermatic Associates Logo

HGL36050M38X Schneider Electric Electronic Components

HGL36050M38X on Powermatic Associates
Schneider Electric

Part#:HGL36050M38X

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact H Circuit Breaker,MotorProtector,50A,3P,600V,18kA

Product Details

  • Electrical Connection
    Lugs load Lugs line
  • Height
    6.4 in (162.56 mm)
  • Width
    4.12 in (104.65 mm)
  • Depth
    4.36 in (110.74 mm)
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.15 in² (2.5…95 mm²) (AWG 14...AWG 3/0)
  • [Ith] Conventional Free Air Thermal Current
    14…25 A
  • Mounting Mode
    Unit mount
  • Number Of Poles
    3P
  • Line Rated Current
    50 A
  • Breaking Capacity Code
    G
  • Range Of Product
    PowerPact H
  • Product Or Component Type
    Motor Circuit Protector

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

HGL36050M38X Related Documents

Product Datasheet-1631042265352.pdfInstruction Sheet-1631042265361.pdf

Similar products from: Schneider Electric Electronic Components

LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

1 in stock

Manufacturer warranty

HGL36050M38X Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HGL36050M38X with other Electronic Components products

Electrical Connection

Height

Width

Depth

Tightening Torque

[Ith] Conventional Free A...

Mounting Mode

Number Of Poles

Line Rated Current

Breaking Capacity Code

Selected product

HGL36050M38X
Backordered
HGL36050M38X
Schneider Electric

PowerPact H Circuit Breaker,MotorProtector,50A,3P,600V,18kA

Electrical ConnectionLugs load Lugs line

Height6.4 in (162.56 mm)

Width4.12 in (104.65 mm)

Depth4.36 in (110.74 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

[Ith] Conventional Free Air Thermal Current14…25 A

Mounting ModeUnit mount

Number Of Poles3P

Line Rated Current50 A

Breaking Capacity CodeG

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Height6.4 in (162.56 mm)

Width4.12 in (104.65 mm)

Depth4.36 in (110.74 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

[Ith] Conventional Free Air Thermal Current-

Mounting ModeUnit mount

Number Of Poles3P

Line Rated Current50 A

Breaking Capacity CodeD

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Height5.39 in (137 mm)

Width3.19 in (81 mm)

Depth3.15 in (80 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

[Ith] Conventional Free Air Thermal Current-

Mounting ModeClip-on 35 mm symmetrical DI...

Number Of Poles3P

Line Rated Current35 A

Breaking Capacity CodeJ

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

HGL36150U33X on Powermatic Associates

HGL36150U33X

Verified stock: 2

Square D by Schneider Electric HGL36150U33X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range, featuring a PowerPact H-Frame 150 Micrologic 3.2S (LSI) design. It is a 3-pole (3P) device with a rated current of 150A and offers a connection type with lugs on both load and line sides. This unit is designed for individual unit mount on plate, with a net height of 163 mm, width of 104 mm, and depth of 86 mm. It operates with a toggle (manual) mechanism and provides protection functions including Long-time (L), Short-time with fixed time delay (S), and Instantaneous (I) protection. The rated insulation voltage (Ui) is 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 500Vdc. The degree of protection is IP40. Protection settings are adjustable for overload (0.3...1 x In), short-circuit with time delay (1.5...10 x lr), and instantaneous short-circuit protection (1.5...15 x In). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 150 AT, with a frame current rating of 150 AF. Short circuit breaking ratings include 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489 standards. The trip unit type is an electronic Micrologic Standard 3.2S (LSI) without a display, categorized under Utilisation category A.

Schneider Electric

HGL36020 on Powermatic Associates

HGL36020

Verified stock: 2

Square D by Schneider Electric HGL36020 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range. It features a PowerPact H-Frame 150 TMD design with 3 poles (3P) and a rated current of 20A. This breaker is designed for 600Vac/500Vdc with a thermal protection for overload and magnetic protection for short-circuit, ensuring operation within its rated insulation voltage of 750 V and a rated voltage of 600Vac 600Y/347Vac. It supports a mounting mode of individual unit mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. The connection type includes lugs on both load and line sides, and it operates with a toggle (manual) mechanism. The degree of protection is IP40. Protection settings are over-current fixed at 20A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 20 AT, with a frame current rating of 150 AF. It has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

HGL36000S15SA on Powermatic Associates

HGL36000S15SA

Verified stock: 0

Square D by Schneider Electric HGL36000S15SA is a front-operated toggle moulded case non-fusible automatic switch-disconnector designed for individual unit mount on plate. It features a factory-installed 110-130Vac shunt trip release coil within the PowerPact H-Frame 150 TMD, supporting 3-poles (3P) with a rated current of 150A. The device operates at a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. It is equipped with lugs on both load and line sides for connection, ensuring a net height of 163 mm, width of 105 mm, and depth of 111 mm. The switch-disconnector offers a degree of protection of IP40 and operates manually via a toggle. It has a rated operating voltage (Ue) of 600 V, a rated impulse voltage (Uimp) of 8 kV, and a trip current rating of 150 AT with a frame current rating of 150 AF. Its short circuit breaking rating is specified at 65kA for 240Vac, 35kA for 480Vac and 480Y/277Vac, 18kA for 600Vac and 600Y/347Vac, and 20kA for both 250Vdc and 500Vdc, all under UL489. The utilisation category is A.

Schneider Electric

HGL36080T on Powermatic Associates

HGL36080T

Verified stock: 0

Square D by Schneider Electric HGL36080T is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range. It features a removable/interchangeable trip unit PowerPacT H-Frame 150 TMD with 3 poles (3P) and a rated current of 80A. This MCCB is designed for a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 500Vdc. It offers thermal protection for overload scenarios and magnetic protection for short-circuit conditions. The connection type includes lugs on both load and line sides, and it is designed for individual unit mount on plate. The net dimensions are 163 mm in height, 104 mm in width, and 86 mm in depth, with a degree of protection rated at IP40. The operating mode is manual toggle, and protection settings include over-current fixed at 80A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 80 AT, with a frame current rating of 150 AF. The short circuit breaking rating varies with voltage and is specified for both AC and DC applications. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact H Circuit Breaker,MotorProtector,50A,3P,600V,18kA

Similar products from: Electronic Components

This item can ship within 24h!

T18SP6R on Powermatic Associates

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock